Re: emax disk header format
2012-03-25 by codehead
Thanks—yeah, I figure out the header was about 0x7000 plus what seemed to be a variable amount of small additional—fine to just clip it there for
Messages
Browse messages
Page 70 of 236 · 11758 messages matched
Re: emax disk header format
2012-03-25 by esynthesist
For fast auditioning of what s in a collection of EM1 files, the EMU2WAV approach sounds indeed like a very good method, especially if you adapted the source
Re: emax disk header format
2012-03-25 by codehead
Hi e-synthesist. Your emxp looks like a great tool for emax users. I probably won t use it though—I can convert a directory of every .em1 file I download in
Re: emax disk header format
2012-03-25 by esynthesist
The source code of EMXP is not available. But you don t need it because the EMXP executable can perfectly transform all samples from your old EMX images into
Re: emax disk header format
2012-03-25 by codehead
To elaborate on the glitch in EMU2WAV, consider the 8-bit source sample (before it gets expanded back to 12 bits) ranging from -128 to +127; 0-127 pass
Re: Emax pedal input and control voltages
2012-03-25 by codehead
I think out might be wrong about the pedal not being a control voltage. The emax owners manual says, ...eight possible control sources...4. Control voltage
emax disk header format
2012-03-25 by codehead
I haven t had my emax out in years. It was a plain one that I upgraded to SE when that came out, and factory upgraded to HD when that came out. I sure was
Re: Emax pedal input and control voltages
2012-03-24 by bertbong
A CV Pedal Input is not a CV Control Voltage input! I don t think the emax will like to receive +/- 5 Volt there... A standard CV Pedal is a Trim Pot ! I
Re: Emax pedal input and control voltages
2012-03-24 by codehead
One of my interesting memories with my emax...when it was relatively new (pre-SE, pre-HD), I turned it on and all audio-hell broke loose—had to scramble to
FS: E-MU SP-12 Turbo 12bit + Commodore 1541-II drive and floppies
2012-03-13 by Phil
Selling my E-MU SP-12 Turbo in fully working condition with its power cord and a Commodore 1541-II drive with original power supply, the cable to connect it to
Re: Front panel re-print
2012-03-12 by Ted Summers
The SE functions are on this panel print.... confirmed the PLUS 1.0 OS only added the feature of TRANSPOSE for SCSI ID change. This isn t on the print, but
EMAX INTERNAL ZIP UPGRADE
2012-03-11 by WILLIAM
http://www.facebook.com/media/set/?set=a.10150672243361069.417978.603841068&type=1
Re: [emax] Re: Front panel re-print
2012-03-07 by Ted Summers
I dunno if it has 1.0 Plus OS functions- I never looked at it for that.... as far as I know the only thing PLUS OS bought was the ability to use the Transpose
Re: Front panel re-print
2012-03-07 by soundsubs
Hey Ted--- does your sticker reprint include all the functions of the last plus 1.0 OS? Did you redo the font or just scan it in and print it?
RE: [emax] Re: HELLO emax II Ram upgrad 8 MB
2012-03-04 by philippe.69
the exchange of memory and made I have the 8 Mb on my keyboard and 2 mb s in the rack I sell the rack with SCSI drive CF install + slim floppy drive with the
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by jammie
the manual for the calibration is in the files section if you cant get full range then thats a problem with the cv dac and the ssm2300 for the filter circiuts
Re: Emax pedal input and control voltages
2012-03-02 by zrennaya
You re right Ted, I think I m better off without this whole CV thing. I only came this far because I read in the manual that it s supposed to accept any CV
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by Ted Summers
A little knowledge can be a dangerous thing. So you continue down this road of doing what is not recommended. I recommend you stop and get a meter before you
Re: Emax pedal input and control voltages
2012-03-02 by zrennaya
Okay I think I missed the 0-10V part in the manual...I checked now and it s there, so my bad! So now I experimented with my CV source changing the gain on its
RE: [emax] Re: Emax pedal input and control voltages
2012-03-02 by el macaco
The manual says the pedal takes 0-10 volts, so the problem is the negative voltage. The service manual says you can input a voltage to the tip of the plug 0-9
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by Chase Smith
Yeah, this is what someone told me in the group a few years ago when I was trying to use an mc-4 with the pedal input and it wouldn t track right. The
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by jammie
i thought that it was when using a pedal if using another device to send cv into the pedal cv then you are asking for trouble its not that kind of cv the cv
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by Ted Summers
If I understand what was said, it was attempted to connect a different, external device (not a pedal) to send a control voltage onto one of the connections of
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by jammie
usually the cv pedal gets its voltage from the emax usually its 0-10vdc for a cv pedal this gets sampled by the multiplexer then it will go to the uart which
Re: [emax] Re: Emax pedal input and control voltages
2012-03-02 by Chase Smith
My understanding is that the emax sends a cv out of the pedal input maybe on the ring of a trs jack and that with the ground goes to the inputs on a pot and
RE: [emax] Emax pedal input and control voltages
2012-03-02 by el macaco
can the pedal inputs take negative voltage? To: emax@yahoogroups.com From: jammie.emma@blueyonder.co.uk Date: Fri, 2 Mar 2012 12:09:53 +0000 Subject: Re:
Re: Emax pedal input and control voltages
2012-03-02 by zrennaya
Thanks jammie..again! So if I got you correctly, that particular ssm2300 has several channels (I m guessing 8), emax uses one for each of the onboard CV
Re: [emax] Emax pedal input and control voltages
2012-03-02 by jammie
ssm octal sample and hold ic is damaged ssm2300 exchange for a smp08 by analog devices its a pin for pin replacement and has a better slew rate the pitch wheel
Emax pedal input and control voltages
2012-03-02 by zrennaya
Hi everybody! I have another issue with my Emax, I ve tried to use a CV signal to alter the filter cutoff -since there s only a sinewave internal LFO. The
RE: [emax] hd se plus os
2012-02-29 by philippe.69
Hello Hi I can troubleshoot if you live in the European @++ philippe ... De : emax@yahoogroups.com [mailto:emax@yahoogroups.com] De la part de WILLIAM
hd se plus os
2012-02-29 by WILLIAM
Hey guys, Anyone have an hd/se plus OS I can purchase? No capability for burning my own and Route 66 studios is radio silence lately. Thanks, William
Rack Ears
2012-02-29 by caillard a
Hi, I ved bought an emax rack but i don t have rack ears. Could someone tell me if i can buy standard rack ears anywhere or build them by myself ? Thanks.
Re: [emax] Re: Front panel re-print
2012-02-29 by Ted Summers
I got the sticker. I got the file. The sticker s white lettering is brighter than the original. I am liking it! I am going to affix this to my Baldwin, as the
Re: [emax] Front panel re-print
2012-02-28 by Ted Summers
I just went into Kinko s with my original. It s $30 to have this made into a vinyl sticker. A bit more than the $12 that was suggested. I gave them the go
Selling Emax HD SE
2012-02-27 by Luke Bretthauer
Selling my emax. http://www.ebay.com.au/itm/260963602597?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_500wt_951 Sydney, AU. [Non-text portions of
Re: Front panel re-print
2012-02-27 by soundsubs
... if you want to use all of the available space it measures 17 by 7.25 the angle is tough to tell. i wouldnt mind if the text followed the angle like on
Re: Front panel re-print
2012-02-27 by BradM
I can, Graphic designer by trade. If someone can scan the original or take a picture along with a ruler so I know the dimensions or can send me the dimensions
Re: Front panel re-print
2012-02-26 by soundsubs
... according to kinko s, printing this will be about $12. but i have to get it into a digital format that can print, and have the layout done.
Re: [emax] Front panel re-print
2012-02-26 by Ted Summers
Are you saying you don t have the original? I have an original, but when I was looking into this a couple years ago, it was cost prohibitive to make them. On
Front panel re-print
2012-02-26 by soundsubs
((New file in files section named Emax Plus Version 1.0.RTF )) I have a Baldwin/Emax and i d like to get a top/front panel printed so that i can stick it on
Re: Awave error
2012-02-24 by jaumemod
Here s : http://launch.groups.yahoo.com/group/emax/files/%20EB2%20to%20SF2/
Re: Awave error
2012-02-24 by jaumemod
I don t know how...but finally I resolved. Reading EMXP manual it seems that It can´t conserve some parameters of the SF2 files like envelope or convolution.
Re: Awave error
2012-02-24 by esynthesist
In general it means that during conversion to Emax II format, EMXP found some samples in the SoundFont2 files which are not used by any preset/instrument
Awave error
2012-02-24 by jaumemod
I m trying to insert a new samples on a previous Emax II bank like loops and effects samples through Awave in SF2 format converted with EMXP. When I finish to
Re: HELLO emax II Ram upgrad 8 MB
2012-02-24 by emax_dx5
Philippe: What are the symphtoms for a non starting?. Does the display show something?. Are voltages OK and stable on the power supply outputs? I agree with
Re: [emax] HELLO emax II Ram upgrad 8 MB
2012-02-24 by Simon Forsyth
well.. I have transplanted successfully.. the panel board doesn t even come into it ________________________________ From: philippe.69
RE: [emax] HELLO emax II Ram upgrad 8 MB
2012-02-24 by philippe.69
I tested the exchange of mainboard it does not start for the 3rd time the panel button and lcd are not compatible between emax II Rack and emax II Keyboard ...
Re: [emax] HELLO emax II Ram upgrad 8 MB
2012-02-23 by Simon Forsyth
you are getting confused between the display board and the main board.. the main board holds the relevant ICs and is perfectly interchangeable between keyboard
HELLO emax II Ram upgrad 8 MB
2012-02-23 by Vavasseur Philippe
I have an emax II 2 MB keyboard version I buy a rack 8 MB and I want to recover the 8 Mb and placed in the keyboard 2 mb and put in the rack the main board is
Re: [emax] filter trims?
2012-02-23 by jammie
its in the files section but you need to do a recalibrate before using the must disk as the must disk is for checking that tthe recalibration has worked ...