RE: [DTXpress] Re: Anyone still around? Midi help
2010-01-12 by Jono W
Sorry I can t remember the answer to this question from the previous e-mails (and am a little too busy to check) But have you had any other midi devices
Messages
Browse messages
Page 7 of 283 · 14139 messages matched
Re: Anyone still around? Midi help
2010-01-12 by keith1200rs
... I can only guess, but you could have a driver problem, or some other settings on the computer. I wonder if anyone else has any ideas about what you could
Re: Anyone still around? Midi help
2010-01-12 by CJ
... Got in the second cable last night. I didn t have a long time to test it, but I couldn t get either of the orange or green lights to come on. I kept
Re: PCY130S - Edge and Bell not working.
2010-01-10 by keith1200rs
Gary, It sounds like you have a bad connection in the cymbal. The piezo is connected to the connector tip. The bell and edge both connect to the ring, with one
Re: PCY130S - Edge and Bell not working.
2010-01-10 by cntrymuziksngr
Keith, Thanks for the advice. I will give that a shot. I did, however, already take the cymbal apart and clean the ribbon cables. It worked for a brief
Re: Anyone still around? Midi help
2010-01-09 by CJ
... Thanks again Keith. I guess i ll just have to wait for my new cable to come in and hopefully that ll fix my problem. For now i tried out the settings
Re: Anyone still around? Midi help
2010-01-09 by keith1200rs
... I cannot really help with the error message. It sounds like the program must have found a midi input device though, because if I leave mine unplugged I
Re: PCY130S - Edge and Bell not working.
2010-01-09 by keith1200rs
... Gary, Before taking it apart I would suggest a bit of swapping around to make sure it isn t the cable, module or trigger settings. It seems a little
Re: Anyone still around? Midi help
2010-01-09 by CJ
... Yeah, I double checked everything tonight. I have the same interface as you, same settings. Tried it on XP even though the cable says it works with Vista.
PCY130S - Edge and Bell not working.
2010-01-09 by cntrymuziksngr
I have a PCY150S that has stopped working. All three zones produce the ride. I have read other discussions about this and they all suggest opening the cymbol
Re: Trouble with RHH 130 hi-hat
2010-01-08 by b33m4n
I will look into that and get back to you. Thanks.
Re: Trouble with RHH 130 hi-hat
2010-01-08 by keith1200rs
... It could be faulty. Do you have a multimeter (or can you borrow one?). A resistance check would quickly sort out if it is faulty. Keith.
Re: Trouble with RHH 130 hi-hat
2010-01-08 by b33m4n
Still trying to find out how to get this RHH to work right. HH Offset did not fix it, and neither did a factory reset and setting the trigger to RHH. I ve
Re: Anyone still around? Midi help
2010-01-08 by keith1200rs
It sounds like your computer MIDI interface is the problem. My interface is like this: http://tinyurl.com/ycewv57 Works fine. I use XP. Keith.
Re: Anyone still around? Midi help
2010-01-08 by CJ
... I appreciate the help Keith. I bought the cable off ebay as well. When I searched online, everyone having trouble with this cable said they would get a it
Re: Anyone still around? Midi help
2010-01-08 by keith1200rs
It is difficult to know if your MIDI cable is faulty or if the drivers aren t loaded correctly without something else to check it on. I bought a cheap
Re: Anyone still around? Midi help
2010-01-07 by CJ
... I downloaded that midi monitor and i m still getting nothing. all I got was the program constantly freezing and having to be shut down, just like the
Re: Anyone still around? Midi help
2010-01-07 by keith1200rs
OK, try http://obds.free.fr/midimon/ for a midi monitor. You can try it for free. There are many others - I just searched on google & picked the first one.
Re: Anyone still around? Midi help
2010-01-07 by CJ
... Thanks a lot Keith! I ve searched everywhere I can on the internet, so I ve done most of the troubleshooting. I ve got the leads hooked up right, the
Re: Anyone still around? Midi help
2010-01-07 by keith1200rs
... I hope a more experienced MIDI person will chip in, but I will try my best! The MIDI in & out connections can be confusing (to me anyway) so they may be
Re: Trouble with RHH 130 hi-hat
2010-01-07 by keith1200rs
... Tom, Yes - I did a search on the problem and spotted your posts. I couldn t find anyone who had problems that weren t setup related. You could always back
Anyone still around? Midi help
2010-01-07 by CJ
Hey, if anyone s still around, I m in desperate need of help. All I want is to upload all these custom user kits to my DTxpress I. I have DTXchange and a
Re: Trouble with RHH 130 hi-hat
2010-01-06 by Tom Watson
Hi Keith I was one of the people having this problem... the dtx-I brain will fry it s self every so often...it s probably a ground problem. it does wierd
Re: Trouble with RHH 130 hi-hat
2010-01-05 by keith1200rs
This problem has cropped up before, but is usually because the modules default to a normal HH, even if you bought the Special kit. You could try a factory
Re: Trouble with RHH 130 hi-hat
2010-01-05 by b33m4n
Thanks for your reply, Keith. I have the DTXpress III Special kit which came with the RHH130. Both cables that are being used by the hi-hat are stereo and both
Re: Trouble with RHH 130 hi-hat
2010-01-05 by keith1200rs
... It would be useful to know which module you have. Also, have you just added the RHH or did it come with the kit? The RHH has two cables - one for the pad
Re: Trouble with RHH 130 hi-hat
2010-01-05 by b33m4n
I meant all I can get it the open sounds, not the closed sounds.
Trouble with RHH 130 hi-hat
2010-01-05 by b33m4n
Even though I ve got it set to SP Med and the pad is set to RHH , the only sounds that I can get from my hi-hat are the closed sounds. I ve taken the hi-hat
Re: Dtxpress IV module help
2010-01-04 by keith1200rs
... I have checked the manual now and you need to look at page 28 onwards - Assign Drum Voices . Keith.
Re: Dtxpress IV module help
2010-01-01 by keith1200rs
I don t have the DTXpress manual handy at the moment to be specific, but you need to edit the voice for that pad. You will need to do it for every kit you
Dtxpress IV module help
2010-01-01 by papote3
Hey people merry xmas, happy new year. I have a dtxpress 4 module but I have the dtxtreme IIs pads and for my life I can t configure the last tom to sound as a
DTXplorer kit for sale
2009-12-02 by Ron Benefield
Hi! I am going to be either selling my dtxplorer kit as whole or just the pads and keeping the module. Whichever someone is interested in. For the whole kit I
Re: pcy130s not working correctly
2009-11-30 by keith1200rs
OK, so the pad works and is wired correctly. I think the most likely problem is that the pad type is not set up correctly in the trigger menu. I am not
Re: pcy130s not working correctly
2009-11-30 by papote3
... sorry for that, ok the module is a dtxpress IV, i bought the pad used, its plugged to the crash input, i get 2 sounds on the edge i get a bell and on the
Re: pcy130s not working correctly
2009-11-30 by keith1200rs
... A bit more information would help: Is it a new pad? Has it worked in the past and just stopped working? Do you get two sounds from it (one when you hit the
pcy130s not working correctly
2009-11-30 by papote3
i have a pcy 130s and the choke function appears to not be working, can somebody help?? thanks
Re: adding midi to original dtxpress
2009-11-29 by keith1200rs
Jay, I am not aware of any DTXpress instructional videos on youtube but you could try searching. The manuals aren t great but you will have to persevere, and
Re: New - Yamaha DTX Multi 12
2009-11-29 by keith1200rs
Ron, I agree the Yamaha Multi12 is a lot better value than the Roland SPD, but in the UK it costs as much as a DTXpress kit. Maybe it is aimed at DTXtreme
adding midi to original dtxpress
2009-11-29 by jay
can someone please post a video to youtube describing step by step directions very simple: what buttons to push on brain, how to use the software to add
Re: [DTXpress] New - Yamaha DTX Multi 12
2009-11-29 by Ron Benefield
Keith, The new DTX Multi 12 has a whole bunch more features than the Roland SPD-S. For instance it has 1,024 sounds in it, it has 3 more pads, 5 trigger
Re: HH80 does not work on my original DTXpress
2009-11-23 by keith1200rs
Benedikt, I have never come across the HH80! Still, I have found out the difference between the HH80 & HH80A: The HH80 has a metal strap, the HH80a has a
HH80 does not work on my original DTXpress
2009-11-23 by benedikt.sieben
Hi everybody, I tried out a HH80 controller on my DTXpress module. Unfortunately it does not work. When I press the pedal down, no foot chick sound is
New - Yamaha DTX Multi 12
2009-11-20 by keith1200rs
Probably not of much interest to people on this group (maybe if it was half the price) but anyway, Yamaha have unveiled some competition for the Roland SPD-S.
RHP120's and KP120 price
2009-11-20 by uac235
Hello all, I need to sell a couple of RHP120 s and a KP120 (real head toms and kick). I searched online to get an idea of what to sell them for, but I
Re: When the lithium battery goes dead ?
2009-11-19 by keith1200rs
... By the way, all the DTX series (DTXplorer included) will display Battery Low when it is ... low, according to the manuals. Keith.
Re: When the lithium battery goes dead ?
2009-11-19 by keith1200rs
... You can download the manual - there is a link in the Links section here. As usual according to the manual: When the backup battery is running low, the
When the lithium battery goes dead ?
2009-11-19 by bigbearstyx
When the battery goes out in the control unit, can you change the battery and where would you find one ? What type ?(DTXplorer) I m sure its in my manual ~ but
Re: Roland CY-5 compatibility
2009-11-18 by Kurt
My cy-5 works great with my dtxtremeIII and the factory settings so I would think it s not going to be a problem.
Re: Roland CY-5 compatibility
2009-11-18 by Kurt
My CY-5 works great with default settings on my dtxtremeIII so I m assuming it will work just the same.
Re: Roland CY-5 compatibility
2009-11-18 by bigbearstyx
... Great~ Keith~ thats all I needed to know - stereo cable - HH brain should understand dual zone -- Ok Thxs.!