Re: Lightroom 1.1 and QTR
2007-06-30 by Carl Schofield
Eric, There is an issue with color management in LR that has not yet been acknowledged by the developers. The basic problem is that LR does not properly
Messages
Browse messages
Page 226 of 318 · 15852 messages matched
Newest QTr version question
2007-06-29 by edymagno
I ve seen in Version 2.5.1 tech notes of this rip, that it now has profiles for papers that had to be printed with photo black (K2) ink with the Epson driver.
Re: QTR curves for R200 printer using UT2 inks
2007-06-29 by Daniel Jackson
... with Paul s workflow using the Epson driver in general? Mark, I ve been using Paul Roark s curves with UT7 on an Epson 2200 for a few years and have been
RE: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-29 by Eric Neilsen
Look in the read me section of the upgrade to 1.1. There are known issues with certain aspects of printing. Sorry, I don t have all you email in front of me
Re: [QuadtoneRIP] Curves for Epson Ultrasmooth Fine Art with Epson 1280
2007-06-28 by alice grossman
With the Quadtone RIP and the Epson 2200, why do I only see the curve for Epson Enhanced Matte, and not Photorag? I use Photorag but can t find the curve for
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-28 by Carl Schofield
Just another observation on this problem. The prints produced via Lightroom Create-icc RGB profile QTR look like a softproof image in CS3 with simulate black
Premium Luster on Epson 9600
2007-06-28 by johnlpicker
I m new to Quadtone RIP (learned about it from Carlan Tapp at Maine Photo Workshop). I have Matte Black available, but because I usually am asked to print my
Re: [QuadtoneRIP] Curves for Epson Ultrasmooth Fine Art with Epson 1280
2007-06-28 by Roy Harrington
Either Enhanced Matte or Photo Rag. Roy
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-28 by Carl Schofield
Walker, I just checked this and did not find any difference using either Adobe98 or ProPhotoRGB for conversion via a create-icc profile in Photoshop. Seems to
Re:QTR curves for R200 printer using UT2 inks
2007-06-28 by David Whistance
Hi Mark I don t think that there is much difference in quality between the R200 and R220. They do need different curves however. I ve made my own which,
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-28 by Walker Blackwell
Maybe it s something to do with Lightroom s ProPhotoRGB workspace? I ll test a Photoshop ProPhoto to Create-ICC-RGB to print and see if I get the same thing .
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-28 by Ernst Dinkla
... I got both Carl. On BPC with Perceptual: Mike Chaney thinks that BPC shouldn t be used with Perceptual rendering as that rendering already compresses the
Re: Curves for Epson Ultrasmooth Fine Art with Epson 1280
2007-06-28 by Mike Dawson
I m using the Velvet Fine Art, not the Ultrasmooth (haven t heard of it yet). You might want to say what inks you re using. I m using the Cone K6 inkset. I
Re:QTR curves for R200 printer using UT2 inks
2007-06-27 by johnmarkwilkie
I ve heard lots of good things about the R220, however, as of right now, I ve got a lowly R200. Any idea about curves for the R200? Cheers, Mark ... year now.
Re: Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
Posted this reply a few hours ago by email, but didn t go thru so here is answer via web: Ernst, I just tried that. Converted the image file in CS3 to the QTR
Curves for Epson Ultrasmooth Fine Art with Epson 1280
2007-06-27 by teachersailor1
Hello, I m using Quadtone RIP with my Epson 1280. I recently acquired Epson Ultrasmooth Fine Art paper, and I m wondering how to find the curves for that
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
Ernst, I just tried that. Converted the image file in CS3 to the QTR create- icc profile and then printed from LR 1.1 with color management off ( managed by
Re: Problems with QTR and Epson 3800
2007-06-27 by fularskitomasz
Great! It works! Thank You Very Much Roy.
Re: [QuadtoneRIP] Re: Lightroom 1.1 and QTR
2007-06-27 by Ernst Dinkla
... You could check whether it is the CM in LR by printing an image that is converted to the QTR paper profile in PS and have CM OFF in LR. -- Met vriendelijke
Re: [QuadtoneRIP] Problems with QTR and Epson 3800
2007-06-27 by Roy Harrington
You must print at 1440dpi (at 720 you only get half the amount of ink). I d use one of the profiles for a paper -- not the raw ones. Roy
Problems with QTR and Epson 3800
2007-06-27 by fularskitomasz
I have made a lot of test prints and always the same. B&W tiff printed from Photoshop with Advanced B&W look OK, the same tiff printed from QTR is VERY light,
Re: Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
... Thanks. I missed seeing the little note in the print panel indicating that BPC is on. Guess it is always on with either perceptual or relative. I tried
Re: [QuadtoneRIP] Lightroom 1.1 and QTR
2007-06-27 by Walker Blackwell
BPC is on
Re: [QuadtoneRIP] Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
Ernst, Perceptual, but there is no option to set BPC on or off - I don t even know what the LR default setting is for BPC. Carl
Re: [QuadtoneRIP] Lightroom 1.1 and QTR
2007-06-27 by Ernst Dinkla
... Perceptual with BPC ? Set BPC OFF if possible. The thing I encountered in Qimage, I have no experience with Lightroom. If that doesn t work or not enough
Re: [QuadtoneRIP] Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
I was using a custom create-icc profile (rgb mode) that I made for the paper I used (Merlin Natural) for the test. Actually, prints are not as bad as I
Re: [QuadtoneRIP] Lightroom 1.1 and QTR
2007-06-27 by Walker Blackwell
What profile where you printing with? -Walker ... [Non-text portions of this message have been removed]
Lightroom 1.1 and QTR
2007-06-27 by Carl Schofield
Good news/bad news. You can now print via QTR using color management in LR 1.1 (Mac) without getting crashes. Bad news is that rendering is not correct -
Re:QTR curves for R200 printer using UT2 inks
2007-06-27 by David Whistance
Hi Mark I ve been using QTR with the Epson R220 and UT-R2 inks for about a year now. I really like the combination. With the later versions of QTR and a mix of
Re: Digital Negatives with QTR
2007-06-27 by Lotusm50
Any thoughts on whether these digital negatives can be made with the Piezography K7 inkset? ... negatives.
Re: R1800 + K7
2007-06-26 by rudedogphoto
Mike, thanks a mil for the info and your time spent. I installed K3 inks, made color prints, and then reinstalled Piezo K7 inkset. Now, instead of all seven
R800 custom curves / profiles
2007-06-26 by beardie_dragon
Hi, I have understood and made profiles for my 2100 and am now moving on to the R800 but lack an understanding of how to progress. I started by measuring the
Reminder: Black and White landscape exhibit: cross posted
2007-06-26 by Tyler Boley
Some of my work will be included in a three person show at Benham Gallery here in Seattle- http://benhamgallery.com/ In July and August. I have known Jeff for
Re: [QuadtoneRIP] L to density
2007-06-26 by Jose Usoz
Thanks Michael! Perfect!
Re: [QuadtoneRIP] L to density
2007-06-26 by Michael King
use this calculator http://www.brucelindbloom.com/index.html?CompandCalculator.html ... [Non-text portions of this message have been removed]
L to density
2007-06-26 by Jose Usoz
Hello, I know it is an easy question, but am not of sciences... How do I translate an value Lab L* to Density? In my EyeOne data I see the L* values, but no
Hahnemuhle Photo Rag Pearl. Has anyone tried it yet?
2007-06-25 by Zisis Kardianos
I m about to use it soon, on both of my Epsons, R800 and R2400. I ll first try the canned icc profile for the PK R2400. Anyone has any experience with this
Re: QTR & R1800 not printing K7
2007-06-25 by michel_lefrancq
Michael, I also had this problem of not printing with my Epson R2400. Sometimes the paper get thru without printing, even with Epson driver if I did nt turned
Re: Profile for Epson 1270, Enhanced Matpaper w/ EPSON inks.
2007-06-25 by cwb1946
Roy: Your reply really leaves me quite confused. My limited (and a long time ago) experience with black only E1270 printing was a total disaster. For one,
Re: [QuadtoneRIP] QTR & R1800 not printing K7
2007-06-25 by Michael Hill
Michael - I have an R1800, using QTR and K7 inks. (1) I have found that firewire with QTR doesn t work very well, and so I d suggest going back to USB. Some
QTR curves for R200 printer using UT2 inks
2007-06-25 by johnmarkwilkie
Hi all, I managed to find myself a cheap (ok free...) R200 and have purchased MIS s UT2 inks for it. I ve experimented with Paul s workflow using the Epson
QTR & R1800 not printing K7
2007-06-24 by Michael
Hi - I am new to the group. I have a strong photographic background, but not strong computer skills. New R1800 with with K7 neutral inks (first set). It was
QTR inks not recognized in 2400
2007-06-24 by hndrcksn_jm
Hi. I m suddenly having problems with the K7 inks in my 2400. I replaced the cartridges in the magenta and yellow positions. The magenta charged normally but
Re: [QuadtoneRIP] Re: Profile for Epson 1270, Enhanced Matpaper w/ EPSON inks.
2007-06-23 by Roy Harrington
It s just that there isn t much benefit over just using the Epson driver and black-only printing. Roy
Re: [QuadtoneRIP] Re: Super MicroWeave ?
2007-06-23 by Roy Harrington
The front panel adjustments are for paper feed issues. For the weave algorithm you can have 4 pass or 8 pass. In QTR the Resolution selection allows 1440dpi
Re: Super MicroWeave ?
2007-06-23 by Mark McCarvill
Hey Chris, The 7600 user guide just says that Print Adj adjusts the intensity of the micro weave pattern; improves quality but lowers printing speed. I
Re: Super MicroWeave ?
2007-06-23 by cwb1946
Thanks Mark. I had looked into this on a previous occasion, with little luck, and was going to revisit it this morning more carefully. I am curious if you
Re: Epson 2200 and Matte Ink
2007-06-23 by skefford_1
... How are prints if using the Epson driver? Steve
Re: Super MicroWeave ?
2007-06-23 by Mark McCarvill
Hi Chris, You can adjust the intensity of the micro-weave manually via the printer s control panel. It s under SelecType Paper Config Print Adj. The
Re: [QuadtoneRIP] Re: Epson 2200 and Matte Ink
2007-06-22 by clint davis
I have had the same issue for many months with my 2200. I profile my monitor monthly and prints look fine on screen. But after printing, it looks like the