Re: Oops
2004-10-06 by ch.³l
> v3.977 fixes the CC pass-thru bug spotted by Chiel. and once again it works just fine now. thnx. (good fun flashing both P3's simultaneously btw...:-)) grtz Chiel
Messages
Browse messages
Page 119 of 168 · 8362 messages matched
Re: [analogue-sequencer] Re: P3 - hardly finished
2004-10-06 by MAG
also problems with engravings by my p3 (they wanted Euro 130.-- for doing it!!!) so i bougt some foil for the inkjet for printing stickers, but i'm realy unhappy with it. now a friend will professionaly print letters onto it, its called 'siebdruck', sorry i don't know the english
RE: [analogue-sequencer] #73
2004-10-05 by Colin f
> what would be really helpful would be if one could be in playlist- > playback-track-record-multiple-pattern-overwrite mode & switch to > (over-)recording a different track just by selecting it. maybe from > the track selector buttons, or maybe by midi CC/PC? Do you mean you wan
RE: [analogue-sequencer] where to buy the kit
2004-10-05 by Colin f
Hi Ken, > can someone tell me where i can find info of buying a kit... At the moment, I'm out of stock of boards. The next board run will be ordered shortly. These will be slightly updated from the last run - I've had problems sourcing the step and keypad switches from Maplin (a
Re: P3 - hardly finished
2004-10-05 by Tom Adam
mmm HTML disabled.... Tom Adam wrote: > Hi, > > New to the list, but then I'm also still working on my P3. > > Some pics of my P3 box. > http://users.pandora.be/the-big-ear/temp/P3-1.JPG > http://users.pandora.be/the-big-ear/temp/P3-5.JPG > Still some work too do. > I was wonderi
where to buy the kit
2004-10-05 by kenwaldek
can someone tell me where i can find info of buying a kit... :::Now that I'm seriously considering a commercial run of P3, I needed to finalise a single case design suitable for desktop or rackmount use. The end result is not exactly as I'd like due to the limits of my metal fold
hello new here
2004-10-05 by kenwaldek
my name is ken waldek i'm dj/producer, i'm looking to build my own p3 hardware sequenser... first gone read all the messages then i will ask some things :d
Oops
2004-10-05 by colinfraser_com
v3.977 fixes the CC pass-thru bug spotted by Chiel. Cheers, Colin f
#73
2004-10-05 by ferrograph632
I just wrote a really really long e-mail about what we'd been doing in the "northern echo-south" with our new P3, & while I was previewing it I spotted a typo. being a bit of a pedant, I tried to back up & fix the typo, only to lose the entire spiel. serves me right for being ver
RE: [analogue-sequencer] Re: weird midi problem
2004-10-05 by Colin f
> hmmm... i appear to have developed a similar problem all of a sudden. > i have a chain starting with a microkontrol keyboard, passing through > P3a, then to P3b, to a roland a880 where it's all merged with a > drehbank and sent to the boxes. notes played on the microkontrol com
Re: weird midi problem
2004-10-05 by ch.³l
--- In analogue-sequencer@yahoogroups.com, "Colin f" wrote: > > How difficult is it to remove that resistor? Can you tell me > > which one > > it is? I'll ask Robert to remove it for me :-) > > The resistor in question is R3. > Try just snipping it off at the leads. > > Cheers, >
P3 & 808
2004-10-03 by Magnetize
Just got an 808 after putting it off for a long time :) However the sync with the P3 is all over the gaff. Im hoping this is just due to my inepititude with programming the 808 but ive tried many things at this stage and its not syncing properly. Its seems to be running at 4/3 ti
Re: [analogue-sequencer] Re: Important Letter for analogue-sequencer Members
2004-10-02 by Paul Maddox (Mail LIsts)
Colin, > I thought the new member approve might put people off who just wanted a > casual browse through the archives. Or give the 'casual member' a full list of email addresses. > The graphic of a word that must be entered to join the group *should* stop > spam-bots, but maybe t
Re: [analogue-sequencer] Re: Important Letter for analogue-sequencer Members
2004-10-02 by Paul Maddox (Mail LIsts)
Amanda, > When this is done, you don't have to provide *any* public information. Yahoo > keeps your real email address, and that's it. > > Thereupon you go can to a page of options and deselect all the spammy stuff > in the world that they would like to send you. It's very satisf
RE: [analogue-sequencer] Re: Important Letter for analogue-sequencer Members
2004-10-02 by Colin f
> Yahoo could certainly be better at explaining to people how > the system works. Indeed. I didn't know about the opt-in to ad mail for mail subscribers... > I've found that it's more fun to moderate by approving new > members than to > read and moderate first-mails. New members
Re: Important Letter for analogue-sequencer Members
2004-10-02 by cikira@cikira.com
Colin, One thing you can you to help members avoid spam is to advise them to create a Yahoo account (this is just a member profile, not an email account unless one is wanted) from which to join groups. When this is done, you don't have to provide *any* public information. Yahoo k
RE: [analogue-sequencer] P3 & 808
2004-10-02 by Colin f
> Just got an 808 after putting it off for a long time :) I picked one up myself a few months ago, and got a 909 to go with it in the last few weeks. :-) Both the 808 and 909 are slaved to the DIN sync output on my P3. > However the sync with the P3 is all over the gaff. > Im hop
Re: P3 & 808
2004-10-02 by magnetize15
Changed the sync cable, started from scratch again & she's syncing lovely now. Ive been too long without one of these beauties :) Thx for your help Colin. /m --- In analogue-sequencer@yahoogroups.com, "Colin f" > > My 808 usually runs in perfect sync with the P3, although sometim
Re: [analogue-sequencer] weird midi problem
2004-10-01 by Boele Gerkes
Colin, never mind my private mail to you. It is working fine now. I removed R3. My first DIY action on the P3 ;-) LOL! Thanks for all the replies guys! Boele Op 1-okt-04 om 18:16 heeft Colin f het volgende geschreven: > >> How difficult is it to remove that resistor? Can you tell
RE: [analogue-sequencer] weird midi problem
2004-10-01 by Colin f
> How difficult is it to remove that resistor? Can you tell me > which one > it is? I'll ask Robert to remove it for me :-) The resistor in question is R3. Try just snipping it off at the leads. Cheers, Colin f
Re: [analogue-sequencer] weird midi problem
2004-10-01 by Boele Gerkes
Hey Tony, Your suggestion did the trick! Thanks. Colin, How difficult is it to remove that resistor? Can you tell me which one it is? I'll ask Robert to remove it for me :-) Although it works now, in the end I really want the P3 on it's own midi-port, so not shared with any other
RE: [analogue-sequencer] Important Letter for analogue-sequencer Members
2004-10-01 by Colin f
> Can you fix this please.. Fixing it properly would involve shooting every moron in the world who responds to spam in the face. I'd prefer to leave membership open, so I've enabled moderation for new member posts. That should prevent spam but minimise admin effort. Cheers, Colin
RE: [analogue-sequencer] weird midi problem
2004-10-01 by Colin f
> > You could insert any 'midi through box' like a synth or whatever in > > place of the drum machine too. > > Good thinking! Thanks. Gonna try that this afternoon and will > let know if it > works. If itturns out to be an incompatibility between the merger output and P3 input, r
Re: [analogue-sequencer] weird midi problem
2004-10-01 by scd
on 01-10-2004 11:53, Oakley Sound at oakley@techrepairs.freeserve.co.uk wrote: > Try this using the drum machine as a buffer to 'boost' the signal: > > midi merger -> drum machine -> P3 -> to wherever > > I think the midi merger's signal is close the limits set by the midi > spec
Re: [analogue-sequencer] Important Letter for analogue-sequencer Members
2004-10-01 by Paul.Maddox.Mail-list@Synth.net
Colin, Can you fix this please.. It really pisses me off having to wade through junk mail.. Make it so that membership has to be authorized by the user and yourself. Paul
Re: [analogue-sequencer] weird midi problem
2004-10-01 by Oakley Sound
Try this using the drum machine as a buffer to 'boost' the signal: midi merger -> drum machine -> P3 -> to wherever I think the midi merger's signal is close the limits set by the midi spec. Some machines will work well with it. However, the P3's opto may not be quiet fast enough
Re: [analogue-sequencer] weird midi problem
2004-10-01 by scd
on 01-10-2004 08:42, MAG at magdesign_uk@yahoo.com wrote: Hi Mag, A midimerger merges two incoming midi signals (so really two cables) and outputs one. In my case, in the end, I want to merge the midiclock from my softwaresequencer with the note on/note off info from a controller
RE: [analogue-sequencer] weird midi problem
2004-10-01 by MAG
hi, have you ever tried it with a usb midi thing? (it dont know what a merger is, I'm using unitor8 and it works very well), our chain the p3 behind the jomox and also check that you don't mess around with the midi control ch numbers, for test purpose you should use ch1 on all de
Re: weird midi problem
2004-10-01 by ch.³l
> In other words, the midimerger filters something out that the P3 > needs, but all the other midiclock driven machines in my studio > does not need? have you checked the manual for the merger? and is it only using this one merger or with every merger? i have mine running through
RE: [analogue-sequencer] weird midi problem
2004-09-30 by Colin f
Very weird problem. My first thought was that the merger should only be accepting midi clock from one input. Depending on how it decides to switch between which input is active for clock, you may not always have clock passing through the merger as you expect. Assuming that's not
Re: [analogue-sequencer] weird midi problem
2004-09-30 by Robert van der Kamp
On Thursday 30 September 2004 16:45, Boele Gerkes wrote: > Colin, help (or any other one on this list) > > Logic controlling the P3 with midiclock: > > Logic -> midicable into P3: works perfectly > Logic-> midicable into midimerger->into P3: does not work > Logic-> midicable into
Re: [analogue-sequencer] weird midi problem
2004-09-30 by scd
on 30-09-2004 16:49, Paul Nagle at softroom@btinternet.com wrote: > If it's any help (probably isn't but I'm in a hurry), I use one of my > P3s with a MIDI merger - a Philip Rees one - and it works fine. You do > need to make sure which of the inputs it's connected to, just a qui
Re: [analogue-sequencer] weird midi problem
2004-09-30 by Paul Nagle
If it's any help (probably isn't but I'm in a hurry), I use one of my P3s with a MIDI merger - a Philip Rees one - and it works fine. You do need to make sure which of the inputs it's connected to, just a quirk of the merger I'm using. Maybe worth a shot? Paul On Thu, 30 Sep 2004
weird midi problem
2004-09-30 by Boele Gerkes
Colin, help (or any other one on this list) Logic controlling the P3 with midiclock: Logic -> midicable into P3: works perfectly Logic-> midicable into midimerger->into P3: does not work Logic-> midicable into midimerger->into Jomox Xbase: works perfectly (tempo sync en stop/star
Re: [analogue-sequencer] Loading 1 bank
2004-09-28 by Paul Nagle
Just wanted to say I finally got round to installing this - great! Totally ace for compiling "greatest hits" kinda stuff... Thanks so much! Paul On Mon, 20 Sep 2004 19:46:56 -0000, "Stoffel" wrote: >Hi there, > >i wrote a little programm, that allows kind of editing the P3 sysex
Little bug fix
2004-09-27 by colinfraser_com
Folks, Firmware build in files now fixes a fault in the initial bank program change message added when I switched to the two-key bank select - it was sending the value for the last bank rather than the new one. I'm back from holidays now, but managed to pick up bacterial conjunct
RE: [analogue-sequencer] Can't start my P3
2004-09-24 by Robert Holmström
Thanks for your replies! I have got it to work now, it was the single cable from the function board that was put in the wrong pin on the main board, that made the keypad not to work at all... Everything was ok after I managed to get into the flash menu and flash it. Thanks agin (
RE: [analogue-sequencer] Can't start my P3
2004-09-24 by Colin f
PS Robert, I´ll be home tomorrow, so if flashing doesn´t work, stick the CPU in the post today or tomorrow and I should be able to get it back to you early next week. Cheers, Colin f ________________________________________________ Message sent using UebiMiau 2.7.2
RE: [analogue-sequencer] Can't start my P3
2004-09-24 by Colin f
Robert, > What I get is the "check fail 63ED" message and the boot and flash > options, > but I can't get out of there. Do you mean you cant get it to boot, or it wont go to flash either ? The checksum error means the flash ROM has become corrupted somehow. This has happened in a
RE: [analogue-sequencer] Can't start my P3
2004-09-24 by MAG
just check all contacts and cables with an ohmmeter. take your time, i'm sure it'll work! check if all chips are the right way inside, compare with pics from colins webpage. once my p3 dindn't boot full 'coz there was not enough power....... good luck! mag Robert Holmstr'm wrote:
Re: [analogue-sequencer] Can't start my P3
2004-09-23 by bleep
On Thu, 23 Sep 2004, robert_holmstrom wrote: > I checked the manual and tried to hold down F1 and step 7 but nothing > happened (the same sequence was played again and stopped at all > lights on). I tried again and now something happened... the lightshow > didn't start and just t
Re: [analogue-sequencer] Can't start my P3
2004-09-23 by Julian
oops, that didnt read clearly it ment to read: "You coul try flashing the firmware, Thats assuming that the "flash" option works though. " j [Non-text portions of this message have been removed]
Re: [analogue-sequencer] Can't start my P3
2004-09-23 by Julian
The checksum thing is a check on the o/s in the firmware. Thats assuming that the "flash" option works though. Mine takes a long time to respond (yes, theres probably somthing not quite right with it, but it works... eventually) so try pressing flash, and then waiting 5 mins or s
RE: [analogue-sequencer] Can't start my P3
2004-09-23 by Robert Holmström
Hmmmm... just noticed that I get text... just had to turn the trim pot... What I get is the "check fail 63ED" message and the boot and flash options, but I can't get out of there. Do you think it can be the ribbon contact for the keypad? Should it answer to F1 or F3? Is there any
Re: Stupid newbie questions
2004-09-23 by philsmillie@yahoo.com
> A film tutorial would be coolest - one is under edit at the moment, > according to our esteemed Phil who is either doing it right now or > pottering with his P3. 8-) It's all behind schedule I'm afraid and I've no time for the next couple of weeks due to upcoming gig, not even
Can't start my P3
2004-09-23 by robert_holmstrom
Hello, I just finished my P3 and I can't get it to boot. First time I powered it up it did a small flash show and ended up with all lights on the step row on. Then I remembered I had read somewhere that a conbination of keys had to be held down the first time I power it up. I che
Case
2004-09-22 by MAG
okay freaks if anyone wants a new p3 case, the stainless one goes for Euro 450. order of more than one piece decreases the price. It includes case, siedewall, bottom, screws and if wanted rack angles. there is also a sticker set included (not shown @the pics). grz mag -----------
Re: [analogue-sequencer] Re: Loading 1 bank
2004-09-21 by Paul Nagle
On Tue, 21 Sep 2004 10:45:44 -0000, "roelp23" wrote: >--- In analogue-sequencer@yahoogroups.com, "Stoffel" >Hi Stoffel, > >Thanx for posting the programme. I tried it, and it works fine over >here, but I'm also using windows 2000. I'm really helped with this >utillity, thanx agai
Re: Loading 1 bank
2004-09-21 by roelp23
--- In analogue-sequencer@yahoogroups.com, "Stoffel" Hi Stoffel, Thanx for posting the programme. I tried it, and it works fine over here, but I'm also using windows 2000. I'm really helped with this utillity, thanx again! Cheers, Roel wrote: > Hi there, > > i wrote a little prog
Loading 1 bank
2004-09-20 by Stoffel
Hi there, i wrote a little programm, that allows kind of editing the P3 sysex files, as they are stored by midiox. Therefore I called it P3_OX. With this programm you cannot make sysex dumps, you still need midiox for that, but you can load the sysex files and then deal with them