Yahoo Groups archive
Messages
Page 334 of 564 · 28179 messages matched
2006-10-15 by Julian
What about just finding a 9v regulator, and cutting down the 12v supply that way for the modules that need only 9v? Thats all the doepfer 5v adapter does... You would probably need to do it on a per-module basis thoug - the bus has a rail reserved for 5v, but obviously not a coup
2006-10-15 by Paul Schmidt
Boss effect stomp boxes? > > wrote: > > > > Hello there, I was wondering if anyone knew if it > would be possible to > adapt the PSU2 power supply to output +9v and -9v > rather than + and - > 12v, maybe this is possible by changing some components? > Or does anyone > know of a w
2006-10-15 by Paul Schmidt
Here is an idea, put a video output on the module > so when you are playing a show you can put the video > feed of the ocilloscope into the house video system. > Its good to get all these ideas out in the early planning > stages ;) > > wrote: > > > > exactly! and useful. > best r
2006-10-15 by thebadproducer
Hello there, I was wondering if anyone knew if it would be possible to adapt the PSU2 power supply to output +9v and -9v rather than + and - 12v, maybe this is possible by changing some components? Or does anyone know of a way of incorporating diy 9v modules into the Doepfer powe
2006-10-15 by Bakis Sirros
exactly! and useful. best regards, bakis. --- Richard wrote: > of course an oscilloscope is not "necessary": but it > could be "fascinating" > > R > > > ----- Original Message ----- > From: n2eil > To: Doepfer_a100@yahoogroups.com > Sent: Friday, October 13, 2006 11:53 PM > Subje
2006-10-15 by Richard
of course an oscilloscope is not "necessary": but it could be "fascinating" R ----- Original Message ----- From: n2eil To: Doepfer_a100@yahoogroups.com Sent: Friday, October 13, 2006 11:53 PM Subject: [Doepfer_a100] Re: A-100 oscilloscope module It looks like it's single trace; a
2006-10-15 by credo99muro
Hello !! When I record music, LED's or other signal level indicators are very useful by analogue as well as digital. Meanwhile it is said Analogue Modular Synthesizers such as "MOOG Systems" and "A-100" are originally instruments without them.This oscilloscope module issue is whe
2006-10-15 by damon
can you imagine if tom dowd never used a level meter?! On Oct 14, 2006, at 4:48 PM, credo99muro wrote: > Hello !! Is it really necessary for "A-100" to implement such an > oscilloscope module ? > Shall we listen to the sound of some oscillators of "A-100". A > musician must have
2006-10-15 by amnesia
Whilst I appreciate your response. I sent Jesus an email not 10 minutes after he sent his first email stating he wanted to sell stuff over 24 hours ago today we get more emails saying he is selling stuff... I am sure he is a great guy and I have seen his name on the list for ages
2006-10-15 by Jay
credo99muro wrote: > Hello !! Is it really necessary for "A-100" to implement such an oscilloscope module ? > Shall we listen to the sound of some oscillators of "A-100". A musician must have an ear > for a fine sound with his(her) keener artistic sense. Can you imagine as if Wol
2006-10-14 by credo99muro
Hello !! Is it really necessary for "A-100" to implement such an oscilloscope module ? Shall we listen to the sound of some oscillators of "A-100". A musician must have an ear for a fine sound with his(her) keener artistic sense. Can you imagine as if Wolfgang Amadeus Mozart woul
2006-10-14 by damon
I wouldn't jump the gun so quick on that, cuari's been around forever and is a very reliable fellow. Patience. Not everyone is in front of email all of the time, we don't all sit on our mailboxes all day and night (I check maybe once a day, twice perhaps). On Oct 14, 2006, at 1:4
2006-10-14 by amnesia
Its amazing that you can flood 7 synth forums with stuff you want to sell but you cant reply to an email ??? cuari7 wrote: > > Mint condition. Want $400 plus s/h. Ship only in USA. > > Email me or call me: > > diazdotjesusatmayodotedu > > cell # 904-537-7876 > > JDiaz > >
2006-10-14 by cuari7
Mint condition. Want $400 plus s/h. Ship only in USA. Email me or call me: diazdotjesusatmayodotedu cell # 904-537-7876 JDiaz
2006-10-13 by n2eil
It looks like it's single trace; a dual trace scope would be a lot more useful. Plus, I'm partial to my analog scope. We _do_ like analog here, right? -n
2006-10-13 by Ross Goniakowski
this will give you 5 from 1, it may help...new from Plan B: http://www.ear-group.net/model_1.html Richard wrote: I seem to have spent a lot of money of doepfer modules and so have run out of sockets on my PSU. My PSU has plenty of output to spare so does anyone know of a UK sourc
2006-10-13 by achtung_999
Thanks for the answer Dieter. I will mail Christian soon with some questions. I am also not a software specialist.. I'm just an ideasman, my friend is the designer/builder/programmer. Thanks a lot for giving me some hope for that A195 ;-) > You've got me there! I'm not the softwa
2006-10-13 by Richard
Could such an oscilloscope be used to capture an image of one off events like a triggered envelope or would it just be useful for waveshapes, LFOs etc? Richard ----- Original Message ----- From: Bakis Sirros To: Doepfer_a100@yahoogroups.com Sent: Friday, October 13, 2006 1:11 PM
2006-10-13 by Richard
I seem to have spent a lot of money of doepfer modules and so have run out of sockets on my PSU. My PSU has plenty of output to spare so does anyone know of a UK source for jumper cables which would allow me to run multiple modules from one socket? I couldn't find such a thing on
2006-10-13 by Jay
Bryan E Cornell wrote: > Would it be possible to have an on/off switch for the module so that > when you are not using it, it doesn't suck up the 300mA? I'd rather have it off the power supply to begin with. Who knows what noise it will introduce to it. Power jack on the front pa
2006-10-13 by Bryan E Cornell
Would it be possible to have an on/off switch for the module so that when you are not using it, it doesn't suck up the 300mA? Bryan >>> synth_freak_2000@yahoo.com 10/13/06 8:11 AM >>> hello dieter, that's a great idea! i would buy such a module for sure! and i am also sure that i
2006-10-13 by credo99muro
Hello !! Once upon a time, I learned "Max/MSP"(http://www.cycling74.com/products/ maxmsp). It is a graphical environment-software for music, audio, and multimedia on Macintosh and Windows PC. "Max/MSP" is the virtual instrument, meanwhile the Modular Synthesizer like an "A-100" i
2006-10-13 by hardware@doepfer.de
> Then a few questions for Dieter.. This OEM board. Will this be a midi > interface or a HID device? What will be the resulting data in the > computer? Will it be full 8 bit (so not like midi 7bit + control bit) You've got me there! I'm not the software specialist and don't know
2006-10-13 by David Salter
Excellent Dieter, I'll take one, kit or prebuilt. David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com -----Original Message----- From: Doepfer_a10
2006-10-13 by Bakis Sirros
hello dieter, that's a great idea! i would buy such a module for sure! and i am also sure that i would prefer the complete module to buy from you, so i do not have to solder anything, just to mount the complete module to my doepfer racks! i'll create the poll, asap! many thanks,
2006-10-13 by achtung_999
John, In principle it will work with any software that accepts HID devices (joysticks, gamecontrollers etc.). So in theory you could be playing a videogame controlled with your Doepfer ;-) Unfortunately I don't know any other musicsoftware besides the 2 previously mentioned piece
2006-10-13 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like Doepfer to release an LCD Oscilloscope Module, and, if yes, in what "format"? [detailed info regarding the module from doepfer: The Belgium manufacturer Velleman has available an LCD osc
2006-10-13 by hardware@doepfer.de
David, yes. That's our plan: an miniature multiple (probably three or four, same as for the A-197). One socket for the cable leading to the scope, the remaining two or three for the A-100 patches. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@
2006-10-13 by amnesia
I will buy one :-) hardware@doepfer.de wrote: > > For all users who have been asking for an A-100 oscilloscope maybe we > found > a solution. The Belgium manufacturer Velleman has available an LCD > oscilloscope module VPS10 that will fit into the A-100 frame (even > suitcase > v
2006-10-13 by David Salter
Dieter, I do like the idea. I assume that the panel kit would have 3.5mm sockets (small multiple) and a cable to the scope input so that the scope can sit within the signal path rather than have a scope probe with a 3.5 jack on the end? Thanks David David Salter Senior Consultant
2006-10-13 by hardware@doepfer.de
I have to correct my own message. Christian Assall told me that even our board has a 10 bit ADC available and it will depend upon the software if only 7 bit (midi standard) or 10 bit are used. Next week I'll have the first pictures available. But we will offer it as an OEM board
2006-10-13 by hardware@doepfer.de
For all users who have been asking for an A-100 oscilloscope maybe we found a solution. The Belgium manufacturer Velleman has available an LCD oscilloscope module VPS10 that will fit into the A-100 frame (even suitcase version). Details can be found here: http://www.vellemanusa.c
2006-10-12 by Ross Goniakowski
good luck with your "marble statue" credo99muro wrote: Hello !! I appreciate your kind advice gratefully. I'm going to purchase "A-100 BS/2" and "R2M" as a ribbon controller by Doepfer here in Japan. I don't know why the keyboard was attached to the synthesizer like a "mini MOOG"
2006-10-12 by credo99muro
Hello !! I appreciate your kind advice gratefully. I'm going to purchase "A-100 BS/2" and "R2M" as a ribbon controller by Doepfer here in Japan. I don't know why the keyboard was attached to the synthesizer like a "mini MOOG" ? The keyboard comes from classical music in the west.
2006-10-12 by inform3r@optonline.net
Hi Ernst, This seems really innovative, but is it solely for use with Supercollider & Max/MSP? I initially thought of it as a great way to record and store CV¹s to create almost like a ³CV Bank² for my modular. I¹m not a Max/MSP guy(at least not yet) so can you elaborate on uses
2006-10-12 by Richard
for 60 euros I'd buy one for sure! Richard._,___ [Non-text portions of this message have been removed]
2006-10-12 by achtung_999
Thanks for the positive feedback already! I just had my friend on the phone. And we like to clear up some things. Like I answered to Chris: The actual samplerate of this device will be about 100/110 hz which, so I am told, results in having 50 hz as the max input frequency for co
2006-10-12 by Zoran Bosnjak
Hi, >I succumbed to the tempting offer of a Jupiter 8, So would I :-) >I have a fairly new Euro-rack system, with two Plan B Model 15 >oscillators, one Triple LPG (not Dual, guys, TRIPLE. Peter has only >made a handful of these guys. The only other one I know of belongs >to Aless
2006-10-12 by hardware@doepfer.de
We are also prototyping a similar OEM board with 64 inputs but 8 bit resolution only (USB and Midi, USB powered or powered by a standard wall outlet power supply if USB is not connected). Estimated release date: early 2007. Best wishes Dieter Doepfer > -----Ursprüngliche Nachrich
2006-10-12 by deepelement
in all honesty, this is an amazing idea and make performances/recording so versatile. keep us updated! --- In Doepfer_a100@yahoogroups.com, "selfoscillate" wrote: > > > this sounds like a very cool idea. > > best wishes > > ingo > > > > --- In Doepfer_a100@yahoogroups.com, "achtu
2006-10-12 by Soy Sos
Very cool, it will give me more of a reason to properly learn Max/MSP Soy Sos 412.371.4878 studio 412.608.5152 mobile http://tuffsoundrecording.com http://somamestizo.com 3 Generations Walking MKL vs Soy Sos http://www.lion1music.com/ _____________________________________________
2006-10-12 by David Salter
Ernst That sounds interesting, keep us posted. Rgds David David Salter Senior Consultant PSG Reuters Messaging: david.salter.reuters.com@reuters.net (t) +44 (0)20 7542 2402 | (m) 07990562402 | (f) 52699 Get the latest news at Reuters.com ________________________________ From: Doe
2006-10-12 by achtung_999
May I complete off topic add that I really like your music Thighpaulsandra! Greetings, Ernst On 10/12/06, laryn91 wrote: > > > > > > > If I remember correctly, the 2nd edition is mostly an update (plus > some new stuff) of the 1st edition (currently I only have the 2nd > edition)
2006-10-12 by selfoscillate
this sounds like a very cool idea. best wishes ingo --- In Doepfer_a100@yahoogroups.com, "achtung_999" wrote: > > Hello group, > > I haven't been visiting here for a long time. > A lot has happened I see! good! > > A friend of mine is building a module that will be able to conver
2006-10-12 by cuari7
I succumbed to the tempting offer of a Jupiter 8, so now I am forced to balance out my studio gear (or else my wife will evict me!). I have a fairly new Euro-rack system, with two Plan B Model 15 oscillators, one Triple LPG (not Dual, guys, TRIPLE. Peter has only made a handful o
2006-10-12 by achtung_999
Hello group, I haven't been visiting here for a long time. A lot has happened I see! good! A friend of mine is building a module that will be able to convert Doepfer (and other cv sources) to be converted to the computer via a simple HID device. The connection for this will be vi
2006-10-12 by Richard
the download is on this site somewhere:www.mhhe.com/primis/online its an adventure! good luck Richard Hi Richard, can you send me the link for the Alan Strange manual? Thank you, William Richard wrote: Hi Can anyone give me practical examples of how this module might be used? I h
2006-10-12 by William Soraparu
Hi Richard, can you send me the link for the Alan Strange manual? Thank you, William Richard wrote: Hi Can anyone give me practical examples of how this module might be used? I have A-149.1 and 2 and A-160 and A-161 already in the system Richard [Non-text portions of this message
2006-10-12 by laryn91
If I remember correctly, the 2nd edition is mostly an update (plus some new stuff) of the 1st edition (currently I only have the 2nd edition). I think the second is also a different publisher (wasn't the 1st some college press?). Don't know why Vogel's name was removed later (or
2006-10-12 by Richard
thanks Scott - and that's some pretty severe music you've got there! Richard ----- Original Message ----- From: nakedintruder To: Doepfer_a100@yahoogroups.com Sent: Wednesday, October 11, 2006 7:53 PM Subject: [Doepfer_a100] Re: A-166 logic module --- In Doepfer_a100@yahoogroups.