Yahoo Groups archive
Messages
Page 347 of 564 · 28179 messages matched
2006-07-08 by Doepfer_a100@yahoogroups.com
The following Doepfer_a100 poll is now closed. Here are the final results: POLL QUESTION: Would you like Doepfer to release a 5.1 Surround Voltage Controlled Mixer? (separate vcas for all 5 outputs and cv controlled 360 degree panning which could possibly be hooked up to the joys
2006-07-07 by hardware@doepfer.de
Before we continue this endless theoretical discussion .... Simply connect the A-100 output to your mixer/amplifier/soundcard ... I've never heard during the last 10 years of any problem with the A-100 impedance. And there is not "the A-100 impedance" as each module is different.
2006-07-07 by Florian Anwander
Hi bouyakaboy wrote: > The problem is not the cable length but the impedance matching ! Thats what I tried to explain: with a normal synth there is no problem with impedance matching. > So, the output impedance of a A-100 VCA or mixer seem's to be 10Kohm, > and it's pretty hight.
2006-07-07 by Josue Arias
Hi dieter, Its really the A-100 such high impedance? I mean 10k output impedance... In reality sometimes the specifications of gear specified the impedance the output want to "see" ie. the input impedance of the next gear in the chain, not the actual output impedance. For example
2006-07-07 by hardware@doepfer.de
The main problem is in this case not the impedance but the audio level. Output levels of electric guitars, basses or microphones are in the mV range (i.e. 1/1000 V) and the impedance is in the MOhm range. The levels of the A-100 are in the Volt range and the A-100 modules have lo
2006-07-07 by untiedstates
hmm.. mine don't work connected directly - they're SOny MDR-V6's with an impedance of 75 ohms and I figured there was an impedance issue or something. Maybe I'm wrong. WHen I connected my headphones what I heard was distorted even with lower levels. --- In Doepfer_a100@yahoogroup
2006-07-07 by klinic2
Hi Dieter, Its really the A-100 such high impedance? I mean 10k output impedance... In reality sometimes the specifications of gear specified the impedance the output want to "see" ie. the input impedance of the next gear in the chain, not the actual output impedance. For example
2006-07-07 by bouyakaboy
The problem is not the cable length but the impedance matching ! Have you ever try to plug a bass or a guitar directly into a "line in" soundcard or a mixing console ??? The song is awful because the output impedance of these intruments is very hight (Mega Ohm) ! Even with a 2 or
2006-07-07 by hardware@doepfer.de
I don't expect any problems with your applications. As long as the voltages applied to any socket are within -12V...+12V we guarantee that nothing can be damaged within the A-100. But even voltages beyond these limits will not damage most of the inputs (e.g. audio inputs and CV i
2006-07-07 by Florian Anwander
Hi > Nobody try to record is A-100 with a sound card and use DI ??? Nobody answered, because nobody had the idea to do so. ;-) A DI-Box is not necessary (but of course not wrong) for line outs of usual synths as long as the connection between the synth and the input of the mixing
2006-07-07 by Korhan Erel
Hi, I just plug my headphones (minijack) into any output jack and it works! Korhan On 7/7/06, untiedstates wrote: > > What's the simplest and most direct way to connect headphones without > using a mixer or a headphone amp module? > > Would it be as easy as making an adapter with
2006-07-06 by untiedstates
What's the simplest and most direct way to connect headphones without using a mixer or a headphone amp module? Would it be as easy as making an adapter with a resistor in it? I want to just plug in to the A-138 mixer, for example. thanks, Bryan
2006-07-06 by redsawcloud
Would it be dangerous to take an external 1/4" synth output directly into a VCA and adjust the volume to Doepfer signal level? Or to use a 4096 sqaure oscillator running on a 9v battery as a trigger source for an adsr? What are the risks in bringing in external signals both for a
2006-07-06 by Bakis Sirros
hello, i have never needed to add anything between my a100 and my soundcard. best regards, Bakis. --- bouyakaboy wrote: > Nobody try to record is A-100 with a sound card and > use DI ??? > > > --- In Doepfer_a100@yahoogroups.com, "bouyakaboy" > wrote: > > > > Hi all, > > I will r
2006-07-06 by bouyakaboy
Nobody try to record is A-100 with a sound card and use DI ??? --- In Doepfer_a100@yahoogroups.com, "bouyakaboy" wrote: > > Hi all, > I will receive soon my A-100 (just wait doepfer shippin-:) and I have > a RME fireface 800 soundcard. > > My question is about the best way to rec
2006-07-06 by Florian Anwander
Hi Bakis > but, keep in mind that new members are added in an > almost daily basis, so making a poll two months long > gives the opportunity to about 50 more members to vote > in a particular poll. Ok, I'll keep in mind for the future Florian
2006-07-06 by Bakis Sirros
hello florian, ok, no problem at all. but, keep in mind that new members are added in an almost daily basis, so making a poll two months long gives the opportunity to about 50 more members to vote in a particular poll. but, anyway, it's ok. best regards, Bakis. --- Florian Anwand
2006-07-06 by Florian Anwander
Hi Bakis > thanks for creating the poll. actually, i was > intending to create it during one of these days... > but why did you gave it a duration of only 2 weeks? > best regards, To be honest. To my experience topics fade away from the center of interest after one week. At least
2006-07-06 by selfoscillate
--- In Doepfer_a100@yahoogroups.com, davevosh@... wrote: > > > In a message dated 7/4/2006 11:00:10 PM Pacific Standard Time, > synaptic_music@... writes: > > > > > hello dave, > > i have both doepfer and blacet, but each in their own > frames with their own psu's. i haven't trie
2006-07-05 by Bakis Sirros
hello florian, thanks for creating the poll. actually, i was intending to create it during one of these days... but why did you gave it a duration of only 2 weeks? best regards, Bakis. --- Florian Anwander wrote: > Hi Bakis, > > here comes my description for the poll. Compared to
2006-07-05 by Bakis Sirros
ok, so, another new poll is coming... best regards, Bakis. --- hardware@doepfer.de wrote: > Bakis, > > this feature is not planned for the AD/DA module so > far and even not > possible as the AD/DA module has two high precision > outputs only. > > Best wishes > Dieter Doepfer > >
2006-07-05 by davevosh@aol.com
In a message dated 7/4/2006 11:00:10 PM Pacific Standard Time, synaptic_music@yahoo.com writes: hello dave, i have both doepfer and blacet, but each in their own frames with their own psu's. i haven't tried to power a miniwave with a 12 volts psu, but i guess that it is possible,
2006-07-05 by hardware@doepfer.de
How about a defective 35 years old vocoder prototype used by Kraftwerk for AUTOBAHN: Ebay # 300001522431 only US$ 8500 at the moment .... Best wishes Dieter Doepfer
2006-07-05 by hardware@doepfer.de
Bakis, this feature is not planned for the AD/DA module so far and even not possible as the AD/DA module has two high precision outputs only. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]
2006-07-05 by bouyakaboy
Hi all, I will receive soon my A-100 (just wait doepfer shippin-:) and I have a RME fireface 800 soundcard. My question is about the best way to record the A-100 in my computer with the fireface. Does I will need a DI Box to adapt impedance of a A-100 patch ? or not ? what is the
2006-07-05 by Bakis Sirros
i agree with florian regarding the 303-style keyboard. regards, Bakis. --- Florian Anwander wrote: > Hi > > > ok. but for the size of it, I would rather see > presets where you > > could d*g*t*ll* enter the chord m / M etc etc and > the base note. I am > > just concerned of the w
2006-07-05 by Florian Anwander
Hi > ok. but for the size of it, I would rather see presets where you > could d*g*t*ll* enter the chord m / M etc etc and the base note. I am > just concerned of the width of such a module. I would rather have it > that way than a vertical keyboard with pushbuttons (puke) Are you
2006-07-05 by selfoscillate
hello dave, i have both doepfer and blacet, but each in their own frames with their own psu's. i haven't tried to power a miniwave with a 12 volts psu, but i guess that it is possible, of course only with some changes on the module pcb. the miniwave works very well together with
2006-07-05 by phil hendricks
On Jul 4, 2006, at 7:35 PM, erase wrote: > is this some phase chorus pseudo stereo effect? http://www.tcelectronic.com/TC1210
2006-07-05 by erase
is this some phase chorus pseudo stereo effect? d On 5 jul 2006, at 03.34, p.hendricks wrote: > a mono to stereo bbd? > what about a mono to stereo bbd module? like the Electro-Harmonix > Ambitron > or the TC Electronics 1210? > > I recently sold my EH ambitron but really miss th
2006-07-05 by erase
ok. but for the size of it, I would rather see presets where you could d*g*t*ll* enter the chord m / M etc etc and the base note. I am just concerned of the width of such a module. I would rather have it that way than a vertical keyboard with pushbuttons (puke) d On 4 jul 2006, a
2006-07-05 by p.hendricks
a mono to stereo bbd? what about a mono to stereo bbd module? like the Electro-Harmonix Ambitron or the TC Electronics 1210? I recently sold my EH ambitron but really miss this effect? would this become too expensive? or was the TC 1210 just really overpriced? The simple EH ambit
2006-07-04 by Bakis Sirros
hello dieter, should i create a new poll about such a module described below? or this will be one of the jobs of the AD/D module? best regards, Bakis. --- Anton Coops wrote: > Hi Bakis, > > Don't know if you still accept new idea's for > modules, but just in case: > > simple patc
2006-07-04 by Richard
I'd be very interested in this ability to sweep through partials in a module as well! Richard ----- Original Message ----- From: izimizam To: Doepfer_a100@yahoogroups.com Sent: Tuesday, July 04, 2006 4:01 PM Subject: [Doepfer_a100] RE:additive osc module. I didnt notice this modu
2006-07-04 by Richard
I'd be very interested in this ability to sweep through partials in a module as well! Richard ----- Original Message ----- From: izimizam To: Doepfer_a100@yahoogroups.com Sent: Tuesday, July 04, 2006 4:01 PM Subject: [Doepfer_a100] RE:additive osc module. I didnt notice this modu
2006-07-04 by davevosh@aol.com
In a message dated 7/4/2006 8:01:54 AM Pacific Standard Time, izimizam@yahoo.co.uk writes: i see what a your saying dave , it does need to go alot further than the A112 which i havent tried but sounds cool.I best try the A112 anyway as i like the sound of it ! I'm interested to k
2006-07-04 by q v s f u e k p s v h s l w
i see what a your saying dave , it does need to go alot further than the A112 which i havent tried but sounds cool.I best try the A112 anyway as i like the sound of it ! I'm interested to know if anyone here uses the blacet wavetable Vco in a doepfer system and how easy it was to
2006-07-04 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Should Doepfer make a module that features the conversion between voltage based gate signals and switched keycontrol connections. General purpose: interface switched gear (like some Moog and Korg synth
2006-07-04 by ilanode
Hi, I have both Doepfer racks and FracRaks. Though you can run some modules designed for +/-15V on +/-12V I never tried it myself. Ever since I used a 2nd hand Power One psu. A PAiA FracRak plus a used psu should be more economical than forcing Blacet modules into a more costly E
2006-07-04 by izimizam
I didnt notice this module proposed ! did anyone try the K5000 range ? harmonic waterfall type sounds ? ability to sweep the partials like the K5000 would be great.Not 100% sure how this was implemented on the K5000.
2006-07-04 by davevosh@aol.com
In a message dated 7/4/2006 1:48:49 AM Pacific Standard Time, izimizam@yahoo.co.uk writes: Surely there is loads of potential for more exotic modules like this or a decent sampling/user loadable wavetable vector module .I wonder what possible modules this idea is diverting attent
2006-07-04 by Bakis Sirros
hello list, there are MANY open polls about possible forthcoming a100 modules.(some of these polls are closing in just a few days!) please take a minutes and vote for them. these polls define the future a100 modules and your module wishes could probably come true if you just vote
2006-07-04 by Florian Anwander
Hi > but this chord info, where would that be taken from ? midi? maybe > presets rather and offsetting the basic note with a cv instead As written: "MIDI" or "built in minikeyboard". Presets are not neccessary: You press once the chord on the mini keyboard, give a hold-informatio
2006-07-04 by erase
but this chord info, where would that be taken from ? midi? maybe presets rather and offsetting the basic note with a cv instead d On 4 jul 2006, at 12.58, levka0 wrote: > Hi Florian, > This is really a nice concept ! > > > --- In Doepfer_a100@yahoogroups.com, Florian Anwander >
2006-07-04 by Tommy DOG
--- In Doepfer_a100@yahoogroups.com, davevosh@... wrote: > i *am not* opposed to a wavetable vco,i just want to be sure that it > differentiates itself from whats already available. I have to agree, although I believe that because this module has been prototyped it would be easie
2006-07-04 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Would you like Doepfer to release a VC Arpeggiator module? (This module produces a CV-sequence on its output which is derived from a chord information at its input. Corresponding Gate-Outs are produced
2006-07-04 by levka0
As I have approached this over the past years, there are three types of options: (in order of complexity) 1) simple and relatively inexpensive: Get e.g. a Novation A-station, KS-rack or any other VA module and feed its raw unfiltered VCO signal into a single Doepfer VCF + VCA mod
2006-07-04 by levka0
Hi Florian, This is really a nice concept ! --- In Doepfer_a100@yahoogroups.com, Florian Anwander wrote: > > Hi Bakis, > > here is my suggestion for the arpeggiator. Levka did a good start. So > let me extend this: > > The basic functions: > ==================== > This module pro
2006-07-04 by q v s f u e k p s v h s l w
well the reason i mentioned wavetable vco was basically as i wanted the features of the blacet wavetable vco in a doepfer unit but with the ability to load it up with more waveforms or rom chips .I also liked the idea of a ' ppg ' vco with all the wavetables from the ppg (which h
2006-07-04 by Bakis Sirros
i want two! Bakis. --- selfoscillate wrote: > > hello dave, > > the answer to your question is yes and no :-) > > if doepfer will develop a wavetable module, then it > will have new features unavailable on other modules. > i'm pretty sure that there are lots of users who > would