CZ-101 LCD display stays on when turned off
2012-09-30 by Jerome St-Pierre
Hi all, I recently got a CZ-101 for 200 euros from someone who was the first owner. Everything was suppose to be work, but of course the line select #1 light
Messages
Browse messages
Page 37 of 145 · 7206 messages matched
Dumps of VZ-1 ROM cards
2012-09-28 by torgeirsh
Hi! Just got a VZ-1 and am looking for patches. Does anyone have dumps of all the Casio ROM cards? A lot of them are in the files section, but some seem to be
Repairing RA-3 card.
2012-09-27 by erik
I have a card for my CZ1000 that shuts off after about 5 minutes. I ve replaced the battery already. Bad capacitor? Has anyone fixed this problem before?
RA-3 Card issue
2012-09-25 by erik
I bought a RA-3 card off of ebay and replaced the battery. After the card is recognized in the CZ1000 the memory bank switches to preset by itself after about
Re: M/T help thanks
2012-09-18 by steve_the_composer
Nice to know that even after 8 years, the info is still helpful. Steve
Re: M/T help thanks
2012-09-15 by ohdotoh
Exactly why I joined this group. Useful information. Thanks! -- Sean
Re: cz patches
2012-08-20 by steve_the_composer
Footnote: I did not remember the demo chords/notes correctly. See Demo_Notes jpeg uploaded today. See also the Track_Data_Labelled jpeg. Each sysex bank
Re: cz patches
2012-08-20 by steve_the_composer
Thanks for the reply, Daniel. It looks like 8 years ago I created and posted a set of midi files to let uses demo patches. I seem to recall testing it on the
Re: [CZsynth] Re: cz patches
2012-08-20 by Lee Borrell
In another strand some time ago it was mentioned that I have the defeat CZ handshaking blurb online - I so far have not managed to overcome the rather
Re: cz patches
2012-08-20 by Frank M.
I know.....the horror. I spent so many hours programming my CZs, I m burnt! Syx is the way to go. Not meant to sound discouraging at all, it s just a lot
Re: [CZsynth] Re: cz patches
2012-08-20 by Daniel Forró
I m not quite sure if something like this is possible, as CZ synths use rather non standard handshaking communication... Daniel Forro
Re: cz patches
2012-08-20 by steve_the_composer
Considering that this list is over 20 years old, I am wondering if anyone has saved them as a sysex file or perhaps as a midi demo file--open that sends the
cz patches
2012-08-19 by charlie 'chop' copp
i know they are from the net but here is a good many to explore. From ucsd!ucbvax!tut.cis.ohio-state.edu!bloom-beacon!athena.mit.edu!paul Tue May 2 16:14:09
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-17 by Daniel Forró
Hi, Summa, I always like and appreciate your messages, and admire your knowledge about synthesizers and programming :-) Thanks for explanation! We have the
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-17 by Summa
... Well, planed not to bore the reader with to many technical details, since at the end it s not making that much difference and tends to be cumbersome and
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-17 by Daniel Forró
Although you are right in most facts you have written, there are some small inaccuracies which maybe ask more explanation. Casio called this type of synthesis
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-17 by Summa
... Edit: 8 Level/8 Rates -- CZ/VZ mailing list : http://groups.yahoo.com/group/CZsynth FMHeaven mailing list : http://groups.yahoo.com/group/fmheaven/ FS1R
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-17 by Summa
Hi, according to the specs their are some main differences, like the VZ-1 do combine (well, let me call it) Phase Modulation with Ringmodulation, even is able
Re: [CZsynth] Re: VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-16 by Wilson Zorn
But of course! :D ... [Non-text portions of this message have been removed]
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-16 by José Ángel Morente
Hi, I own both synths the VZ-1 and the FS1R and in my opinion they are absolutely different beasts. And I love them! You can take a look to this video I made
Re: VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-16 by urmeldaehn
;-) without any discussion: the casio is the better (more useable) machine!!!!!
Re: [CZsynth] VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-16 by Daniel Forró
VZ1 is quite different machine and type of synthesis (iPD), there s no similarity between both. It makes different sounds, but don t expect miracles. I don t
VZ-1 vs. Yamaha FS1R 8 op FM synth?
2012-08-14 by mz82003
Hi, I have the opportunity to buy a used VZ-1. I already own a Yamaha FS1R 8 op FM (that is actually PM) synth, and according to its specs the VZ-1 has many
Re: [CZsynth] Re: CZ-1 maximum key velocity level
2012-08-14 by Lee Borrell
On the subject of velocity re-scaling - whilst I was talking about this - in the back of my mind was a memory of a small box that altered velocity - as luck
Re: [CZsynth] Re: CZ-1 maximum key velocity level
2012-08-14 by Ullrich Peter
The foil solution also works for some time but the 3M self adhesive rubber pads that Bob Weigel sells are the best solution... Not cheap but nice working. And
Re: [CZsynth] Re: CZ-1 maximum key velocity level
2012-08-14 by Lee Borrell
That s very interesting - just a small note about those rubber/carbon contact strips - I have noted before that I have fixed them using tin foil stuck on with
Re: CZ-1 maximum key velocity level
2012-08-14 by xelectric123
Fran, thank you for your input. So it seems there s something wrong with mine, because no matter how hard I try, it won t send velocity higher than 96. Yours
Re: CZ-1 maximum key velocity level
2012-08-13 by narfman96
I took my CZ-1 apart and fixed the dead key. I adjusted VR1 and it did not change the velocity. I ranged it from 1.98 vdc to 2.56 vdc with no change in
Re: CZ-1 maximum key velocity level
2012-08-13 by narfman96
Ok, this may be way too much fun but here s what I found.... My CZ-1 outputs 7F (127) for velocity using Midi-Ox to display the notes. I have to really slam
Re: CZ-1 maximum key velocity level
2012-08-13 by xelectric123
Hey Lee, thanks for your input, though it won t help much, as it would be a pain to record something from any outboard synth, whether by manually rescaling
Re: About me. (ROM dumps, make a Casio keyboard emulator?|CZ-230S firmware)
2012-08-12 by analogmonster@ymail.com
I also used to use your site alot, back when I was circuit bending. I am now building my own synth modules, as well as studying for an electronics degree so I
Re: About me. (ROM dumps, make a Casio keyboard emulator?|CZ-230S firmware)
2012-08-12 by fulfil_objective
Hi Christian, Thanks for the introduction. I have been on your website many times before, and have the table hooters section bookmarked. I am also interested
Re: [CZsynth] CZ-1 maximum key velocity level
2012-08-10 by Lee Borrell
Whilst this may not be of use to you - you can re-scale velocity using MIDI-ox - the program contains a message modifier - that can basically alter any midi
CZ-1 maximum key velocity level
2012-08-10 by xelectric123
Hey guys, recently my main master keyboard has damaged, so I ve temporarily started using CZ-1 to control other synthesizers, as it is my only other keyboard
RE: [CZsynth] CZ3000
2012-08-05 by Mike Ward
Correct. From: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] On Behalf Of Daniel Forró Sent: Saturday, August 04, 2012 8:15 PM To:
Re: [CZsynth] CZ3000
2012-08-05 by Daniel Forró
Bulk dump has nothing to do with cartridge. It means transmitting SysEx data to MIDI or receiving them into instrument. Daniel Forro
Re: [CZsynth] CZ3000
2012-08-05 by Daniel Forró
Then it s not bulk dump - this term is used last 29 years in the world of MIDI only for SysEx transfer. What you want is just saving to cartridge. Daniel Forro
RE: [CZsynth] CZ3000
2012-08-05 by Mike Ward
Spot on. From: CZsynth@yahoogroups.com [mailto:CZsynth@yahoogroups.com] On Behalf Of Lee Borrell Sent: Thursday, August 02, 2012 8:08 AM To:
RE: [CZsynth] CZ3000
2012-08-05 by Mike Ward
I’m trying to do a bulk dump of A1-8, B1-8 and C1-8, D1-8 using the cartridge button of the CZ3000. This does not work, but doing an individual preset does.
About me. (ROM dumps, make a Casio keyboard emulator?|CZ-230S firmware)
2012-08-04 by CYBERYOGI =CO= Windler
Hello, I am collector of music keyboards and electronic sound toys and partly modify them into synthesizers. Here is my keyboard site:
Re: OT Sibelius
2012-08-04 by Daniel Forró
Dear friends, I m not sure if all of you are informed about recent situation concerning Sibelius score editor software. Please read this and consider signing a
Re: [CZsynth] CZ3000
2012-08-02 by Daniel Forró
Description in manual looks clear and easy, it should work... If not, problem can be in the instrument or in the cartridge. You can check where problem is by
Re: [CZsynth] CZ3000
2012-08-02 by Lee Borrell
I think Mike is after saving to cartridge - I have to say - I have not used this facility any more than once on a RA100/HT700 - not used it on the CZ,since the
Re: [CZsynth] CZ3000
2012-08-02 by Daniel Forró
As you mix more themes in your question, I m confused what you want to know. 1. Saving all internal programs to cartridge at once? 2. MIDI SysEx bulk dump? 3.
CZ3000
2012-08-02 by Mike Ward
Hello all, I have a question. I have a CZ3000. I can write individual presets to the cartridge by pressing the preset I want to write, then I hit the write
Re: Old CZ1000, factory patches help
2012-07-22 by narfman96
The factory presets are always available in the CZ-1. Hold down the Initialize button and select a patch using the bank and patch number buttons. Ex. A1
cz101 cartridges
2012-07-21 by eddie
does anyone know whereI can find these things?had no luck on ebay or graigslist.I live in a very small southern town, so I m having to beat the bushes.Please
Re: [CZsynth] Old CZ1000, factory patches help
2012-07-20 by bill bigrig
Push the P button AFTER power up. Rig [Non-text portions of this message have been removed]
Re: Old CZ1000, factory patches help
2012-07-19 by noisepenguin
I posted this at work and now I realize my synth is a CZ-1!!! How would I restore one of these to the factory presets?
Re: [CZsynth] Old CZ1000, factory patches help
2012-07-19 by Lee Borrell
To my knowledge - insert a pen/pencil/sharp object into the P button on the base of the unit when powering on - this will return it to basic settings.