Yahoo Groups archive
Messages
Page 39 of 168 · 8362 messages matched
2008-04-16 by boops.secretvibes
-hi Colin,after loading the shaeffer software..it seems that my 061 version 1.4 pcb pad key is good...i have a little doubt(1or2 millimetre)...when you change these key holes,do you move a lot?or just a few millimetres? best regards -- In analogue-sequencer@yahoogroups.com, "Coli
2008-04-16 by Paul Nagle
--- Mark Pulver wrote: > So, you'd stop the sequence, go to > EDIT, then single-step > through a sequence. "Stop the sequence"? Stop? Like, not have it running? A total absence of patterns playing? I'm having difficulty understanding the concept... stop the sequence... stop it? N
2008-04-15 by Mark Pulver
So now that I'm an old pro with a screaming 2 hours under my belt, I have some questions. :) - Is there a display mode that will let me see the stage values (note, gate time, length) that isn't timed? Right now you're shown the values for ~2 seconds then the display clears. - Kin
2008-04-15 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, Mark Pulver wrote: > > > ...and NOW I know what Sir Nagle's been crowing about for YEARS! Smoking again are we?^) -Jim
2008-04-15 by Mark Pulver
HAHAHAH! ------ Nick Rothwell (10:21 AM 4/15/2008) wrote: > >On 15 Apr 2008, at 16:53, Mark Pulver wrote: >> Holy Crap Colin, this thing is DEEEEEEEEEP! > >Well, that's case design for you. My P3 isn't very deep, but it's >rather WIIIIIIIIDE.
2008-04-15 by Nick Rothwell
On 15 Apr 2008, at 16:53, Mark Pulver wrote: > Holy Crap Colin, this thing is DEEEEEEEEEP! Well, that's case design for you. My P3 isn't very deep, but it's rather WIIIIIIIIDE. -- N. Nick Rothwell / Cassiel.com Limited www.cassiel.com www.myspace.com/cassieldotcom www.last.fm/mus
2008-04-15 by Mark Pulver
...and NOW I know what Sir Nagle's been crowing about for YEARS! Holy Crap Colin, this thing is DEEEEEEEEEP! Thanks again to SteveV for building this up... WOW! IVAN! YOU'RE ON DECK DUDE! ref: http://nuxx.net/gallery/v/stuffivemade/sequentix_p3_for_mark_pulver/ http://nuxx.net/bl
2008-04-12 by Jim Combs
There will be at least one, and maybe two, P3s in operation at City Skies 08 Electronic Music Festival, May 2 & 3, 2008 in Decatur, GA The response has been fantastic for our festival and we're about half full for each of the three shows. With only three weeks left before the fes
2008-04-09 by Colin Fraser
> Hi everybody here,is it possible to find and where the file (for a > schaeffer) built for this front panel : > http://www.sequentix.com/gallery/p3-069.jpg I've uploaded the file for that panel to the Yahoo Group files section, in the DIY folder. Pay careful attention to the REA
2008-04-08 by boops.secretvibes
Hi everybody here,is it possible to find and where the file (for a schaeffer) built for this front panel : http://www.sequentix.com/gallery/p3-069.jpg and the case for this front panel...do i need to buy the previous memory if i am waiting for a new extension memory?thanks very m
2008-04-08 by Andy Wilson
And here's #007 http://www.techman.synth.net/techman_website2_000033.htm I built this in 2003 and it's still going strong, except for a slightly dodgy PLED. It now has a memx board, but my solution to the tight fit was to rotate the main board round by 180 deg to give more headro
2008-04-06 by Gert van Santen
analogue-sequencer@yahoogroups.com schreef: > There were also a couple of other variations, such as Gert's Big One... > http://www.sequentix.com/gallery/gbo.jpg > It's still working nicely :-) -- :-) G e r t v a n S a n t e n - - - - - - - - - - - - - - - - - - www.gertvansanten.
2008-04-06 by Steve
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > That case is the 'Maddox layout'. Wow. I hadn't realized there were so many implementations... Thanks for clearing that up. I'll change my documentation to reflect that. -Steve
2008-04-06 by machinebrother
Hello everyone! I have just listed my P3 for sale. You can see the auction at http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=140222265545. The unit is in perfect condition, hardly used. I prefer to ship to EU, but may consider shipping overseas. Happy bidding and greetings
2008-04-05 by Softroom
Colin Fraser wrote: > Is this what they mean by a 'case history' ? Groan.... -- Paul --- "Effectus super absolutionem" http://www.JointIntelligenceCommittee.com http://www.myspace.com/jointintelligencecommittee
2008-04-05 by Colin Fraser
> Hey everyone... I just finished up building an original > (preproduction?) case P3 for one of the members of this group, That case is the 'Maddox layout'. The 'original' P3 case was a black desktop case sold by Maplin. Only four P3s were produced by myself in that case, such as
2008-04-05 by Mark Pulver
WOOOOHOOOOOOOOOOOOO!!!!! That's me! Folks, if any of you are sitting on a kit (mine had been sitting for YEARS) I can't say enough good things about working with Steve. Steve introduced himself to IvanCU and I after Ivan had put out a call looking for someone who wanted to assemb
2008-04-05 by Jesse
Great job Steve! Man I want a propoduction case! ----- Original Message ----- From: Steve To: analogue-sequencer@yahoogroups.com Sent: Saturday, April 05, 2008 12:01 PM Subject: [analogue-sequencer] Sequentix P3 #008 Is Complete Hey everyone... I just finished up building an orig
2008-04-05 by Steve
Thanks. :) I might be doing a production case one within the next couple of weeks as well... Hopefully I'll have photos of that online too... For now I'm going to hop on my bike go enjoy the finally-nice weather here in SE Michigan. -Steve --- In analogue-sequencer@yahoogroups.co
2008-04-05 by Steve
Hey everyone... I just finished up building an original (preproduction?) case P3 for one of the members of this group, complete with a MemX and v4.00 beta 26 OS, and I thought you all might like to see pictures of it. I'm happy with how it came out, even with the difficulties enc
2008-04-03 by magnetize15
I have one of the original P3s that Colin used to pre-build, its about four years old. It doesnt have a serial number sticker anywhere on it but does come up "Sequentix 18" on bootup - maybe this the serial (Colin)? Anyway, its never left my studio since i bought it as i have gig
2008-04-02 by syntaxdevelopment
--- In analogue-sequencer@yahoogroups.com, "Colin Fraser" wrote: > >> I still intend to get one more run of memory boards made. > Just haven't found the time yet to arrange pre-orders. > This month, for sure. > Once those are gone, I'll make the details available for DIYers, > Gr
2008-04-01 by Colin Fraser
Hi Frank, > Is there a possibility to make a DIY memory board? Are there any > schematics/PCB example available? I still intend to get one more run of memory boards made. Just haven't found the time yet to arrange pre-orders. This month, for sure. Once those are gone, I'll make t
2008-04-01 by Zahir Manek
i used a screwdriver! duncan wrote: >>I upgraded to v4 and have been having some problems. the first is that i can't initialize the memory.
2008-03-31 by duncan
>>I upgraded to v4 and have been having some problems. the first is that i can't initialize the memory.
2008-03-31 by Zahir Manek
Hello, I upgraded to v4 and have been having some problems. the first is that i can't initialize the memory. i can get to the screen where it asks to confirm initialization, but it will only allow me to hit F3 to continue, not to confirm deleting everything. F1 or F2 wont' work.
2008-03-31 by Colin Fraser
> While we are talking about displays failing, is there a VFD > that is a drop > in replacement? I guess I'd like to make a "permanent" fix. I got a quote of roughly 40 ukp each for 16x2 LCD-compatible VFD displays from Noritake. They *should* work, though I haven't tested them -
2008-03-31 by James R. Coplin
While we are talking about displays failing, is there a VFD that is a drop in replacement? I guess I'd like to make a "permanent" fix. James R. Coplin (郭杰明) *************************************** Work is the Curse of the Drinking Class ***************************************
2008-03-31 by Colin Fraser
> However on farnell site (ordernumber1216289) i've found an > alternative > PLED module which still can be delivered. > > http://nl.farnell.com/1216289/electrical-circuit-protection/pr > oduct.us0?sku=ANDERS-ELECTRONICS-PDC1602M&_requestid=417298 > > I think this a good replacem
2008-03-31 by Colin Fraser
> -----Original Message----- > From: analogue-sequencer@yahoogroups.com > [mailto:analogue-sequencer@yahoogroups.com] On Behalf Of sean_zoega > Sent: 30 March 2008 11:44 > To: analogue-sequencer@yahoogroups.com > Subject: [analogue-sequencer] Re: PLED replacement suggestions? > >
2008-03-31 by sean_zoega
Sorry Colin, I didnt mean to have a go at your psychic abilities...adversely I wasnt aware that you would fit the display board. So sorry about that...a lesson maybe in not posting messages when I'm still pi**ed off because something wont work. I will put the P3 in the post. Than
2008-03-31 by syntaxdevelopment
You're right they are the same, obviously Anders Electronics has made a RoHS compliant equivalent under the same productname (PDC1602M) Farnell NL confirmed a shipment to be delivered in week 16 Regards, -Frank
2008-03-31 by syntaxdevelopment
Hi Colin, On your website you state: "Due to the discontinuation of the PLED display modules used in production P3s, any failed display will need to be replaced with an LCD module" However on farnell site (ordernumber1216289) i've found an alternative PLED module which still can
2008-03-31 by syntaxdevelopment
Hi there, Is there a possibility to make a DIY memory board? Are there any schematics/PCB example available? Will this memory expansion work with all version PCB's v1.4-v1.6? Regards, -Frank
2008-03-30 by Richard Scott
here here, Colin's service is second to none Richard ----- Original Message ----- From: ivancu@aol.com To: analogue-sequencer@yahoogroups.com Sent: Sunday, March 30, 2008 6:17 PM Subject: [analogue-sequencer] Re: PLED replacement suggestions? "I think potential customers should b
2008-03-30 by ivancu@aol.com
"I think potential customers should be aware that the sequentix is really a hobby item" Aside from a failing part from another vendor, I have never seen a product that is as well supported by a manufacturer as the P3. And it is truly amazing how quickly new features are incorpora
2008-03-30 by Jim Combs
--- In analogue-sequencer@yahoogroups.com, "sean_zoega" wrote: > > I've had real problems getting a p3 to work after the initial display > went...I am now onto my third diplay board..the last of which was > supplied directly by sequentix complete with adaptor board. I think > pot
2008-03-30 by sean_zoega
I've had real problems getting a p3 to work after the initial display went...I am now onto my third diplay board..the last of which was supplied directly by sequentix complete with adaptor board. I think potential customers should be aware that the sequentix is really a hobby ite
2008-03-29 by Nick Rothwell
Hi Colin, > I have a stock of the white on blue displays, but don't yet have the > adaptor > boards to fit them with a 16 way ribbon cable. Is there any follow-up on this? the PLED in my P3 has pretty much failed now; over the last two days it's gone from annoyingly patchy to bas
2008-03-27 by Kent Iverson
Thank you! Thank you! I will continue to strive for clarity! [Non-text portions of this message have been removed]
2008-03-25 by Kent Iverson
Oops, sorry about that. I was asked me to reply with a basic message... Carry on! [Non-text portions of this message have been removed]
2008-03-25 by Ditton33
I liked his post, it was one of the few I've understood. ...Graham ;-) > >-----Original Message----- > >From: analogue-sequencer@yahoogroups.com [mailto:analogue- > >sequencer@yahoogroups.com] On Behalf Of Steven Clements > >Sent: 25 March 2008 20:07 > >To: analogue-sequencer@yah
2008-03-25 by Steven Clements
cool --- In analogue-sequencer@yahoogroups.com, Kent Iverson wrote: > > Hello, > > I¹d like to start posting questions to the group. Here¹s my starter message > > Kent > > > [Non-text portions of this message have been removed] >
2008-03-24 by Kent Iverson
Hello, I¹d like to start posting questions to the group. Here¹s my starter message Kent [Non-text portions of this message have been removed]
2008-03-24 by Robert van der Kamp
Okay guys, I closed the auction for kits P3-035 and P3-061. No use to bid on them anymore, unless one of the sales go wrong (not that I expect it), and I reopen the auction. Thanks for you interest! Cheers, Robert
2008-03-21 by Steve
--- In analogue-sequencer@yahoogroups.com, "resfreq" wrote: > So, P3 kit #25 (revision 1.3) is listed on Ebay. > > I'm trying to do a US-only auction to avoid any customs issues with > ROHS... I'd hate for these to get caught up in customs somewhere. > > Item number: 190208271575
2008-03-21 by resfreq
Hi everyone, I've been hanging on to my P3 kit for years with the hopes of someday building it... but I never seem to have the time to get to it So, P3 kit #25 (revision 1.3) is listed on Ebay. I'm trying to do a US-only auction to avoid any customs issues with ROHS... I'd hate f
2008-03-18 by boops.secretvibes
thanks Robert!!! > Message du 18/03/08 19:31 > De : "Robert van der Kamp" > A : analogue-sequencer@yahoogroups.com > Copie à : > Objet : Re: [analogue-sequencer] version of pcb board? > > > > On Mar 17, 2008, at 22:57 , boops.secretvibes wrote: > > > hi,Mr Fraser which version pc
2008-03-18 by Robert van der Kamp
On Mar 17, 2008, at 22:57 , boops.secretvibes wrote: > hi,Mr Fraser which version pcb board for the P3 kit 035, and kit > 061?...best regards.. > Okay guys, I checked the board versions, and both are v1.4. Cheers, Robert
2008-03-18 by Robert van der Kamp
On Mar 17, 2008, at 22:57 , boops.secretvibes wrote: > hi,Mr Fraser which version pcb board for the P3 kit 035, and kit > 061?...best regards.. > I'll check the PCB versions tonight, report back here, and update the auction pages. Cheers, Robert