Re: sensitivity
2010-02-24 by Dustin T
Thanks a lot Keith, that helped a lot.
Messages
Browse messages
Page 6 of 283 · 14139 messages matched
Re: sensitivity
2010-02-22 by keith1200rs
Dustin, Try increasing the gain to 99 and MVEL to 1. These are extreme values, so you may have to wind them back a bit. You may start to get double triggers.
sensitivity
2010-02-22 by Dustin T
ok, so my DTXpress sounds great, but I can t seem to get the sensitivity setting to where they will pick up all of my ghost notes and light rolles on the toms
Thanks again!
2010-02-22 by Dustin T
With everyone s help I was able to get an adaptor that didn t fry my brain so thanks again!
Re: Low Battery Warning
2010-02-19 by keith1200rs
... Yes you can do it yourself. I think its a CR2032 but I am not sure. I found this in the archives: Remove two screws on each side and one on the back and
Low Battery Warning
2010-02-19 by Stimpy_bum
Hello all I have a DTxpress and it s warning me about low battery. Can I change this myself. How do I fix this problem? Thanks.
Re: Power Supply
2010-02-16 by keith1200rs
... DON T DO IT!!! The Yamaha wants 12V DC - the one you described is AC (=big bang). A generic adaptor will be fine. My UK one is 12V 0.5A DC centre positive
Re: [DTXpress] Power Supply - BS of D
2010-02-16 by S-E-A
Hi Dustin. Not recommended!!!! The voltage is ok, but the polarity is reversed, Roland s have the centre pin as -ve. The Yammy has centre pin +ve. As the
Power Supply
2010-02-16 by Dustin T
Ok guys, here s another question for ya; My DTXpress that I ordered doesn t come with a power supply but I have this big ass power supply from my Roland TD-7
Re: DEXTD 2 way mode
2010-02-15 by Chris
Peter, Thanks for the reply! Even in it s current form it is very useful to me. If you do decide you want/need a challenge I d be glad to support in any way
Re: What is the difference?
2010-02-15 by Dustin T
Thanks guys, I appreciate it. I owned the original back in 99 and have owned the III as well, but couldn t remember the difference. I just ordered an original
DEXTD 2 way mode
2010-02-15 by Peter Lawrence
Chris, I m glad you like DEXTD but I m afraid I haven t looked at that programme for a number of years. It was designed to work with the DTXpress II as that
RE: [DTXpress] What is the difference?
2010-02-15 by Damon, Rob
Dtxpress 1 came out in 1999, basically when this group was started, look at post no. 1 in this group. Dtxpress 2 came out in 2002. Dtxpress 3 came out in 2005,
RE: [DTXpress] What is the difference?
2010-02-15 by Damon, Rob
Other than a few upgraded sounds, they were only a few changes. On the Dtxpress 1, the inputs 2, 6 and 7 were only 2 zone inputs. On the Dtxpress 2, the inputs
DEXTD 2 way mode
2010-02-15 by Chris
I been playing with DEXTD and it is pretty darn good for editing kits. I can t get it to acknowledge 2 way mode, though. It seems like it partially works as
What is the difference?
2010-02-14 by Keith Raper
We need Oldguydrummer to help here - I started with the DTXpress III. I know the DTXpress III had improved cymbal sounds over the II, but I don t know what
What is the difference?
2010-02-14 by Dustin T
Hello everyone, I was wondering if anyone can tell me the difference between the original DTXpress module and the DTXpress III module? Also, does anyone know
RE: DEXTD Part II
2010-02-10 by Chris
Disregard the previous post same subject... I installed DEXTD last night and believe it is way more feature rich that I previously understood..... I can post
Re: DEXTD
2010-02-10 by keith1200rs
... Hmm, you are right - sounds a bit marginal. Mine is a 1.66G Centrino Duo (whatever that is) but I can stick 2GB of memory in it, so it is probably worth a
Re: DEXTD
2010-02-10 by Chris
Keith, Yep, It s a 1.5 Celeron that will only take 1 Gb of RAM. I thought it could possibly squeak by if I power down all the unecessary processes. Then, of
Re: DEXTD
2010-02-09 by keith1200rs
... Chris, Is that because it is underpowered? If so, a memory upgrade may be enough to sort it out. When I get chance I will stick 2GB in mine & try it again.
DEXTD
2010-02-09 by Chris
I ve kinda given up thinking I can trigger samples real time with my old laptop so i think I may try tweaking the samples in the module. I see DEXTD is the
(no subject)
2010-02-09 by Tom Watson
You should also check the cable by pulling the cable out of the ride or crash(something you know works) and plugging it into the snare and hitting it... it
Re: Need help with tp65s(snare pad)
2010-02-09 by keith1200rs
George, Well it sounds like you have done the main diagnostic checks. The factory reset should have restored the input settings to 3 zone, but just to be
Need help with tp65s(snare pad)
2010-02-09 by george_rhythmasia
Hi, I have a dtxpress II drumkit. The problem is my tp65s snare pad, its 3-zone trigger does not work, (no sidestick & rimshot) -used a stereo jack for it
BFD2
2010-02-03 by keith1200rs
Chris, My laptop is a 1.66GHZ Centrino Duo T2300 with 500MB RAM. An email from sjdrummerboy suggested at least 2GB RAM and a dual core. I can certainly see
(no subject)
2010-02-03 by Chris Barnhart
Keith, Thanks for the report... what kind of specs does your laptop have? I did buy a usb midi cable but haven t unpackaged it yet. I wanted to make
Re: Software triggering
2010-02-03 by keith1200rs
Following other peoples suggestions I managed to download a demo of BFD2 and hook it up to my kit with the free ASIO drivers. Latency is not bad and the
Re: couple problems
2010-01-22 by CJ
Haha, yeah I took the advice and tried harmony-central. Lots of responses, no solutions yet.
RE: [DTXpress] Re: Software triggering
2010-01-21 by Jono W
The only real advantage is (arguably) that you can go 64 bit with windows 7, but windows XP is *mostly* 32 bit. This lets applications use more RAM - you re
Re: Software triggering
2010-01-21 by cbarnhart44
Thanks Jono! Exactly what I needed to clarify the confusion. I m torn now between the M audio card and usb cable (the m audio card is only marginally more
Re: couple problems
2010-01-21 by keith1200rs
... Glad it s now working. I cannot remember exactly what changes with live mode, but it is covered in the reference manual. ... Maybe Ruffalo2003 & Jono W
Re: couple problems
2010-01-21 by CJ
ahahaha! awesome keith, thanks a lot! I would ve never thought of that. I purposely set the volume mode to live... The way I understood things, it just made
Re: Software triggering
2010-01-21 by ruffalo2003
Use an m-audio card for this, they have good asio drivers. I use Ezdrummer for my sounds... Love the Nashville EZX. I ve got almost no latency and use this for
Re: MIDI and Software Kits
2010-01-21 by ruffalo2003
I m using an m-audio audiophile, midi cable and ezdrummer for this, works like a charm. Tom
Re: Software triggering
2010-01-21 by keith1200rs
... Thanks for chipping in with a reply here. I know little about MIDI and rarely use it but thought I would see what happens with what I had lying around. I
Re: couple problems
2010-01-21 by keith1200rs
... You re having a bad day, aren t you!? I think you have set your volume mode to live . That changes the operation of the volume controls. Page 30 of the
couple problems
2010-01-21 by CJ
As if the midi problems aren t giving me enough trouble, I ve got two new problems. I figured I d start a new topic just to make searches easier... Anyway, I
RE: [DTXpress] Re: Software triggering
2010-01-21 by Jono W
Hi Chris, I ve done this with my DTXtreme IIs, but it should be no different to what you want. In my case I used BFD2 as the drum samples/virtual
Re: Software triggering
2010-01-21 by keith1200rs
... Chris, I think you can do what you want, but you need someone other than me to tell you how! I just tried plugging my DTXpress into my laptop with a
Software triggering
2010-01-20 by Chris Barnhart
Hope this doesn t post twice. What do I need to trigger PC drum software from my DTX SPIII kit for live performance? Wanted more sounds. If done a bit
MIDI and Software Kits
2010-01-20 by cbarnhart44
Wanted to try a minimalist approach to triggering PC software samples from my DTXSPIII kit for live use to get more avaialble sounds. What do i need? MIDI
Re: Anyone still around? Midi help
2010-01-18 by keith1200rs
... Unfortunately I m not midi expert. Also, you have tried it on two computers with no luck which I would have thought would have eliminated a
Re: Digital drummer magazine
2010-01-18 by keith1200rs
... PFozz, I m glad you enjoyed it. I thought the mag was quite good, although I think it would be better to not have to register to get it. Some good stuff
Re: Anyone still around? Midi help
2010-01-18 by CJ
Anyone think of anything yet that I might be able to try? Maybe some type of settings within windows? This is killing me...
Re: Digital drummer magazine
2010-01-17 by phuzzyfozz
I sincerly enjoyed to read this article, Keith ;-) Thanks again for the kind words and this anthologic circuit! All the best to you and everyone in this group,
Digital drummer magazine
2010-01-16 by keith1200rs
There is a new, free edrum magazine you can download from here: http://www.digitaldrummermag.com/ Apart from an article about some boring guy in Yorkshire,
Re: PCY130S - Edge and Bell not working.
2010-01-13 by keith1200rs
Gary, I m glad it s sorted now. I can t remember what the ribbon connectors are like, but if they are a push fit (without a locking action) then I guess they
Re: PCY130S - Edge and Bell not working.
2010-01-13 by cntrymuziksngr
Thanks again Keith. I looked for cracked joints and didn t see any. I used a multimeter to check for continuity and it seemed fine. So, in desperation, I
Re: Anyone still around? Midi help
2010-01-12 by CJ
Yeah, I ve never used midi before now. I suppose it s possible that for one reason or another you could be correct... but no, I ve never used or tried using a