Yahoo Groups archive
Messages
Page 37 of 168 · 8362 messages matched
2008-05-10 by acidmitch
> ---------------------------------------- > > From: turbotron69@... > > I agree, I just need two or 3 user definable chords, that´s minimal house. Your house isn't quite minimal if your using big 3 note chords. Pffft. There's 2 whole notes in there you don't need :)
2008-05-10 by DB
I would love to see what ever you could try.... Dave Colin Fraser wrote: > > > > There is a possibility I have considered to allow 'preset' chords to be > entered using only a single aux, and a 'chord' event. > That would take a single value to select the type of chord to play, >
2008-05-09 by Eric
Hi, I would be VERY happy with a number of preset chords too! Howmany presets do you think would fit? If there is space for 1 user defined chord per track that would be perfect of course... I've not tried this yet: On the RM1X there are ghost tracks if I recall correctly. These p
2008-05-09 by Hans Greuber
---------------------------------------- > From: turbotron69@hotmail.com > To: analogue-sequencer@yahoogroups.com > Subject: RE: [analogue-sequencer] Chords on P3 - idea > Date: Fri, 9 May 2008 18:42:46 +0200 > > > I agree, I just need two or 3 user definable chords, that´s minim
2008-05-09 by Hans Greuber
I agree, I just need two or 3 user definable chords, that´s minimal house.Don´t need to sequence an Angelo Baladamenti soundtrack with a P3 LOL Hans ________________________________ > To: analogue-sequencer@yahoogroups.com > From: lists@ericsmits.nl > Date: Fri, 9 May 2008 12:45:
2008-05-08 by Stuart Carroll
I would LOVE to see preset chords implemented even if it used all of the available codespace remaining. Or even a cut down 'demo' OS of this feature. s On 8/05/2008, at 10:50 AM, Colin Fraser wrote: > > > 3P is already polyphonic sequencer, why do I need to spend > > memory and t
2008-05-08 by Hans Greuber
I don´t thinks so. Colt AR-15 has both normal and lefty modes. Same with P3, chordy and diehard user mode! Hans ________________________________ > To: analogue-sequencer@yahoogroups.com > From: james@ticalun.net > Date: Thu, 8 May 2008 12:16:25 -0500 > Subject: RE: [analogue-sequ
2008-05-08 by James R. Coplin
Multiple code bases is a bad, bad, bad, bad, idea. Bad. James R. Coplin (郭杰明) *************************************** Work is the Curse of the Drinking Class *************************************** From: analogue-sequencer@yahoogroups.com [mailto:analogue-sequencer@yahoogroups.co
2008-05-08 by Hans Greuber
Well but as I said, Colin could do custom group user OS. I choose to delete some features that I never use in order to get space for this Hans Was nice the green tea by the way? ________________________________ > To: analogue-sequencer@yahoogroups.com > From: james@ticalun.net >
2008-05-08 by James R. Coplin
I would like it to make me a nice pot of tea as well but some things need to be out of scope… James R. Coplin (郭杰明) *************************************** Work is the Curse of the Drinking Class *************************************** From: analogue-sequencer@yahoogroups.com [ma
2008-05-08 by Hans Greuber
I would like to enter my own non musical chords rather than presets,too much limited! Hans ________________________________ > To: analogue-sequencer@yahoogroups.com > From: james@ticalun.net > Date: Thu, 8 May 2008 06:45:07 -0500 > Subject: RE: [analogue-sequencer] Chords on P3 >
2008-05-08 by syntaxdevelopment
Colin, Can you provide type information and supplier of the cherry keys you used in latest P3's? Thanks -Frank
2008-05-08 by James R. Coplin
The chord preset ideas seems a promising compromise, but how will this interact with the “force to scale” features? James R. Coplin (郭杰明) *************************************** Work is the Curse of the Drinking Class *************************************** From: analogue-sequenc
2008-05-08 by Zed Velkovich
There is a possibility I have considered to allow 'preset' chords to be entered using only a single aux, and a 'chord' event. That would take a single value to select the type of chord to play, with the main note value setting the root note. Yes please, using single AUX with pres
2008-05-08 by otison
well, I have never tried this dump-and-reload procedure ... I'm a fire-and-forget kind of musician, i.e when I produce a track on hardware, I usually don't backup patterns or patches... so I've never felt this sysex thing useful in the past so I can't really tell you. but I will
2008-05-08 by Hans Greuber
________________________________ > To: analogue-sequencer@yahoogroups.com > From: colin@sequentix.com > Date: Wed, 7 May 2008 23:50:04 +0100 > Subject: RE: [analogue-sequencer] Chords on P3 > > >> 3P is already polyphonic sequencer, why do I need to spend >> memory and tiiiimmmee
2008-05-07 by Colin Fraser
> 3P is already polyphonic sequencer, why do I need to spend > memory and tiiiimmmeee for 3 auxes, to get one chord (how for > 5-7 note chord)? > I would rather use auxes for midi delays, echoes, than just for chord. > It was the same with drone in the begining, p3 didnt have 13
2008-05-07 by mhz@io.com
These attach from the inside not the outside like the newer units $30USD Thanks
2008-05-07 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, jeff@... wrote: > > > For a while I've been trying to figure out how to do this maybe someone here with a Nord G2 and a P3 can help. Jeff, it could also be the way you have the THRU set on the P3. It can either rechannelize the MIDI comi
2008-05-07 by Hans Greuber
Sorry about my indian english folks, I forgot a lot! ---------------------------------------- > To: analogue-sequencer@yahoogroups.com > From: turbotron69@hotmail.com > Date: Wed, 7 May 2008 05:15:48 +0200 > Subject: RE: [analogue-sequencer] Chords on P3 > > > To me is the only f
2008-05-07 by Hans Greuber
To me is the only feature to have the ultimate minimal machine and say bye to computers forever. If there only a remaining code , If Colin agree it coul be a last update for us,lovers of that feature sacrifing all upcoming ones leaving other people right to choose delay etc. I co
2008-05-06 by josh
Possibly the midi ch. for each slot on the G2 is set to the same midi ch. as it's global midi ch.? On my NR3 I have slots A,B,C,D set to midi ch 1-4 respectively, and the global midi ch set to like 12 or something, which receives the performance changes. But then again I have my
2008-05-06 by DB
Hi Zed, Comments inline: Zed Velkovich wrote: >>3P is already polyphonic sequencer, I'm not sure if you are aware or not, but the P3 didn't start as a Polyphonic Step Sequencer. It started as a Monophonic Step Sequencer. Polyphony was added later. I remember when it was added and
2008-05-06 by jeff@arcosanti.org
For a while I've been trying to figure out how to do this maybe someone here with a Nord G2 and a P3 can help. When I set my G2 up so that it no longer has local control and route midi thru the P3 so I can use force to scale I get the problem where the knobs on the g2's control s
2008-05-06 by Hans Greuber
I agree! Hans ________________________________ > To: analogue-sequencer@yahoogroups.com > From: zedhok@yahoo.com > Date: Tue, 6 May 2008 04:12:55 -0700 > Subject: Re: [analogue-sequencer] Chords on P3 > > > 3P is already polyphonic sequencer, why do I need to spend memory and tii
2008-05-06 by Zed Velkovich
3P is already polyphonic sequencer, why do I need to spend memory and tiiiimmmeee for 3 auxes, to get one chord (how for 5-7 note chord)? I would rather use auxes for midi delays, echoes, than just for chord. It was the same with drone in the begining, p3 didnt have 13 lenght nit
2008-05-06 by Hans Greuber
Yes I knew that mode, but for non keyboardist,all sounded nonquantized and terrible, that is why I want a step chord mode. I hope Colin agree. Please Colin,answer me! I don´t want to sell mine to get P4, that is " betray" Hans ________________________________ > To: analogue-seque
2008-05-05 by Colin Fraser
What is the current version of the firmware in your P3 ? Are you able to dump and reload pattern data using the normal sysex option ? Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequentix.com > -----Original Message----- > From: analogue-sequencer@yahoogroup
2008-05-05 by ach_gott@yahoo.com
Here is what I would do. Load p3 tools onto a pc. Get all of the data onto p3 tools and look to see where, if any aux events are defined. If they're all blank, I would send it back. Alternatively, you could feed the midi into a pc based sequencer to see by how much these lengths
2008-05-05 by sean_zoega
Thanks for the advice. I am just in the process of installing P3 tools. I did however record the sequence into Cubase. I then played it back and everything is fine...which would of course point to the problem being Cubase and not the P3. I havent the slightest idea what Cubase co
2008-05-05 by sean_zoega
I have initialised the whole machine F1+STEP 7 when powering machine on. I did this after the initial random gate length problems but it hasnt changed anything. As I havent got as far as Aux events I get the feeling this unit might have to go back to Colin again for repair. I hav
2008-05-05 by sean_zoega
I have initialised the whole machine F1+STEP 7 when powering machine on. I did this after the initial random gate length problems but it hasnt changed anything. As I havent got as far as Aux events I get the feeling this unit might have to go back to Colin again for repair. Thank
2008-05-05 by sean_zoega
I did buy it second hand and it is just back from Colin who kindly fitted a new screen for me. I have initialised the whole machine F1+STEP 7 when powering machine on. I did this after the initial random gate length problems but it hasnt changed anything. As I havent got as far a
2008-05-05 by DB
Zed, Hopefully, the P4 will take what the P3 has done with Chords and runs with it :) Until then, we have what we have, which isn't too bad compared to most Step Sequencers. Are you aware that Colin's created a "Quick Config" for Aux Chord Mode. Here's the steps. 1. In Pattern Ed
2008-05-05 by Hans Greuber
nice! What about minimal house? I need it Colin! Hans ________________________________ > To: analogue-sequencer@yahoogroups.com > From: zedhok@yahoo.com > Date: Mon, 5 May 2008 08:03:49 -0700 > Subject: [analogue-sequencer] Chords on P3 > > > Hi, > It is complicated to program ch
2008-05-05 by josh
Or it's playing more than 1 bar in a row, and the bar you are editing only loops around every so often? On Mon, May 5, 2008 at 10:27 AM, Softroom wrote: > sean_zoega wrote: > > I've just started to try and learn the operation of the p3. > > Unfortunately I have got stuck pretty e
2008-05-05 by Softroom
Zed Velkovich wrote: > Chords are important. Agreed - but they are also pretty rare in the world of step sequencers so having them at all is nice. I'd like step mode input of them too BTW, but not sure there's too much space left in P3. Personally, since there's only one of him,
2008-05-05 by Softroom
sean_zoega wrote: > I've just started to try and learn the operation of the p3. > Unfortunately I have got stuck pretty early on. When I create a simple > pattern the gate lengths seem to be random i.e. they change from one > repeat of the pattern to the next. I've been through t
2008-05-05 by eric f
Did you buy it second hand? If so, initialize the bank in question as the previous owner's data may be in the patterns. cheers, eric f sean_zoega wrote: I've just started to try and learn the operation of the p3. Unfortunately I have got stuck pretty early on. When I create a sim
2008-05-05 by Zed Velkovich
Hi, It is complicated to program chords on P3 with 3 auxes spend. Why not set Xd button to enter in chord mode and to get a chord just with one button selected like gate or tie. Upper row can be used to select a type of the chord. Chords are important. Regards, Zed. _____________
2008-05-05 by sean_zoega
I've just started to try and learn the operation of the p3. Unfortunately I have got stuck pretty early on. When I create a simple pattern the gate lengths seem to be random i.e. they change from one repeat of the pattern to the next. I've been through the manual but so far...no
2008-05-04 by Hans Greuber
Dear C3P0; They are NOT implemented that I know in V4,pñease don´t fool me! Hans > > Hi Paul > > I don´t have the P3 at hand, could you tell me please, I mean in V4 > > Thanks! > > What oher goodies have been implemented yet? > ________________________________ >> To: analogue-seq
2008-05-04 by Hans Greuber
Hi Paul I don´t have the P3 at hand, could you tell me please, I mean in V4 Thanks! What oher goodies have been implemented yet? ________________________________ > To: analogue-sequencer@yahoogroups.com > From: softroom@btinternet.com > Date: Sun, 4 May 2008 07:19:07 +0100 > Subj
2008-05-04 by otison
--- In analogue-sequencer@yahoogroups.com, "otison" wrote: > > hi list, > > I've had trouble today trying to (finally) upgrade to v4 > I'm using MidiOX to send the firmware v4 Sysex as downloaded from > Sequentix website today: > - I fire up in Firmware check mode (Func+Page) > -
2008-05-04 by otison
hi list, I've had trouble today trying to (finally) upgrade to v4 I'm using MidiOX to send the firmware v4 Sysex as downloaded from Sequentix website today: - I fire up in Firmware check mode (Func+Page) - then I arrive to the " Boot / Flash " option page as said in the manual -
2008-05-04 by Ditton33
OK RTFM. :-) F1 & key 7 while switching on. Thanks. > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com > >[mailto:analogue-sequencer@yahoogroups.com] On Behalf Of Ditton33 > >Sent: 04 May 2008 08:46 > >To: analogue-sequencer@yahoogroups.com > >Subject: [ana
2008-05-04 by Ditton33
Hi all Since changing the number of banks I keep finding bits of things here and there. Is there any way of reseting everything ie clearing everything out so I can start afresh? Thanks. [Non-text portions of this message have been removed]
2008-05-04 by Softroom
Hans Greuber wrote: > Hi list; > > I haven´t turned on my sequencer since a couple of months ago. > > What have been implemented yet? > > nudge and chord step enter mode have been implemented? Maybe you should turn it on and see if the elves magically added something? Remember th
2008-05-04 by Hans Greuber
Hi list; I haven´t turned on my sequencer since a couple of months ago. What have been implemented yet? nudge and chord step enter mode have been implemented? Thanks _________________________________________________________________ MSN Video. http://video.msn.com/?mkt=es-es
2008-05-03 by Colin Fraser
> I'm working on a tune with my P3 (v4) as the main sequencer. > I would like to know if there is > a higher Timebase than 1, for example x2 or x3 or x4 ? > Up-to-now there are only 1, 2, 4, 8, > 16, 32, 64, 64T, 32T, 16T, 8T, 4T, 2T timebases. Many thanks! There is no higher tim