Re: Advice about Spyder3Studio
2009-06-09 by christoph fischer
ok. i repeat, what i ve written in my very recent posts: my printer (epson2100) produces a cyan-green color cast . spyderprint turns it in a green-yellow cast
Messages
Browse messages
Page 32 of 112 · 5574 messages matched
RE: [datacolor_group] Original Spyder on Vista 64
2009-06-08 by Bob Geoghegan
Thanks for saving me the frustration of trying to make it work. That puts a Spyder3 is on the shopping list pretty soon. Bob From:
Re: [datacolor_group] Original Spyder on Vista 64
2009-06-08 by CDTobie
Can the original Spyder be used for monitor calibration on a Vista 64 bit PC with a ViewSonic VP2250wb monitor? I’m sure there are all sorts of reasons why
Original Spyder on Vista 64
2009-06-08 by Bob Geoghegan
Hi all, Can the original Spyder be used for monitor calibration on a Vista 64 bit PC with a ViewSonic VP2250wb monitor? I m sure there are all sorts of
Re: [datacolor_group] Re: Advice about Spyder3Studio
2009-06-08 by CDTobie
i hardly can believe, that it should be possible to get a neutral gray gradient. printing a target without profile yet produces a strong green (ev. cyan cast).
Re: [datacolor_group] Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-06-08 by C D Tobie
... Sorry, missed this while traveling... ... I don t know, since I don t use videocard utilities... (for the reasons previously explained) ... The utility is
Re: Advice about Spyder3Studio
2009-06-08 by christoph fischer
i hardly can believe, that it should be possible to get a neutral gray gradient. printing a target without profile yet produces a strong green (ev. cyan cast).
Re: Advice about Spyder3Studio
2009-06-07 by Will Clark
Pleasant experiences here with Spyder3print and Spyder3elite for the Epson R800, 2200 and R2400 running with WinXp, an H-P 2207 monitor and PSCS 4. Tech
Re: [datacolor_group] Advice about Spyder3Studio
2009-06-07 by Cdtobie
There must be some specific issue with your 2100/2200; back in the day when those were common printers we had several of them, and had no difficulty profiling
Re(2): [datacolor_group] Advice about Spyder3Studio
2009-06-06 by Christoph Fischer
... see message 3386
Re: [datacolor_group] Advice about Spyder3Studio
2009-06-06 by Christoph Fischer
it took me a couple of months and tons of ink and paper for correcting the printer profiles for the Epson 2100 (=2200) with oem inks on matte papers. there was
Re: [datacolor_group] Advice about Spyder3Studio
2009-06-06 by Sat Tara S. Khalsa
I ve had good results on both the printer and display sides, with the S3S and an HP 9180 / Apple 23 Cinema Display combination. stsk
Re: Advice about Spyder3Studio
2009-06-06 by John Vitollo
... In this price range the only other alternative is the X-Rite ColorMunki. On the printer profile side of things the ColorMuki can not compete with
Advice about Spyder3Studio
2009-06-06 by a1ncsky2
I m using some older CM equipment that I m increasingly dissatisfied with. My monitor is a Dell LCD and main printer is an Epson 2200. I have been looking at
Re: Epson 4880 target printing
2009-06-05 by shreymel
Tried it and it works. Thanks I just a post further down, Photoshop doesn t have this problem! Shrey
Re: [datacolor_group] Re: Epson 4880 target printing
2009-06-04 by Cdtobie
Because in Photoshop these two options are automatically grayed out, so that if is not possible to make a choice. C. D. Tobie Global Product Technology Mngr.
Re: Epson 4880 target printing
2009-06-04 by Myron Gochnauer
... Ah Ha! *That* makes sense. I m sorry I didn t pick up on it before. I tend not to read about printers other than my own. (Too much temptation!) I only
Re: Epson 4880 target printing
2009-06-04 by shreymel
Thanks David, I ll give that a try. I had a preset which set Application Managed Colour when used in Photoshop etc, but it seems in Spider3Print, it does
Re: [datacolor_group] Re: Epson 4880 target printing
2009-06-03 by David Miller
... There s an easy answer for this. (and I think I ve already posted it here, but I ll repeat it now). When you printing from Leopard, you MUST -NOT- CHOOSE
Re: [datacolor_group] Re: Epson 4880 target printing
2009-06-03 by Cdtobie
UB version coming right up... C. D. Tobie Global Product Technology Mngr. Digital Imaging & Home Theater Datacolor.com CDTobie@Datacolor.com
Re: Epson 4880 target printing
2009-06-03 by shreymel
Hi Spider3Print does the same with an HP B9180 using a Mac. A workaround, like you found is to use Photoshop (or similar) to print the targets. I have already
Epson 4880 target printing
2009-06-03 by Myron Gochnauer
A few days ago I bought a new (for me) paper, and set about profiling it. I don t recall having any problems with the process once I got over the initial
Re: Dark prints from epson 7600 and 4880
2009-06-02 by Doug Kerr
Hi, David, ... An excellent point, and one not often given enough attention. I ve recently made some moves in that direction, including the installation of
Re: [datacolor_group] Re: Dark prints from epson 7600 and 4880
2009-06-02 by Cdtobie
Yes, Spyder3Elite has some advantages for LCD, and even more advantages for wide gamut and LED backlight LCDs. It also has some functions designed to make
Re: Dark prints from epson 7600 and 4880
2009-06-02 by malodiver@aol.com
Thanks for input. Some of this is probably just getting use to the major change in brightness of the Apple Cinema LCD. Beautiful for most things but not the
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-06-01 by ejc_1@swbell.net
WOW just got the link to the new Spyder Software 3.07, Looks nice now to understand it! Thanks Support!
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-06-01 by ejc_1@swbell.net
... It did not for me in my scenario. ... I just did a Dell ultrasharp and just reset it to factory specs and it did great. My Viewsonic on the other hand I
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-06-01 by rickbehl
Hi CDTobie, Thanks for the reply. Questions though: 1) Will unloading the ATI Catalyst Control Center cause any other issues I should know about before I do
Re: Dark prints from epson 7600 and 4880
2009-05-31 by ejc_1@swbell.net
See I learned something, I always thought the ambient light sensor impacted the color profile also, not just the brightness and contrast.
Re: [datacolor_group] Re: Dark prints from epson 7600 and 4880
2009-05-31 by Cdtobie
What we do with Spyder3 is to offer an Ambient Light Wizard that checks your light levels, and defines a display brightness that s appropriate for it. Than it
Re: Dark prints from epson 7600 and 4880
2009-05-31 by Tyler Boley
this has gone from a rare odd problem to a near epidemic problem, obviously traced to the rise of the new monitors. As someone who meticulously calibrates
Re: [datacolor_group] Green Tint after Calibration with Sypder2plus v 2.3.6
2009-05-31 by Cdtobie
Keep talking to support; there should be a way to delete the old driver thoroughly if that s the issue. C. D. Tobie Global Product Technology Mngr. Digital
Green Tint after Calibration with Sypder2plus v 2.3.6
2009-05-31 by nvmoss
I have been using a Samsung 275t LCD monitor for about 1 year. I have calibrated it numerous times with the Sypder2. A week of so ago, I updated the software
Re: Dark prints from epson 7600 and 4880
2009-05-31 by John Vitollo
... Yea that s the key... is to have the brightness of your workspace or proofing light/booth match the brightness of the monitor. My workspace is my basement
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by ejc_1@swbell.net
Very cool!
Re: Dark prints from epson 7600 and 4880
2009-05-31 by ejc_1@swbell.net
I agree, found that my dark prints went away once I reduced the bightness and had a monitor properly calibrated. Key was the brightness.
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by ejc_1@swbell.net
That is the one ting I liked about my Viesonic and Perfect Suite, all you do is rotate the monitor and it auto changed. I think you can buy it and use it on
Re: [datacolor_group] Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by Jim Miller
just discovered that winv7 will have native support for monitor rotation! woohoo! jtm
Re: [datacolor_group] Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by Jim Miller
the monitors are both dell 2408wfp. the software provided and preloaded is the ati software. i ve not found any problems so far with having the ati software
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by ejc_1@swbell.net
What brand monitor? If it rotates it did not come with software?
Re: [datacolor_group] Dark prints from epson 7600 and 4880
2009-05-31 by Robert Peirce
... I suggest a few test prints. I (and many others) have had problems matching the brightness on the screen with the brightness on the prints. I found, like
Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by ejc_1@swbell.net
I was using Perfect Suite for monitor rotation only on my Viewsonic. It had the ability to calibrate but I ignored it and used the Spyder 3.
Re: [datacolor_group] Re: Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by Jim Miller
yes, we often have the main monitor in a normal landscape orientation and the second monitor in a portrait orientation. the ati utility is the only place
Re: [datacolor_group] Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by C D Tobie
... Yes, this is where people get stuck, there is some special feature (resolution, portrait option, gaming mode) that they want from the graphics card
Re: [datacolor_group] Dark prints from epson 7600 and 4880
2009-05-31 by David Miller
... Maybe you do; but then again, you may be making a mistake here. Photoshop Manages Colors: yes, that s correct, but what do you have selected in the popup
Re: Questions regarding monitor calibration with a Spyder3 Elite [1 Attachment]
2009-05-31 by ejc_1@swbell.net
Are you talking the ability to rotate your whole screen?
Re: [datacolor_group] Questions regarding monitor calibration with a Spyder3 Elite [1 Attachment]
2009-05-31 by Jim Miller
unfortunately the ati utility is the only way i ve found to signal to allow for a portrait rather than landscape setting for my second monitor. i ve found no
Re: [datacolor_group] Dark prints from epson 7600 and 4880
2009-05-31 by C D Tobie
... Well, have you lowered the brightness of the LCD all the way down yet? And raised your ambient lighting a bit as well? Until you get that balance right,
Dark prints from epson 7600 and 4880
2009-05-31 by malodiver
I bought an Apple 23 Video display. Now despite callibration with Spyder II, Photoshop CS4 managing color, my prints are coming out dark and the shadows are
Re: [datacolor_group] Questions regarding monitor calibration with a Spyder3 Elite
2009-05-31 by C D Tobie
... Absolutely nothing. In fact, if you have a videocard utility loaded, unload it. The problem is that videocard companies tend to forget that the LUTs in the