Yahoo Groups archive
Messages
Page 541 of 564 · 28179 messages matched
2002-03-01 by bakis Sirros
hi joe, i have two A138a mixers,but i must confess that i use the a138a/b for the same job,both of them.i mean if i need cv signal mixing,or audio signal mixing i use either of them.i think that, many times i needed cv signal mixing and i have,also, used an A138b for the job... s
2002-03-01 by bakis Sirros
thank you RM!!,i hope your friend gets well... bakis. --- ringmod45 wrote: > hi bakis, thanks for the encouragement. it was late > at night after a 13 hour work day plus > a 2 hour visit to the hospital to bring food and > company for a friend who is going to > have major surgery
2002-03-01 by bakis Sirros
hi andreas, ....the only modules that have a rather big possibility of being released are the vactrol phaser/filter and of course ,the sensor keyboard(99% possibility) and the ribbon controller(99%). i ,also,would like to see these two modules( that you mentioned) released. o...,
2002-03-01 by bakis Sirros
hi florian, thanks for letting us know...at least ,he will be remembered by his contribution to electronic music(trautonium)... synthfreak --- Florian Anwander wrote: > Hello, > > I think this information is on interest in this > group. I read it today in > the morning in my news
2002-03-01 by ringmod45
hi bakis, thanks for the encouragement. it was late at night after a 13 hour work day plus a 2 hour visit to the hospital to bring food and company for a friend who is going to have major surgery tomorrow. i began to see the letters to move on the screen. i put a lot of thought a
2002-03-01 by Andreas Lindholm
I agree with Florian, we have to many immature polls. That is polls that would have been more precise if we had narrowed it down by some debate first. Now to the offset generator. I may be a little wrong here, but I don't see much that the vocoder module three can't do. Further m
2002-03-01 by buechlerjoe
>i need the 138 for other things in a patch This brings up a topic that seems worth discussing. When I was starting my system and reading up on the A100, the general consensus I saw was that the A138a was an important module in an A100 system, and that, like A118's, one needed "p
2002-03-01 by Florian Anwander
Hello, I think this information is on interest in this group. I read it today in the morning in my newspaper: Oskar Sala died last week in Berlin The short article in the Sueddeutsche Zeitung can be read here: http://www.sueddeutsche.de/aktuell/sz/artikel128023.php Florian -- Flo
2002-03-01 by Florian Anwander
Hi Bakis > very interesting...that means another poll... Please don't always do a poll immediately. I think we should discuss here wether something is making sense or not. When we have reduced the discussion to two or three possible choices, then we should start a poll. Only in I
2002-03-01 by bakis Sirros
hi florian, very interesting...that means another poll... bakis. --- Florian Anwander wrote: > Hi martin > > > Is it just me and Florian who like to see this > module in production, > > i want some feedback please, maybe even a poll > created on the subject. > I have to admit, th
2002-03-01 by bakis Sirros
hi RM, i am really grateful for your effort!good work! bakis. --- ringmod45 wrote: > hello group members, sorry about the multiple posts > for the polls. > it seems that yahoo switched the sequence to the > poll i just made > this evening. as i was re-editing it would scramble >
2002-03-01 by bakis Sirros
hi duff, thanks for your measures...i don't have a voltometer so i beleive the values that you measured arer correct.so,triggers(7-8volts)are a mystery...why won't they work with the a150???the gate i have tested comes from the kenton pro-2000 and it's 0 to +5volts,so,it's expect
2002-03-01 by synth_freak_2000
hi RM, wow.....i just saw yor poll...it's huge!!! please you have to make 2 corrections:there are two choices that have to be rewritten because you have put two different(or three...) options in only one poll choise,i think it's the third and the fourth choise..... good work,thou
2002-03-01 by Florian Anwander
Hi martin > Is it just me and Florian who like to see this module in production, > i want some feedback please, maybe even a poll created on the subject. I have to admit, that I would not buy it, since I can build it on my own. Nevertheless I'd suggest some features: It should co
2002-03-01 by ringmod45
hello group members, sorry about the multiple posts for the polls. it seems that yahoo switched the sequence to the poll i just made this evening. as i was re-editing it would scramble the order again. i hope you enjoy the features and functions that i am proposing. please take t
2002-03-01 by martin olson
> Doepfer_a100@yahoogroups.com "duffnuff" Date: Thu, 28 Feb 2002 16:53:35 -0000 > [Doepfer_a100] Re: wish 4 a offset generatorReply-To: Doepfer_a100@yahoogroups.com > >> Why >> not just use an A138a mixer and the CV source module, like I >>do? Yes i could do it that, but i need t
2002-03-01 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: TOUCH KEYBOARD FEATURE AND FUNCTION POLL #3 A touch keyboard poll to see which features should be added for the proposed touch plate keyboard sequencer. the poll will close on march 21,2002. so please
2002-03-01 by Andreas Lindholm
Ohh, I do have a few books, but with no seqencer at all (regelwerk included in the count of nothing) I don't have anything to try things out on. What I like about modulars is the fact that you can read a thing, then go and test it. It is first when I test it it gets obvious how i
2002-03-01 by Andreas Lindholm
I guess somebody will indeed vote for that option so why take it away when somebody perhaps want that option. Of course I could rewrite it in a more positive tone, but I have no heart feelings about blue LEDs, colored cases and stuff that adds little to the usability. So it is a
2002-03-01 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: touch keyboard poll to see which features should be added for the proposed touch plate keyboard sequencer. the poll will close on march14,2002. so please get your vote in to make a difference.if there
2002-03-01 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: touch keyboard poll to see which features should be added for the proposed touch plate keyboard sequencer. the poll will close on march14,2002. so please get your vote in to make a difference.if there
2002-03-01 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: TOUCH KEYBOARD FEATURE AND FUNCTION POLL #3 A touch keyboard poll to see which features should be added for the proposed touch plate keyboard sequencer. the poll will close on march14,2002. so please g
2002-03-01 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: touch keyboard poll to see which features should be added for the proposed touch plate keyboard sequencer. the poll will close on march14,2002. so please get your vote in to make a difference.if there
2002-02-28 by ringmod45
hi bakis, no problem for the poll. it will take an hour or so to do it. it will be complete and precise. if anyone has questions on any of the features that i propose. i will be glad to answer any questions. to andreas, it gets confusing to explain functions and features with out
2002-02-28 by davevosh@aol.com
In a message dated 2/27/2002 8:49:05 AM Eastern Standard Time, synth_freak_2000@yahoo.com writes: > .......don't you understand that this sequencer > NEEDS to be with the sensor keyboard? bakis, sure but the touch keyboard doesn`t need the sequencer functions to be good. a carefu
2002-02-28 by davevosh@aol.com
In a message dated 2/27/2002 1:32:53 AM Eastern Standard Time, ringmod45@yahoo.com writes: > hi dave, ask and ye shall receive. i made a folder in the files > section. i have in a few pictures plus the brochures for the 248 marf > and 217 touchplate. hope this does the trick. > r
2002-02-28 by duffnuff
bakis, hmm, your comment prompted me to measure these voltages. to my surprise, here are the results: (i'm sure there's some variance from one module to the next as well) A155 triggers send 7-8v and the GATE sends 10v A162 TRIG output is 10v A177 foot controller GATE output is 12
2002-02-28 by bakis Sirros
hey RM, you really seem to know a lot about the buchla sensor keyboard and the serge T.K.B.!! PLEASE,DO ME A FAVOUR:as you have so many interesting suggestions ,create a new poll about the sensor keyboard with more additional features that you would like to see included(name it,p
2002-02-28 by bakis Sirros
hi dugg, i don't think that this will help because the problem is that the triggers from the a155 are from 0 to +12volts and that's the problem(gates are from 0 to +5 volts)...but i think attenuating them with the a129/3 will be the solution... synthfreak --- duffnuff wrote: > --
2002-02-28 by Andreas Lindholm
Are you sure about that, what will you vote for then? Personally I feel that every vote needs a na answer to both ends of the scale. If there is an option for nothing there should be one for everything. Although I admit there is a bit of irony in option 4 which is the second last
2002-02-28 by synth_freak_2000
andreas, i meant option 4....so, why don't you want to erase it??you are the one that said something about politness and this option with the irony of yours isn't polite,don't you agree?? i hope that i explained to you some things about the many versions,and,and,and... please exp
2002-02-28 by Andreas Lindholm
Go look it up please I don't want to be a rule and ethics officer I just pointed out that there are simple guidlines about general chat and mail ethics that helps in avoiding insults and unnessecary bad mouthing. It is generally considered impolite to shout at people and THIS IS
2002-02-28 by Andreas Lindholm
Sorry, RM. I see you have written quite a lot about different specs on the TSK and other thing and they seem valid to me, but quite frankly you wrote i too much details so I lost track. I hope somebody understood it better than me. So I can't really say anything since I couldn't
2002-02-28 by Andreas Lindholm
Just for the record, I think that the A100 is great, if the rest of the doepfer line was that good I would have no problem at all. > at last, > andreas a positive comment about the a100... > bakis. > > > > > In Doepfer_a100@y..., "Andreas Lindholm" > wrote: > > All I can say is t
2002-02-28 by Andreas Lindholm
Thank you for that Florian, as to what is to respected about something that you don't like I am not sure why you feel that. I feel that credits and praise should go where and to whom they belong and also criticism to those that have that coming. In the case of Doepfer a bit of bo
2002-02-28 by synth_freak_2000
thanks joe... bakis. In Doepfer_a100@y..., "buechlerjoe" wrote: > Patch a gate signal to the A150 Switch's I/O2 jack, and also to the > A170 Slew Limiter's input jack. The A170's output is patched to the > A150's CV jack. The A150 O/I output is patched, for example, to an > ADSR
2002-02-28 by synth_freak_2000
o.k.,sorry andreas, i use this(!!!!!!!)to express excitement/happines about something new/good...i didn't know that it was for shouting(but i think shouting requires the capital letters,too??,i really don't know...) bakis, In Doepfer_a100@y..., "Andreas Lindholm" wrote: > Go look
2002-02-28 by synth_freak_2000
hi andreas, now a request: please, go to the polls section and delete the last choise of the poll that you created(the one about making fast bucks and so on...)i find it insulting for me and doepfer,too...because it seems ironic to me(correct me if i'm wrong) some explaining: i d
2002-02-28 by bakis Sirros
i don't think that i have the luxury of expanding my a100 as i try hard to save this money(beleive me,i try hard)and i,too, try to buy modules that i think that will help me in my music... synthfreak --- buechlerjoe wrote: > Hi Synthfreak > > this group isn't about marketing for
2002-02-28 by buechlerjoe
Patch a gate signal to the A150 Switch's I/O2 jack, and also to the A170 Slew Limiter's input jack. The A170's output is patched to the A150's CV jack. The A150 O/I output is patched, for example, to an ADSR for a delayed envelope. By adjusting the "rise" slew rate, you can contr
2002-02-28 by synth_freak_2000
--- In Doepfer_a100@y..., "Andreas Lindholm" wrote: > and by the way > google up netiquette or net ettiquete... > > /Andreas what exactly do you mean here???my english aren't very good... bakis.
2002-02-28 by synth_freak_2000
at last, andreas a positive comment about the a100... bakis. In Doepfer_a100@y..., "Andreas Lindholm" wrote: > All I can say is that you are right, I have the A-129/3 and use it most of > the time to increase gatesignals from other machines and to tweak > cv-modulations. This is
2002-02-28 by synth_freak_2000
In Doepfer_a100@y..., "buechlerjoe" wrote: >> Thats how I use the A162 also. Too bad it doesn't CV control of delay > time to create "swing" notes (oops! no suggestions for improvements > please!) you can acieve some thing useful with the a142...by voltagecontrolling the decay ti
2002-02-28 by synth_freak_2000
another way to achieve negative voltages is to change a jumper setting in the a176 pcb and make the pontesiometers send a voltage in the range of:+2.5 to -2.5.also another cv cource in the a100 system is the a155,just stop it in the right step...also the a129/3 if you connect not
2002-02-28 by synth_freak_2000
nice tip duff, very useful to turn triggers into gates... thank you!!!! -- In Doepfer_a100@y..., "duffnuff" wrote: > --- In Doepfer_a100@y..., bakis Sirros > wrote: > > no,RM, > > i mean that,if i connect one of the triggers output of > > my a155 to the i/o jacks of the a150 ,tha
2002-02-28 by synth_freak_2000
hi martin, i didn't say that i don't want an offset/attenuator module,i just don't understand what will be the difference between this and the a129/3... bakis. -- In Doepfer_a100@y..., "martin olson" wrote: > Is it just me and Florian who like to see this module in production, i
2002-02-28 by Andreas Lindholm
Okey, this as rude as I will ever get. Go out and read up on smileys, then go back and read the rest of my message in its entirety and by the way google up netiquette or net ettiquete... /Andreas ----- Original Message ----- From: "bakis Sirros" To: Sent: Thursday, February 28, 2
2002-02-28 by Andreas Lindholm
All I can say is that you are right, I have the A-129/3 and use it most of the time to increase gatesignals from other machines and to tweak cv-modulations. This is a great standard module that is more useful in the system as a whole than in the vocoder(although it is good there
2002-02-28 by buechlerjoe
> i use > the 162 on the 155 trigs to turn them into gate signals when > necessary. set delay time to '0' and vary the length to set gate > time. Thats how I use the A162 also. Too bad it doesn't CV control of delay time to create "swing" notes (oops! no suggestions for improveme
2002-02-28 by buechlerjoe
When I need a negative offset, I patch the A176 CV Source thru the A175 Voltage Inverter. Joe --- In Doepfer_a100@y..., "duffnuff" wrote: > > Why > > not just use an A138a mixer and the CV source module, like I > >do? > > > > Joe > > joe > great suggestion (duh). makes sense for