Yahoo Groups archive
Messages
Page 112 of 168 · 8362 messages matched
2004-11-24 by niall munnelly
On Wed, Nov 24, 2004 at 06:26:03PM +0000, Paul Maddox (Mail LIsts) wrote: > > And now a REAL test, in what film are two of the women called 'Alpha' and > 'beta', the 'femme-fatal' called "Helen Salinger" and the 'butch hero' > called "Kip Reissner". that's _cat women of the moon_
2004-11-24 by Paul Maddox (Mail LIsts)
Hi, > there are two "A"'s in "klaatu", if I remember correctly. there are in the > band's name, anyway. Name take from the main character in the 1951 film "The day the earth stood still", good film, good use of Theremin :-) > extra points if anyone can remember which song "still
2004-11-24 by Colin f
> Has anyone played about much with the aux D accumulator > acting on pattern length. I was > messing about with this last night getting some fantastic > effects ( mixed in with some > masking). > > I am a little baffled though on exactly what the numbers > refer to for the patte
2004-11-24 by arp1618
Hello to anybody listening, Has anyone played about much with the aux D accumulator acting on pattern length. I was messing about with this last night getting some fantastic effects ( mixed in with some masking). I am a little baffled though on exactly what the numbers refer to f
2004-11-24 by Gert van Santen
darkstr1746@comcast.net wrote: > I just love it when i hit the wrong button and my empty e-mail goes > into cyberville. Anyway, got my P3 the other day and boy is it a > beauty. Thanks Colin! > Being of the "i'm too cool for manuals" school. i dove right in. Uh > huh......yea, i'
2004-11-24 by colinfraser_com
> I know i'm real dense and i'm still turning pages in the manual so i > still might have some luck later on tonight, but............. can anyone > give me a swift kick in the arse here and bootload me into reality? P3 does come empty. It's not some Romahorg Groovebox, providing
2004-11-24 by darkstr1746@comcast.net
I just love it when i hit the wrong button and my empty e-mail goes into cyberville. Anyway, got my P3 the other day and boy is it a beauty. Thanks Colin! Being of the "i'm too cool for manuals" school. i dove right in. Uh huh......yea, i'm an idiot. I don't have much of a workin
2004-11-23 by ch.³l
> > I'm having trouble syncing the P3 with Cubase (version 3). > One reason I can think of for that behaviour is that the clock > coming from your PC may be very irregular. i think that's a cubase thing. if i'm not mistaken it has a notoriously irregular clock output. i always ha
2004-11-23 by Jesper
I'm having trouble syncing the P3 with Cubase (version 3). When I play from Cubase the P3 is slowly lagging more and more behind. The funny thing is, I have a Korg Electribe connected to the P3 midi out port, and it is running in perfect sync with Cubase. And the P3 together with
2004-11-23 by Colin f
Hi Jesper, > I'm having trouble syncing the P3 with Cubase (version 3). > When I play from Cubase the P3 is slowly lagging more and more behind. > > The funny thing is, I have a Korg Electribe connected to the > P3 midi out > port, and it is running in perfect sync with Cubase. >
2004-11-23 by ferrograph@aol.com
there are two "A"'s in "klaatu", if I remember correctly. there are in the band's name, anyway. extra points if anyone can remember which song "still stood still" is a line from. the pedant. (silently cursing his thoughtfulness towards colourblind co-worker because he has to tran
2004-11-23 by Colin f
Did I miss another message somewhere ??? > there are two "A"'s in "klaatu", if I remember correctly. I think so too - will need to check the titles on tDtESS DVD... > extra points if anyone can remember which song "still stood > still" is a line > from. Ooh, ooh, I know, I know..
2004-11-23 by colinfraser_com
Folks, www.colinfraser.com has now moved host. It may take a day or so more for the DNS changes to propogate, so if you can't see the website, that's why. The P3 pages have moved to www.p3sequencer.com and are active now. Email to colinfraser.com is working perfectly, though agai
2004-11-23 by Boele Gerkes
> Just to let you know that this is still a work in progress - I knocked > it up yesterday afternoon over a bottle of wine and made a few fixes > to the more glaring mistakes this morning. :-))))))) Fantastico Pablo! Boele
2004-11-22 by analogue-sequencer@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the analogue-sequencer group. File : /P3UserGuide.pdf Uploaded by : arglebargleuk Description : P3 User Guide (Acrobat format) You can access this file at the URL: http:
2004-11-21 by colinfraser_com
Folks, Production of the next run of P3s is still being finalised, but the factory have the engineering details for the case in a format they can read now (ahem), and I should be getting the order placed next week. Pricing for the production units will be finalised as soon as I h
2004-11-21 by analogue-sequencer@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the analogue-sequencer group. File : /P3UserGuide.doc Uploaded by : arglebargleuk Description : Updated User Guide - I was ashamed of it so added some basic screen diagr
2004-11-20 by Paul Maddox (Mail LIsts)
Paul/all, >> how bout a pdf. version? > > If I get it into a nice state I'm sure Colin can convert it for me. As an OSX user and with Microsoft office X, I can convert them to PDF, if someone would like to send me the document. I can return it as a PDF, though I can't upload to y
2004-11-20 by Peter Lunnon
I've just uploaded a PDF version of the User Guide having just discovered that OpenOffice has an 'Export to PDF' function - not only am I learning about the P3, I'm also learning how to use my Office suite at the same time. What a truly educational document it is ;) > > how bout
2004-11-20 by dayjob111
oops.. yeah.. the first time i downloaded it it got corrupted or something and looked real funky but it looks fine as a doc. the second time around :) thanks again --- In analogue-sequencer@yahoogroups.com, "Paul Maddox (Mail LIsts)" wrote: > Paul/all, > > >> how bout a pdf. vers
2004-11-20 by Paul Nagle
On Sat, 20 Nov 2004 21:57:30 -0000, "dayjob111" wrote: >this is a really cool thing to do :) and makes an excellent companion to the manual and is >great for people thinking about buying a P3 who want to know more about it's functions. >thanks. > >how bout a pdf. version? If I ge
2004-11-20 by dayjob111
this is a really cool thing to do :) and makes an excellent companion to the manual and is great for people thinking about buying a P3 who want to know more about it's functions. thanks. how bout a pdf. version? --- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > On Sa
2004-11-20 by Paul Nagle
On Sat, 20 Nov 2004 14:30:23 -0000, "Peter Lunnon" wrote: >That's great Paul, many many thanks for taking the time to write it - >I've just skimmed over it and it looks fantastically helpful. I'll be >working my way through it in more detail later but I've already had a >couple o
2004-11-20 by Peter Lunnon
That's great Paul, many many thanks for taking the time to write it - I've just skimmed over it and it looks fantastically helpful. I'll be working my way through it in more detail later but I've already had a couple of "ahhh, didn't realise it could do that!" moments. Excellent
2004-11-20 by Paul Nagle
On 20 Nov 2004 13:18:50 -0000, analogue-sequencer@yahoogroups.com wrote: >This email message is a notification to let you know that >a file has been uploaded to the Files area of the analogue-sequencer >group. > > File : /P3UserGuide.doc > Uploaded by : arglebargleuk > Descriptio
2004-11-20 by analogue-sequencer@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the analogue-sequencer group. File : /P3UserGuide.doc Uploaded by : arglebargleuk Description : Rough and ready version of a User Guide. You can access this file at the
2004-11-19 by Gert van Santen
Colin f wrote: > Folks, > > Just a reminder, if you are upgrading to the new firmware build, it > exceeds the maximum size P3 can load with the original bootloader. > The bootloader update image in Yahoo files will relocate the > bootloader as high in memory as possible to free u
2004-11-19 by Andy Wilson
Hi Gert, There's no problem with loading V3.982. *But* as Colin just said; Make sure you first run the 'bootloader update.syx' in the yahoo files section BEFORE loading V3.982. This reorganises the P3 memory. There is a bootloader text file which gives instructions. Hope this hel
2004-11-19 by Gert van Santen
Sorry for all these posts, guys. After a - not so good - night of sleep, I can only think of 2 reasons why my upgrade isn't working: 1. There is a problem with my P3. 2. There is something wrong with the online update. So, to rule out option 2; did anyone succesfully use the file
2004-11-19 by Colin f
Folks, Just a reminder, if you are upgrading to the new firmware build, it exceeds the maximum size P3 can load with the original bootloader. The bootloader update image in Yahoo files will relocate the bootloader as high in memory as possible to free up the maximum space for the
2004-11-19 by Gert van Santen
Gert van Santen wrote: > Gert van Santen wrote: >> No matter what I do, Mac OSX or PC, I'm getting BAD DATA during the >> last second. Now what do I do? > > Oh, and also Code CHK Error... Wel, it still doesn't work. And what's worse - I can't use the P3 anymore, because it boots
2004-11-19 by Gert van Santen
Gert van Santen wrote: > No matter what I do, Mac OSX or PC, I'm getting BAD DATA during the > last second. Now what do I do? Oh, and also Code CHK Error... :-( Gert www.waveworld.tv
2004-11-19 by Gert van Santen
No matter what I do, Mac OSX or PC, I'm getting BAD DATA during the last second. Now what do I do? Gert www.waveworld.tv
2004-11-19 by Alex
>> BTW, I'm on Mac OSX. http://www.snoize.com/SysExLibrarian/ very simple.
2004-11-18 by Gert van Santen
Mark Pulver wrote: > Gert van Santen (03:44 PM 11/18/2004) wrote: > >> How do I upgrade my P3 with the new firmware? >> >> Of course I have read this in the manual. But after I downloaded the >> syx-file, I couldn't load it into my sequencer. Do I need a special >> utility? BTW,
2004-11-18 by Gert van Santen
Colin f wrote: >> How do I upgrade my P3 with the new firmware? > > Boot into the firmware update mode by holding FUNC+PAGE at power on, > then press F3 for 'flash'. > Then transmit the .syx file, with at least 100ms gap between each > block - this should be configurable in your
2004-11-18 by Mark Pulver
Gert van Santen (03:44 PM 11/18/2004) wrote: >How do I upgrade my P3 with the new firmware? > >Of course I have read this in the manual. But after I downloaded the >syx-file, I couldn't load it into my sequencer. Do I need a special utility? >BTW, I'm on Mac OSX. You'll probably
2004-11-18 by Gert van Santen
Guys, How do I upgrade my P3 with the new firmware? Of course I have read this in the manual. But after I downloaded the syx-file, I couldn't load it into my sequencer. Do I need a special utility? BTW, I'm on Mac OSX. Anyone? Thanx! Gert www.waveworld.tv
2004-11-18 by Colin f
> How do I upgrade my P3 with the new firmware? Boot into the firmware update mode by holding FUNC+PAGE at power on, then press F3 for 'flash'. Then transmit the .syx file, with at least 100ms gap between each block - this should be configurable in your sysex utility. If not, you
2004-11-18 by bleep
On Thu, 18 Nov 2004, Paul Nagle wrote: > I look at it the other way round. It would be *really* useful to see > which gates are on when I'm setting auxes on. Then I know where there > are notes I want to work on... otherwise it's down to memory. ah, yes yes... it's been too long
2004-11-18 by Paul Nagle
On Thu, 18 Nov 2004 21:32:07 -0000, "Colin f" wrote: >To add this as a simple option to pattern edit mode wouldn't take long, >since there are already the necessary flags to hold each playlist. Useful. >But there's not really an obvious key combination left for it, and I'd >rathe
2004-11-18 by Paul Nagle
n Thu, 18 Nov 2004 22:15:18 +0100, Jesper wrote: > >Can I tell the sequencer to only play the pattern currently being edited >(and not cycle through the rest of the patterns in the playlist)? >When I have a playlist with four different patterns and want to work on >only one of th
2004-11-18 by Paul Nagle
On Thu, 18 Nov 2004 15:03:47 -0600 (CST), bleep wrote: >i'm not sure that would be consistent with the way things work... ties, >gates, xpose defeat, and skips are all binary values. using the LEDs to >show this information is easy and useful, but using them to indicate that >a v
2004-11-18 by Jesper
>There's an indirect way to do that - if you go into playlist edit and press >F1 to will hold the playlist. >Then you can edit the current pattern from there, and the playlist still >wont advance. This works very well and is all I need, but: Would it be possible to add a "Hold al
2004-11-18 by Colin f
> so... no gate + aux = green, gate OR tie + aux = amber; gate > OR tie = red > > how does this sound? A bit too complicated. I should have used RGB LEDs. Then there could have been 7 colours ;-) Cheers, Colin f
2004-11-18 by bleep
On Thu, 18 Nov 2004, Colin f wrote: > There's an indirect way to do that - if you go into playlist edit and press > F1 to will hold the playlist. > Then you can edit the current pattern from there, and the playlist still > wont advance. > > To add this as a simple option to patte
2004-11-18 by Jesper
>i'm not sure that would be consistent with the way things work... ties, >gates, xpose defeat, and skips are all binary values. using the LEDs to >show this information is easy and useful, but using them to indicate that >a value is present in the aux may not be. after all, auxes
2004-11-18 by Jesper
Can I tell the sequencer to only play the pattern currently being edited (and not cycle through the rest of the patterns in the playlist)? When I have a playlist with four different patterns and want to work on only one of the patterns (while the sequencer is running), I have to
2004-11-18 by bleep
On Thu, 18 Nov 2004, colinfraser_com wrote: > In pattern edit mode, the gate status on each step is always shown > in red, so you can see where the notes are. Active tie, skip and X > are shown in green, or amber on steps where gate is also active. > I was wondering if it would b
2004-11-18 by Jesper
>In pattern edit mode, the gate status on each step is always shown >in red, so you can see where the notes are. Active tie, skip and X >are shown in green, or amber on steps where gate is also active. >I was wondering if it would be an improvement if the aux statuses >for each s