Yahoo Groups archive
Messages
Page 38 of 168 · 8362 messages matched
2008-05-03 by hpsounds_fr
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > I'm working on a tune with my P3 (v4) as the main sequencer. > > I would like to know if there is > > a higher Timebase than 1, for example x2 or x3 or x4 ? > > Up-to-now there are only 1, 2, 4, 8, > > 16, 3
2008-05-03 by hpsounds_fr
I'm working on a tune with my P3 (v4) as the main sequencer. I would like to know if there is a higher Timebase than 1, for example x2 or x3 or x4 ? Up-to-now there are only 1, 2, 4, 8, 16, 32, 64, 64T, 32T, 16T, 8T, 4T, 2T timebases. Many thanks! Best regrads, Hedi K.
2008-05-02 by Nick Rothwell
On 1 May 2008, at 21:56, Colin Fraser wrote: > The conversion is for a new workshop/studio for me, so improved > service can > resume once I'm in ! P4! -- N. Nick Rothwell / Cassiel.com Limited www.cassiel.com www.myspace.com/cassieldotcom www.last.fm/music/cassiel www.reverbnati
2008-05-01 by Colin Fraser
> anyway. bottom line is, I guess I'll be needing a couple of the LCD > kits soon too. colin, how does one go about this? I'd be much happier > about our imminent US trip (mid-june) if I have this fixed first. I should have had an order page for those kits up by now... We're gett
2008-05-01 by Colin Fraser
> Hi everybody,in my version 1.4 kit i' ve soldered the capa c12 near > ic3 sram ..is it useful?cause i dont see it in the picture of the 1.4 > kit building...best regards Phil It's a decoupling cap for the RAM chips. I left them out as I wasn't sure what level of leakage they mi
2008-05-01 by boops.secretvibes
Hi everybody,in my version 1.4 kit i' ve soldered the capa c12 near ic3 sram ..is it useful?cause i dont see it in the picture of the 1.4 kit building...best regards Phil
2008-04-30 by Colin Fraser
Hi Zed, > I replaced my new LCD sucsefully, P3 works LCD is on but no > numbers on it. I guess it have to ajust contrast but dont > know where it is. > > If anybody can help me please. The contrast control is the trimmer VR1 just next to R19. You know where R19 is. A good startin
2008-04-30 by Zed Velkovich
Hi, I replaced my new LCD sucsefully, P3 works LCD is on but no numbers on it. I guess it have to ajust contrast but dont know where it is. If anybody can help me please. Thanks, Zed. ____________________________________________________________________________________ Be a better
2008-04-30 by magnetize
For Sale, pre-production P3. This is one of the units pre-assembled by Colin. Four years old, never left my studio, PWO (LCD Screen is 100%) & cosmetically excellent. http://www.iolfree.ie/~blingbling/p3-1.jpg http://www.iolfree.ie/~blingbling/p3-2.jpg In located in Ireland but c
2008-04-29 by Colin Fraser
> Received today my LCD but don't know where to solder > resistor, what is R19??? Completely confusing.. Look at this picture... http://www.sequentix.com/build/cnst-main-img.htm You'll find a space for R19 just below the trimmer VR1, in the top right corner of the board, next to
2008-04-29 by Zed Velkovich
Received today my LCD but don't know where to solder resistor, what is R19??? Completely confusing.. Please help, where can I see resistor soldered? Thanks, Zed. ____________________________________________________________________________________ Be a better friend, newshound, an
2008-04-28 by Jim Combs
[Yes, a P3 is heard on the following...] If you want to hear a musical preview of this weekend's City Skies 08 Electronic Music Festival, with pithy interviews with Festival organizer Jim "Sensitive Chaos" Combs, and performers Klimchak and Kevin "Burning Artist(s) Sale" Haller,
2008-04-27 by duncan
>>I'm thinking the issue is also related to general age of the modules, not just power-on time.
2008-04-26 by Colin Fraser
> I appreciate Paul's help, but can anyone else advise. To > review (with a correction): > =Track 3 is muted > =Track 1 has Aux B = Unmute track 3. Enabled on step 1. > =Track 1 has Aux C = offset Dacc rel = +1. Enabled on step 1. > =Track 1, Aux D has Mask xB, Dacc >= n. n=12. E
2008-04-26 by eric f
Cool, thanks! I'm using V3 still... one of these days I'll move up to V4 (and install my memory expansion). So, as you might imagine, I'm conserving the patterns on my track... there are other ways to go about it, sure, but I'm also trying to get my head around combining the D ac
2008-04-26 by Softroom
ach_gott wrote: > So I've figured out how to configure an Aux event (on Aux B) to unmute > a track which I'm pretty sure I already knew how to do. I'd like to > unmute the track after pattern 1, track 1, plays 12 times. Using V4 (not sure if you are?), the absolute easiest way to
2008-04-26 by ach_gott
I've owned my P3 for about 18 months now, but am only starting to get into the D accumulator. The song I'm working on right now has me skipping across cables to mute tracks, falling on delays, splitting my skull to switch parts... for a fairly simple tune. So I've figured out how
2008-04-23 by hpsounds_fr
Hello, I've got some Doepfer stuffs (G6 rack, several modules and patchords) for sale, shipping only in France and European Union. Here is the link to the post on my website: http://www.hpsounds.com/2008/04/23/a-vendre-for-sale/ Contact me via the CONTACT page on my website : htt
2008-04-23 by Ivan
--- In analogue-sequencer@yahoogroups.com, "Steve" wrote: > > As a follow-up to this and the other PLED posts today, I gave a brand > new, still in the pink bubble wrap and with the protective coating > PLED a go in Ivan's P3 and it is just simply blank. The P3 sees it > because
2008-04-23 by Steve
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > Fading is normal - each pixel has lifetime that reduces while it is turned > on. > According to the datasheet - "The Half-Brightness Decay life will longer > than 10k hours in room temp." > Experience suggests thi
2008-04-22 by Colin Fraser
> Mine is starting to fade a little bit on the left, like that > 1st picture > Steve posted, > but I haven't had the problem with the 2nd line missing (yet!) Fading is normal - each pixel has lifetime that reduces while it is turned on. According to the datasheet - "The Half-Brig
2008-04-22 by Colin Fraser
Hi Steve, > 1) I believe that the PLED I have is failing. This display will > occasionally display nothing without a power cycling, usually doesn't > display a second row, seems to have fading at the edges of the > display, and the pixels seem smaller than usual. Can any of you >
2008-04-22 by josh
Mine is starting to fade a little bit on the left, like that 1st picture Steve posted, but I haven't had the problem with the 2nd line missing (yet!) On Tue, Apr 22, 2008 at 3:44 PM, Nick Rothwell wrote: > Hmm ... the PLED on my P3 failed a month or so ago; what happened is > tha
2008-04-22 by Nick Rothwell
Hmm ... the PLED on my P3 failed a month or so ago; what happened is that individual pixels in the characters faded out and died - those which were on more often than the others - and then over the course of a couple of days the entire display went dark, as if all the remaining p
2008-04-22 by Steve
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > Is that a new part, or one that's been sitting for a while but hasn't been > used ? Best I can tell it's a part that has been sitting for a while. This P3 is actually for an individual from these forums and it's b
2008-04-22 by Steve
Hey everyone... I'm working on building a P3 for a member of this group using the v1.5 board set. Everything is going good thus far, but I have two questions I'm hoping others here can help me with. 1) I believe that the PLED I have is failing. This display will occasionally disp
2008-04-22 by hysham2000
with the link : http://www.genoqs.com/index.php? option=com_content&task=view&id=42&Itemid=117 --- In analogue-sequencer@yahoogroups.com, "hysham2000" wrote: > > Hello, > > As you certainly know the GenoQ nemo will be released in July (price > 1400 euros), can someone help me to
2008-04-22 by hysham2000
Hello, As you certainly know the GenoQ nemo will be released in July (price 1400 euros), can someone help me to differientiate the functionalities from the P3 and this nemo ? What are, in your opinion, the main differences (pros/cons), what about customer experience (not with the
2008-04-21 by Colin Fraser
> hi colin...my search gave me an important information...on the 1.6 > version bill...(at this time i 've taken my information on the 1.4 > version bill cause my pcb 061) i found 4.7 k linear pot ;can i use it > in my version? You can use either value or pot. 4k7 pots will draw a
2008-04-21 by Nick Rothwell
I'm doing a gig in Bath on Wednesday - details at http://www.mediaartbath.org.uk/ . The P3 will be present, selbstverständlich. -- N. Nick Rothwell / Cassiel.com Limited www.cassiel.com www.myspace.com/cassieldotcom www.last.fm/music/cassiel www.reverbnation.com/cassiel www.linke
2008-04-21 by boops.secretvibes
hi colin...i forget!! for the led spacer which reference? i found for 5mm led four lengths 3; 7.6; 12.7; 19...after 3 years..the code have changed...thanks .can i cut them..i don't know this component yet..cheers.. - In analogue-sequencer@yahoogroups.com, "boops.secretvibes" wrot
2008-04-21 by boops.secretvibes
hi colin...my search gave me an important information...on the 1.6 version bill...(at this time i 've taken my information on the 1.4 version bill cause my pcb 061) i found 4.7 k linear pot ;can i use it in my version?could i make the update 3.8 with?can i take 4.7 for step and 1
2008-04-20 by josh
Looks like I might be ordering 1 as well... Collin will you please let us know on the list when you have that area up for orders? Thank you! josh heckadecimal On Sun, Apr 20, 2008 at 10:33 AM, david wrote: > Thanks Colin for the reply. > I've seen the screensaver function in the
2008-04-20 by david
Thanks Colin for the reply. I've seen the screensaver function in the last beta, but maybe it was too late: indeed seems i have left my P3 turned on for too many hours, i really didn't know that, otherwise i'd payed more attention. Btw i'll order a new LCD as soon as you make the
2008-04-20 by boops.secretvibes
hi everybody,i am building the sequentix p3 number 61(perhaps the last)...after different researchs my last steps are: 1-Buttons and tactile switches 2-case desktop style if possible 3-countersunk screw and spacers ...i am look for the famous cherry switches!!!....for the moment
2008-04-19 by Colin Fraser
The PLED displays do wear out over time, though the 'half-life' was supposed to be 10,000 hours. In practice it seems to be less than that. If your display is fading, it doesn't mean that it is going to fail completely. The worst affected displays are obviously those that have be
2008-04-17 by david
Hi, thanks for the reply. My P3 is a ready built unit, with serial 1008 and I don't know what kind of LCD has it. It's darker in the lower part, like there's a sort of shadow. I can still work with it, but i'm worried that it could be turn off definitely one day. 2008/4/17, digit
2008-04-17 by david
Hi! I think my LCD has some problems. It's going everyday darker: when i turn it on i can't see all the characters, and only after 5-10 minutes it becomes a little brighter. What could it be? It's an hardware problem or do you suggest to reinstall the software? Thanks for any hel
2008-04-17 by digitana2002
Hi ..OLED/PLED displays have a black background and lighter characters (like the one shown on the homepage of this site). Backlit LCD screens have bright background (yellow, green or blue usually). Sounds like yours is OLED/PLED. I have heard these have reliability issues? Anyway
2008-04-17 by digitana2002
Hi ..is this a genuine backlit lcd or one of the newer oled/pled versions? If its a regular backlit lcd sounds like the contrast control voltage may be intermittant or the lcd is genuinely on its way out. The contrast control coltage is just a taken from the +5V supply and is con
2008-04-17 by digitana2002
Hi all..I have a P3 for sale. See photos in 'P3 by Morbius' photo album. The machine has just been completed by myself and has ver 3.8 firmware, blue backlit lcd screen (so more reliable its seesm than oled/pled versions), red anodized cnc machined top panel, oiled iroko side che
2008-04-16 by boops.secretvibes
thanks...kinds regards...boop's - In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > > > > -hi Colin,after loading the shaeffer software..it seems that my 061 > > version 1.4 pcb pad key is good...i have a little doubt(1or2 > > millimetre)...when you change these key
2008-04-16 by josh
A pic from 1 of my favorite shows, The IT Crowd: http://geektechnique.org/images/798t.jpg It's a little hard to see, but his shirt has a picture of Mao holding up his little red book and it says: "RTFM" ;-D funny thing tho, I'm always preaching the RTFM gospel, but I never tried
2008-04-16 by Mark Pulver
Nick Rothwell (09:34 AM 4/16/2008) wrote: >On 16 Apr 2008, at 16:03, Mark Pulver wrote: >> Arpeggiator? > >Not finished the manual yet, huh? :) ummm... :)
2008-04-16 by Softroom
Mark Pulver wrote: > Dude, I've known you long enough that I expected that! I know. I mean, I went into a music store the other day and this guy sidled up and said "can I help you?". "I dunno," I replied, "are you a psychiatrist?". You know how it is... > Arpeggiator? Whenever I
2008-04-16 by Nick Rothwell
On 16 Apr 2008, at 16:03, Mark Pulver wrote: > Arpeggiator? Not finished the manual yet, huh? -- N. Nick Rothwell / Cassiel.com Limited www.cassiel.com www.myspace.com/cassieldotcom www.last.fm/music/cassiel www.reverbnation.com/cassiel www.linkedin.com/in/cassiel www.loadbang.ne
2008-04-16 by Mark Pulver
Paul Nagle (07:54 AM 4/16/2008) wrote: >--- Mark Pulver wrote: >> HAHAHH!!! > >Sorry, that sorta dumb flippant day... Dude, I've known you long enough that I expected that! >> Okay, so... the sequence is running, but the display >> is locked to show the stage info, and you can st
2008-04-16 by Paul Nagle
--- Mark Pulver wrote: > HAHAHH!!! Sorry, that sorta dumb flippant day... > Okay, so... the sequence is running, but the display > is locked to show the > stage info, and you can step through the stages > editing as you go. Aha > That better? :) Hehe, still sounds like you're int
2008-04-16 by Mark Pulver
Paul Nagle (11:47 PM 4/15/2008) wrote: >--- Mark Pulver wrote: > >> So, you'd stop the sequence, go to EDIT, then single-step >> through a sequence. > >"Stop the sequence"? Stop? Like, not have it running? A total absence >of patterns playing? I'm having difficulty understanding
2008-04-16 by Colin Fraser
> -hi Colin,after loading the shaeffer software..it seems that my 061 > version 1.4 pcb pad key is good...i have a little doubt(1or2 > millimetre)...when you change these key holes,do you move a lot?or > just a few millimetres? best regards The holes were moved maybe 2mm each awa