Re: [disklavier] Moving or long term storage
2016-06-20 by Spencer Chase
Do you know someone who could borrow the piano for a while? If you don t know anyone personally, what about a school or maybe an assisted living facility? Long
Messages
Browse messages
Page 24 of 274 · 13692 messages matched
Moving or long term storage
2016-06-20 by d_day6666@...
Greetings DPO Forum! After a year long deployment in Afghanistan I have been rewarded with a move to Seoul S. Korea where I expect to live on post (Yongsan).
Re: speakers for disklavier
2016-06-19 by wandamusic@...
Thanks!
Re: speakers for disklavier
2016-06-19 by ken.batten@...
Hi Wanda I found the link: http://www.phonopreamps.com/TC-780LCpp.html http://www.phonopreamps.com/TC-780LCpp.html . Hope this helps! Cheers Ken
Re: speakers for disklavier
2016-06-14 by wandamusic@...
Re: speakers for disklavier
2016-06-14 by ken.batten@...
I had XG sound problems for some time with my MkIIXG - non silent - piano. 1999 model and still going strong. I tried a few powered speakers and as was
Re: [disklavier] speakers for disklavier
2016-06-08 by mateodavidsoell@...
Yes, Bluetooth is out for sure ... and wired better matches our tight budget at the moment too.
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-08 by mateodavidsoell@...
Thanks George - that makes sense! I have to admit that I am a bit nostalgic in all things .. even in technology and it is a ride down memory lane to use
Re: [disklavier] speakers for disklavier
2016-06-07 by George F. Litterst
Good afternoon, everyone. I echo the sentiment to avoid using Bluetooth speakers with a Disklavier. A big reason to avoid them is that Bluetooth speakers have
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-07 by George F. Litterst
Good afternoon, everyone. Just a follow-up point regarding the serial ports on Mark III and earlier Disklaviers. At this point, these serial ports are
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-06 by Bill Brandom
I don t know about that but I am a lover of Disklavier! Bill Love God. Love People. Make a difference. On Jun 6, 2016, at 11:39 AM, mateodavidsoell@yahoo.es
Re: [disklavier] speakers for disklavier
2016-06-06 by mateodavidsoell@...
Thanks for sharing your experience! -Matt
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-06 by mateodavidsoell@...
Thanks Bill - you re an expert! -Matt
Re: [disklavier] speakers for disklavier
2016-06-06 by Bill Brandom
There is both an AUX IN and AUX OUT. You will use the AUX OUT to get audio to your speakers or sound system. The AUX IN allows you to send audio INTO the
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-06 by Bill Brandom
Sorry, my explanation was poor. Use the MIDI IN and MIDI OUT on the Disklavier unit AND set the To Host setting to MIDI, to activate the unit s MIDI Ports.
Re: [disklavier] speakers for disklavier
2016-06-06 by mateodavidsoell@...
Kim, Thanks for the idea of the beefy speakers! :) Matt
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-06 by mateodavidsoell@...
Bill, Sorry for this very dumb follow up question. Use the MIDI ports on the piano ... Do you mean the midi in/out ports on the box/unit? ... not that there
Re: [disklavier] speakers for disklavier
2016-06-06 by mateodavidsoell@...
Bill, thanks! I would have never thought to climb under the piano and look at the back of the unit! I saw another input on the inside (toward the center of
Re: [disklavier] Re: speakers for disklavier
2016-06-06 by mateodavidsoell@...
Joseph, great idea!
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-06 by Bill Brandom
Just read what I wrote. CORRECTION: Use the MIDI ports on the piano, going to a MIDI to USB interface THAT IS CONNECTED TO YOUR COMPUTER. One other point -
Re: [disklavier] speakers for disklavier
2016-06-06 by Kim Cauchy
Matt, I use Yamaha powered monitor speakers model MSP3 that work and sound great. They are not cheap but are built like a tank. Kim From: mateo sell
Re: [disklavier] anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-05 by Bill Brandom
Use the MIDI ports on the piano going to a MIDI to USB interface to go to your Disklavier. Yamaha makes a UX16 MIDI interface that will work, but there are
Re: [disklavier] speakers for disklavier
2016-06-05 by Bill Brandom
You will find an AUX out (stereo mini pin) jack on the back of the Silent box. Use that for your audio output, not the headphone jack. Bill Love God. Love
Re: [disklavier] Re: speakers for disklavier
2016-06-05 by Joseph F. Bert (Joe@FinancialGroup.com)
My suggestion is to get a pair of powered speakers and mount them under the piano on swivel mounts. The audio output on the dkv is weak. Also you ll avoid
Re: speakers for disklavier
2016-06-05 by mateodavidsoell@...
Disklavier Speaker Check list ? spec.s/functions of the speakers needed to use the features of Mark IIXG? ? spec.s/functions of the speakers needed to use the
Re: [disklavier] speakers for disklavier
2016-06-05 by mateodavidsoell@...
Spencer, that makes good sense about bluetooth. I too am a person that wants to hard wire when possible ... and looking at the piano ... assuming the
Re: [disklavier] speakers for disklavier
2016-06-05 by Spencer Chase
if you care about quality of sound i would not use bluetooth speakers. wires are very reliable, bluetooth often is not. we have a wide range of bluetooth
anyone with a YU3SXG MarkIIXG silent disklavier? ... must have equipment? ... and connecting to a mac computer?
2016-06-05 by mateo sell
We are are on the learning curve and practice & try out a new features each day from the manuals on our YU3SXG MarkIIXG silent disklavier … I’m glad we are
speakers for disklavier
2016-06-05 by mateo sell
Hello! We have quickly realized that having a pair of small speakers (just to use in our home, not performance or large setting) would be very helpful. I
Mark 1V disklavierdisklavier
2016-06-05 by William Waters
My lower case notes work but produce no tones upper case works fine. Any thoughts thx Sent from my iPad
new to the group and excited to learn
2016-06-04 by mateo sell
Hello from the Canary Islands! We are originally from Indiana, but we have lived in this part of the world for quite some time. With no real acoustic piano
Re: DKC 100R message (PWM over)
2016-05-30 by veejayway@...
Thank you Bill. I ll call them this week and post the results.
Re: [disklavier] Re: DKC 100R message (PWM over)
2016-05-29 by Bill Brandom
Ok. It sounds then like a power supply problem or a short somewhere. You should call Yamaha Piano Service at 714-522-9894. They can advise how to further
Re: DKC 100R message (PWM over)
2016-05-29 by veejayway@...
Both errors occurred before any playback. The second occurred without any recording or playback. Thanks, Paul
Re: [disklavier] DKC 100R message (PWM over)
2016-05-29 by Bill Brandom
Please clarify. Did the error come on while you were doing your recording or when you were doing the playback of your recording? When you turned the unit off
Re: [disklavier] DKC 100R message (PWM over)
2016-05-29 by veejayway@...
Thanks Bill. I followed the directions that you gave in the last post. The message came up before I finished recording the 10 hit pattern. I turned off the
Re: [disklavier] DKC 100R message (PWM over)
2016-05-28 by Bill Brandom
Ok. It sounds like you have either a bad solenoid or bad solenoid driver board. To confirm, make a recording of you loudly playing each key 10 times, going up
Re: [disklavier] video synchronised with Mark III DC3A [2 Attachments]
2016-05-28 by Mark Fontana
Fran, if you recorded a MIDI file of your playing at the same time as the video was shot, you can convert the MIDI file to a Yamaha MIDIWAVE stream to
Re: [disklavier] DKC 100R message (PWM over)
2016-05-28 by veejayway@...
The piano will play through 2-3 tunes and then abruptly stop and give the message. I then turn off the unit and then back on, after which it will play for a
recent photos
2016-05-28 by <manginjac@...>
Hi, I ve got those photos from our last meeting, just take a look In haste, manginjac@wanadoo.fr
Re: [disklavier] DKC 100R message (PWM over)
2016-05-27 by Bill AOL
It is a Pulse Width Modulation error. This normally indicates a short in the drive system or a power supply problem. Does it occur immediately after turning on
DKC 100R message (PWM over)
2016-05-27 by veejayway@...
Hello, I m getting an error message of (PWM over) piano power off Does anyone know what this means? Thank you, Paul Cole
video synchronised with Mark III DC3A
2016-05-26 by fannychanart@...
Hello, I have a video and would like its background music being played by a MarkIII DC3A piano (with keys movement), while I play the video on a TV at the same
RE: [disklavier] Sustain pedal too "heavy" on release and how to calibrate it
2016-05-26 by Geoff Ward
Me too, Thanks Bill Geoff Ward From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] Sent: Thursday, 26 May, 2016 6:53 AM To:
Pedal noise
2016-05-26 by Peter Phillips
Damper pedal drop noise My first contribution to a forum I have been reading for many years! I have a Mark 4 C5 Pro Disklavier, replacing a Mark 2 DKV in a C7
Re: [disklavier] Sustain pedal too "heavy" on release and how to calibrate it
2016-05-26 by Dmitry
Sorry, George (made a typo before!)
Re: [disklavier] Sustain pedal too "heavy" on release and how to calibrate it
2016-05-26 by Dmitry
Hi guys, Bill - thank you for the information - will try to use it on weekend. Gorge - Thank you! I really forgot about that! That might be one of the issue
Re: Sustain pedal too "heavy" on release and how to calibrate it
2016-05-25 by dmitryos@...
Hi Joe, In addition to Bill s info this would give also a bit of information -
Re: [disklavier] Mark IV iso image
2016-05-25 by Kevin Goroway
Dmitry, Please contact me directly off the list. I have managed to build DKVBrowser native for linux.gtk.x86 and linux.gtk.x86_64. I no longer have a good
Re: [disklavier] Sustain pedal too "heavy" on release and how to calibrate it
2016-05-25 by Joe Priest
Bill: Would you be kind enough to send the same information to me? Thanks.