RE: [Digital BW] Re: 9600 for B&W & some potential options
2006-10-13 by John Moody
No, I did not find single RIP that equaled the Epson driver performance for the 2200. StudioPrint was not bad if you have to use something, but the M/LM and
Messages
Browse messages
Page 584 of 2186 · 109257 messages matched
Re: I gave up
2006-10-13 by Clayton Jones
Hi Stephane, ... You re welcome. I hope I didn t give the impression that I was saying my results are better than K7 inks. I was concerned that your remarks
Re: Epson K3 inks and Advanced B&W mode
2006-10-13 by Clayton Jones
Hello Cynthia, ... That would certainly change things . ... I have no explanation for it, but just from experimenting I found that VFA seems to work best
RE: [Digital BW] Re: 9600 for B&W & some potential options
2006-10-13 by Paul Roark
Greg, The 2200 is a likely candidate for a test bed for the full color + B&W approach. Are there CMYK rips that can deal with such? Any recommendations (cost
Re: 9600 for B&W & some potential options
2006-10-13 by Greg
... modern ... give me ... will ... the above ... I would suggest CMYK profiles and of course a RIP that will handle them properly. That also kind of
RE: [Digital BW] UT-3D Dark Magenta ... Green???
2006-10-13 by Paul Roark
That s normal. Paul www.PaulRoark.com _____ From: DigitalBlackandWhiteThePrint@yahoogroups.com
9600 for B&W & some potential options
2006-10-13 by Paul Roark
... To follow up on my earlier response on this as well as the tentative good news about the stability of my non-blended ink 7500 approach, here are some of
UT-3D Dark Magenta ... Green???
2006-10-13 by evanj1969
UT-3D Dark Magenta ... Green??? when applying the color test curve adjustment in PS http://www.inksupply.com/roarkslab.cfm (bottom of the page), or using the
Large Format 4K + LM & LC tone stable
2006-10-13 by Paul Roark
A quick look at the one week tone stability of what I m calling the 4K+ approach on my 7500 indicates the tones are very stable. I overlaid graphs of Lab A
Colour shift related to ink levels??
2006-10-13 by Steve Taylor
Anyone noticed this effect before? I have three printers – one a C86 with a combination of ENZ and EZW in it, an R220 with UT3D in it, and an R800 with Epson
Re: I gave up
2006-10-13 by stephane_bosman
Clayton, Thanks for your helpful input and glad for you you got better success than me with ABW. I would just like to mention that with NK7 you get different
Re: Epson K3 inks and Advanced B&W mode
2006-10-13 by cynthiam_in_fl
... I ... did ... to - ... to ... decied ... when ... All ... many ... is an ... previous ... settings ... sided ... Hi Clayton, I was hoping you would add
RE: [Digital BW] print sharpness lost -- WTF happened?
2006-10-13 by John Moody
Just a guess; run a nozzle check and look very carefully (with a loupe) for any nozzle(s) that may be spraying at an angle. Best regards, John Moody ... From:
RE: [Digital BW] Re: Eye-One Calibration Error
2006-10-13 by John Moody
I’m embarrassed to say that all I can remember is huge fits of swearing; and I’m a very easygoing person. I seem to recall that the problems were mostly
Re: [Digital BW] print sharpness lost -- WTF happened?
2006-10-13 by Stephen Petegorsky
David - have you run an alignment check on the printer? Stephen Petegorsky
print sharpness lost -- WTF happened?
2006-10-13 by David Keenan
I am printing from Photoshop CS2 v9.0.2 using Advanced Black & White to an Epson 2400 from large TIFF files onto the Innova F-type gloss paper. I have several
Getting coarser grain with black-only?
2006-10-13 by horstenj
Perhaps a strange question in an area where everyone, including myself, is usually striving for the smoothest print possible: what are the possibilities to get
[Digital BW] Re: I gave up
2006-10-13 by Clayton Jones
Hello Mbutler, ... LOL! Got a good chuckle from your remarks. ... I can load over 300gsm papers easily with the top feeder. It just requires getting a feel
RE: [Digital BW] Big OHP
2006-10-13 by Eric Neilsen
And add the floor space to that; An empty warehouse with space to splash would be nice. Eric Neilsen Photography 4101 Commerce Street Suite 9 Dallas, TX 75226
RE: [Digital BW] Big OHP
2006-10-13 by Eric Neilsen
Platinum is not like silver that allows for rough handling. I have seen a few large contact frames, but not that large. I have made them as big as 30x40 with
Re: I gave up
2006-10-13 by Clayton Jones
Hello Stephane, I agree with your observations, but would put different emphasis on them. ... Actually I find it very reliable. It definitely has the quirks
Re: Epson K3 inks and Advanced B&W mode
2006-10-13 by Clayton Jones
Hello Cynthia, ... This is probably my fault for not explaining some things better. All of the driver settings are relative to something else. There are many
Re: [Digital BW] Big OHP
2006-10-13 by Tom Baker
And don t forget that tray processing a print that sizx will require two people. So, at $50/hr per, that s...... Tom Baker john dean
Re: [Digital BW] Big OHP
2006-10-13 by john dean
Right, who cares about the trays. You can make em easily with plastic sheeting and some boards. But the platinum. Wo. That s gonna cost ya. Better have a
RE: [Digital BW] 9600 for B&W
2006-10-13 by Paul Roark
... In my 7600 I used MIS UT7. See http://home1.gte.net/res09aij/UT7-7600-Readme.htm Although I made a number of PS curves to control the inks with the Epson
RE: [Digital BW] Big OHP
2006-10-13 by T
Back in my black and white darkroom days, we made the overly large prints by making a trough and using plastic in the trough. See-sawing the prints. But, never
[Digital BW] Re: I gave up
2006-10-13 by mbutler355
... I, too, have had the r2400 for about a week, and I m getting this sinking feeling that it s too smart for me. It laughs when I try to feed thick paper
RE: [Digital BW] Big OHP
2006-10-13 by Tom Baker
But, for the right price (high) one could make the trays. And, contact print frames. And lights (ok, the sun). Tom Baker Eric Neilsen Photo
RE: [Digital BW] Big OHP
2006-10-13 by Eric Neilsen Photo
Who has trays that big? Eric Neilsen Photography 4101 Commerce Street, Suite 9 Dallas, TX 75226 214-827-8301 http://ericneilsenphotography.com Skype :
Re: Big OHP
2006-10-13 by mbutler355
... Hmmm, But you could sell the print for $25,000, right?
9600 for B&W
2006-10-13 by Steven Daniel
I have the opportunity to buy a used 9600 printer cheap. I have a 4800 and really like the K3 inks. I used to use a 2200 and don t want to go back to that
Big OHP
2006-10-12 by john dean
http://www.pictorico.com/category/3-OHP-Transparency-Film.htm Anyone want to make some 42 x 70 platinum prints? Got the cash? john
PremierImage Premium Photo Luster Paper
2006-10-12 by Bob Marsolais
Is anyone familiar with PremierImage Premium Photo Luster Paper? Is it acidic? I m looking for a good, cheap photo luster paper. Thanks
Re: [Digital BW] Eye-One Calibration Error
2006-10-12 by Michael King
Peter, I ve had a similar problem, finally got it solved by sending it back to Switzerland (after UK sent it back fixed twice and it wasn t). Are you 100% sure
Re: Eye-One Calibration Error
2006-10-12 by bwbonkers
Hi John Thanks for reply. USB power is a thought but why would it work for spot measurement and not for chart measurement. I have had the Eye-One for about 18
RE: [Digital BW] Eye-One Calibration Error
2006-10-12 by John Moody
The i1 needs more power than my USB port seemed to deliver; it would not always work. After adding a hub with an external power supply to power the USB bus,
Eye-One Calibration Error
2006-10-12 by bwbonkers
I know this is a little off topic but I mainly use my Eye-One for creating BW profiles so I hope no one objects to this post. I keep getting a calibration
[Digital BW] Re: I gave up
2006-10-12 by cynthiam_in_fl
I ve only had the r2400 alittle over a week so the jury is stil out. Color is beautiful but B&W seems to bit a bit more trial and error but I think you will
RE: [Digital BW] Re: I gave up
2006-10-12 by Alan Kearney
I must have picked up this thread mid stream, because I don t know which printer you re talking about and I m in the market to buy a new printer, probably
QuadToneRIP release 2.4.3 -- Mac and PC
2006-10-12 by Roy Harrington
A new version of QTR is now available for both Mac & PC. The main additions for this release are some changes in the Piezography K7 inkset. With the
Re: I gave up
2006-10-12 by stephane_bosman
I found ABW to be unreliable, needing slightly different adjustments depending on the pictures. I also found it not completely immune to metamerism and not
Re: B&W with the R1800
2006-10-12 by Andre Moreau
... Steve, This is very good timing for me as I need to replace my 1160s. I d be very much interested in the readme file. TIA, Andre
Re: Clogs
2006-10-12 by Greg
... heavy use, ... if it ... Better idea would be to keep it clean. Use lots of good cleaner, the Image Specialists WJ800 works well for this, but don t leave
Re: Epson K3 inks and Advanced B&W mode
2006-10-12 by cynthiam_in_fl
I ve been to the site and reviewed the materials. But unless if I missed something, he suggests using Velvet Fine Art as the media type for all matte papers??
Re: Epson K3 inks and Advanced B&W mode
2006-10-12 by bwinkjet
Hi, Try this website by one of our members. http://www.cjcom.net/digiprnarts.htm Paul ... Matte,
Clogs
2006-10-11 by Paul Roark
I d earlier thought that my Epson R220 has been clogged by the use of Glop as a base for dilution. It now turns out that may have been a coincidence. The
Epson 2400, K3 inks, CSR, and Bowhaus RIP
2006-10-11 by mxgo95747
I been using the Bowhaus RIP with K3 inks on CSR paper. Bowhaus has two profiles for this paper: neutral (using pK, LLK, LK, LC, and LM) and tritone (Pk, LK,
Re: Strange R2400 nozzle check--update
2006-10-11 by Thomas Keesling
Thanks for the suggestion, John. I had checked that after letting the printer sit overnight and saw no indication of the EZW-Y having leaked. The problem
Epson K3 inks and Advanced B&W mode
2006-10-11 by cynthiam_in_fl
This my my first post in this group. I have been lurking and receiving the digest for awhile, but now it s time to take the plunge. I just started using an
Re: [Digital BW] B&W with the R1800
2006-10-11 by studio9chik
i use the r1800 with jon cone s k7 inks. smooth and rich. plus, the money saved by purchasing the 1800 vs 2400 means more $ for paper + inks.