Yahoo Groups archive
Messages
Page 36 of 168 · 8362 messages matched
2008-05-31 by Colin Fraser
> is there a way to copy a whole track/pattern from one bank into > another bank (V4)? Not inside P3. You can copy a bar of a pattern in edit mode, and paste it into a new pattern after changing bank, but there isn't an easy way to save a multi-bar pattern to a different bank due
2008-05-31 by Ivan
I have to give credit where it is due. Steve took all the photos and built the kit. He does a fantastic job and is very particular which is why I entrusted this kit (and future projects, I'm sure) to him. Ivan --- In analogue-sequencer@yahoogroups.com, "Ryan Dean" wrote: > > Grea
2008-05-31 by Mark Pulver
He built a jig - you can see it the pics of mine, and then the pics of his own P3. Mark -------- Ryan Dean (01:00 PM 5/31/2008) wrote: >Yeah, the build quality looks exceptional. Still trying to figure out how he >managed to precisely align the keypad. > > >On Sat, May 31, 2008 a
2008-05-31 by Ryan Dean
Yeah, the build quality looks exceptional. Still trying to figure out how he managed to precisely align the keypad. On Sat, May 31, 2008 at 12:57 PM, Mark Pulver wrote: > > Yeah, it should be pointed out that outside of being a great photographer, > Steve is a fantastic builder.
2008-05-31 by Mark Pulver
Yeah, it should be pointed out that outside of being a great photographer, Steve is a fantastic builder. He built up both mine and Ivan's P3's. HIGHLY recommended: http://nuxx.net/gallery/v/stuffivemade/ Steve Vigneau Mark ------ Ryan Dean (12:43 PM 5/31/2008) wrote: >Great photo
2008-05-31 by Ryan Dean
Great photography in that gallery. Thanks for sharing Ivan. On Sat, May 31, 2008 at 11:59 AM, Ivan wrote: > Thanks for the suggestions! Looks like I've got some reading and > twiddling to do. > > For a picture of my sexy new P3 check out this link: > > > http://nuxx.net/gallery/v
2008-05-31 by Steve
Thank you. I have a photo of the jig used for the step board here (http://nuxx.net/gallery/v/stuffivemade/sequentix_p3_for_ivan/IMG_1144.jpg.html), but I just realized that I don't actually have one of the keypad. It's been a little while since I did it, but if I remember correct
2008-05-31 by Ivan
Thanks for the suggestions! Looks like I've got some reading and twiddling to do. For a picture of my sexy new P3 check out this link: http://nuxx.net/gallery/v/stuffivemade/sequentix_p3_for_ivan/IMG_1388.jpg.html Ivan
2008-05-31 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, "Ivan" wrote: > It's got v4 loaded. So where do I begin? What documentation do I > need to read to get going? Congrats getting your P3 up and running! I agree the manual is required reading and Paul Nagle's user guide. Though both were w
2008-05-31 by sean_zoega
--- In analogue-sequencer@yahoogroups.com, "Ivan" wrote: > > It's Alive! My P3 is now a living breathing sequencer thanks to Steve > V and his diligent work. And to Colin for helping diagnose a few issues. > > It's got v4 loaded. So where do I begin? What documentation do I > nee
2008-05-31 by eigentone2000
hi group is there a way to copy a whole track/pattern from one bank into another bank (V4)? best regards peps
2008-05-31 by Ivan
It's Alive! My P3 is now a living breathing sequencer thanks to Steve V and his diligent work. And to Colin for helping diagnose a few issues. It's got v4 loaded. So where do I begin? What documentation do I need to read to get going? Thanks in advance! Ivan
2008-05-29 by acidmitch
> > Has anyone tried to run CUBASE VST to sync with the P3? I still have nightmares about Cubase VST running on Windows 98.(shudder) It had the worst Midi timing I can remember having.
2008-05-29 by Steven Clements
I used to use my Atari 1040 ST to sync to MTC and SMPTE code and it worked flawlessly. Should have kept the system, but I got rid of it when the PC's began to look more appealing. Has anyone tried to run CUBASE VST to sync with the P3? Even though the version of Cubase is not as
2008-05-27 by p evans
Feel obliged to add my 2 pence here which is that software manufacturers and as has been said probably most computer users are loving the DAW, and one way to make that more of a strangle hold on the music industry is of course to program out any option other than computer as mast
2008-05-26 by Zahir Manek
awesome, thanks. i'll try it tonight. Sean Zoega wrote: Thanks for the help and after a day of playing about with Cubase I might have found a way to get Cubase to listen to each P3 MIDI output on seperate tracks If you set up the MIDI port as Sequentix and then in the track you'l
2008-05-26 by Sean Zoega
Gene, thanks for your help...I managed to find it earlier after a certain amount of swearing but many thanks all the same. Cheers sean Gene Schwartz wrote: > > yeah - there are per track input transformers that make it easy. There > are even presets built in for channel filtering
2008-05-26 by Sean Zoega
Thanks for the help and after a day of playing about with Cubase I might have found a way to get Cubase to listen to each P3 MIDI output on seperate tracks If you set up the MIDI port as Sequentix and then in the track you'll see a "square wave" with an arrow on it, click this an
2008-05-26 by Gene Schwartz
yeah - there are per track input transformers that make it easy. There are even presets built in for channel filtering. As far as routing multiple sequencers from various midi ports out to different synths, Cubase makes it rather easy, actually. Logic, for instance, makes it very
2008-05-26 by Julian
>>i'm not sure what syncing ableton to the p3 gets you above and beyond what i've described here. am i missing something? most people dont mind staring into the computer screen and navigating with the low-bandwidth x-y pointer device, but there seems to be a few of us who would l
2008-05-26 by Zahir Manek
i think the reason that cubase no longer slaves to external clocks is that it messes up their sample accurate recording or something like that. the way i use the p3 with cubase is as follows: i send the midi out from cubase through my soundcard and then to the P3 then to my synth
2008-05-26 by sean_zoega
Thanks for the advice with syncing...which basically seems to boil down to "dont buy cubase" and if you do then cubase has to act as the master. I must admit I'm regretting Cubase now...its a total nightmare to setup (unless you have the mentality of a german programmer!). As I'v
2008-05-25 by Softroom
dab wrote: > ah cubase got rid of midi clock sync slave as well as logic ? > i wonder whats the reason for this. Audio rules in these programs now - probably how most users like it. And you can't do stable audio sync to MIDI clock, although I seemed to manage fine on earlier vers
2008-05-25 by dab
ah cubase got rid of midi clock sync slave as well as logic ? i wonder whats the reason for this. in older cubase versions this was possible. before you set your computer to master i would really recomend you another software (like ableton) sean_zoega schrieb: > > I was after som
2008-05-25 by boops.secretvibes
hi,impossible to have mtc with the P3...i know live 6 by example,has a midi clock...good luck..
2008-05-25 by sean_zoega
I was after some advice as to how best sync up my P3 and cubase (SX4). Cubase wont accept MIDI clock as a sync source and I dont know if the P3 will output MTC. I wanted to have the P3 as the master as its got a tempo knob (so much better than a mouse for setting tempo) all advic
2008-05-24 by xlatemx@gmx.net
------S O L D------- best regards martin ------- Original-Nachricht -------- Datum: Sat, 24 May 2008 10:01:11 +0200 Von: xlatemx@gmx.net An: analogue-sequencer@yahoogroups.com Betreff: P3 for sale Hi! First sorry for my bad english, it´s not so good, how it should :) I bought a P
2008-05-24 by xlatemx@gmx.net
Hi! First sorry for my bad english, it´s not so good, how it should :) I bought a P3 for a few months from a very nice guy;called v.H... But now I´ve got a midibox sequencer and don´t need the p3 too. The P3 is in mint condition and I replaced the dickey PLED with a new LCD-Displ
2008-05-23 by Softroom
watson wrote: > prodyssey sounds pretty damn good man, great job. Thanks, it is a darn cool synth. -- Paul --- "Effectus super absolutionem" http://www.JointIntelligenceCommittee.com http://www.myspace.com/jointintelligencecommittee
2008-05-23 by watson
prodyssey sounds pretty damn good man, great job. On Fri, May 23, 2008 at 4:17 AM, Softroom wrote: > watson wrote: > > me likey, what synths were used? > > Creamware Prodyssey (through my new Metasonix filter pedal), Monowave, > Bass Station, SH-101 with percussion etc. from an E
2008-05-23 by Softroom
watson wrote: > me likey, what synths were used? Creamware Prodyssey (through my new Metasonix filter pedal), Monowave, Bass Station, SH-101 with percussion etc. from an Emu Proteus 2500. And the usual gratuitous delay.. :) -- Paul --- "Effectus super absolutionem" http://www.Joi
2008-05-22 by watson
me likey, what synths were used? On Thu, May 22, 2008 at 3:29 PM, Softroom wrote: > Some trippy madness using different Gbars per part. Mindbendingly > freakyyyyy unless you give in to it. > > www.bogusfocus.com/mp3/P3GbarMania.mp3 > > Have fun grooooovin! Embrace The Chaos! > >
2008-05-22 by Softroom
Some trippy madness using different Gbars per part. Mindbendingly freakyyyyy unless you give in to it. www.bogusfocus.com/mp3/P3GbarMania.mp3 Have fun grooooovin! Embrace The Chaos! -- Paul --- "Effectus super absolutionem" http://www.JointIntelligenceCommittee.com http://www.mys
2008-05-16 by Doug Wellington
> the one here http://www.sequentix.com/build/old/pdf/p3-bom.pdf > is 'in price' (I know this sounds stupid. but for me it was the > easyest way to compare) a little bit different from the one 'here' in > the files/archive section. Prices are very hard to compare. Parts change a
2008-05-16 by Hans Greuber
When I just heard to this song and this movie and all Carpenter's ones I didn´t know what a Moog or Arp was either I was amazed by negro voices, I saw this movie back on ´86 or so. Thriller also had a similar sound on bass. I was shocked and then I realized on electronic music Da
2008-05-16 by Hans Greuber
When I just heard to this song and this movie and all Carpenter's ones I didn´t know what a Moog or Arp was either I was amazed by negro voices, I saw this movie back on ´86 or so. Thriller also had a similar sound on bass. I was shocked and then I realized on electronic music Da
2008-05-15 by Colin Fraser
> > so where can I find the 1.4 pcb 'bill of materials? > > I'm not sure exactly which version this is (1.3?), but > hopefully it will give you a good start: > > http://www.sequentix.com/build/old/pdf/p3-bom.pdf That is the v1.4 BoM. The v1.4 schematics are also on the page http:
2008-05-15 by gemindrie
Thanks! also because you are still involved! the one here http://www.sequentix.com/build/old/pdf/p3-bom.pdf is 'in price' (I know this sounds stupid. but for me it was the easyest way to compare) a little bit different from the one 'here' in the files/archive section. regards jus
2008-05-15 by Doug Wellington
> so where can I find the 1.4 pcb 'bill of materials? I'm not sure exactly which version this is (1.3?), but hopefully it will give you a good start: http://www.sequentix.com/build/old/pdf/p3-bom.pdf After a quick scan of the pictures near that link, it looks like there's capacit
2008-05-14 by gemindrie
thanks! all of You! I found the BOM here in the files. should I not include upgrades made later(is this possible) and ask who? I am a big noob with electronics, and hopefully a friend of me, is going to help me. But I first want to collect all the components. --- In analogue-sequ
2008-05-14 by oops oops
Probably the v1.4 when dealing with chip 044 Regards, -Frank To: analogue-sequencer@yahoogroups.comFrom: gemindrie@yahoo.comDate: Wed, 14 May 2008 12:28:25 +0000Subject: [analogue-sequencer] P3 building kit HelloI have a old P3 building kit wich I want to complete now.It has zeve
2008-05-14 by boops.secretvibes
hi it's a 1.4 version cause i have the 061 and it's a 1.4 pcb version...i am building it in this moment too..if you are some questions...ask them..best regards Boop's In analogue-sequencer@yahoogroups.com, Doug Wellington wrote: > > > I have a old P3 building kit wich I want to c
2008-05-14 by Doug Wellington
> I have a old P3 building kit wich I want to complete now. > It has zeven prints, some knobs, and the P3-044 chip. > I also own the case. > > My question is, > with wich 'bill of materials'should I complete this machine, > the 1.6 or the v1.5 Probably the 1.5. What version numbe
2008-05-14 by gemindrie
Hello I have a old P3 building kit wich I want to complete now. It has zeven prints, some knobs, and the P3-044 chip. I also own the case. My question is, with wich 'bill of materials'should I complete this machine, the 1.6 or the v1.5 cheers just
2008-05-13 by Hans Greuber
Hi list; What features you don´t use on the P3? Just to know whic ones could be sacrificed in order to achieve more space for chords,per example. I never used playlist and some " advance" features for composing " tracks" or " songs".. but half a bar 6 sequences at the time trigge
2008-05-11 by Hans Greuber
Yes, user definable chords is the way not preset ones. How difficult would be to implement this way? You press the " chord comb/button" on the P3 then you press the chord on the keyboard and voila!! That in step mode recording Hans ________________________________ > To: analogue-
2008-05-10 by James R. Coplin
Wouldn’t it be even more efficient just use each bit for a chord type? Major, minor, augmented, diminished, etc. with some 4th, sixth, and sevenths, thrown in and just use the note value as the root? If you wanted to get fancy one of the other auxs could set the voicing/inversion
2008-05-10 by Colin Fraser
> if it's possible to have an aux event that works in tandem with the > FTS settings to produce /on a single aux/ a choice of minor & major > triads, then this- along with the other aux(es) set to play aux notes > as usual, ought to take care of most requirements. probably plenty
2008-05-10 by Hans Greuber
Sure I mean three notes chord as maximun, other was for ambient soundscapes.! > >> ---------------------------------------- >>> From: turbotron69@... > >>> I agree, I just need two or 3 user definable chords, that´s > minimal house. > > Your house isn't quite minimal if your usin
2008-05-10 by duncan
I've used chords a lot on my P3s- I may have been one of the first to ask for these particular aux events, & was certainly one of the first to ask for them to be live-recordable. so- I have a couple of ideas. if it's possible to have an aux event that works in tandem with the FTS