How to go about fixing muddy curve
2014-05-21 by agavemail@...
Hey guys, Very new to QTR and using Eboni-6 inks (new to those as well) in a 1430 and I have a general question or 2. Feel free to dumb down your responses!!!
Messages
Browse messages
Page 82 of 318 · 15852 messages matched
Re: [QuadtoneRIP] spyder calibration
2014-05-21 by joel
Thanks very much Ken Joel ... joelconison.com
Re: [QuadtoneRIP] spyder calibration
2014-05-21 by joel
Hi Jim, Thanks. So it can also read the gray patches used in QTR ? Joel ... joelconison.com
Re: 11880 printing incorrectly
2014-05-21 by heliograf0710@...
I´m running really crazy things through my Epson 3880 and 9890 printers - I´m printing on glass sheets which are coated with a special ink-receptive layer.
RE: [QuadtoneRIP] spyder calibration
2014-05-21 by Ken Rennie
Hi Joel I have a datacolor spectrocolorimeter mode #1005 which I bought second hand. Before I bought it I contacted Datacolor and explained what I wanted to
Re: [QuadtoneRIP] spyder calibration
2014-05-20 by Jim Thyer
Hi Joel, I do not know anything about the X-rite software, but the Spyder spectrocalorimeter has its own software for reading the patches. Quite a while since
Re: 11880 printing incorrectly
2014-05-20 by jonus7@...
I wrote a really long response to this post this morning but I guess its disappeared into the ether. So here it goes again. I ve never used this software
spyder calibration
2014-05-20 by joel
Hello, IÆm thinking of purchasing a Spyder Studio calibration ( it has a spectrocolorimeter) unit & was wondering if you can still use X-rite ColorPort
Re: 11880 printing incorrectly
2014-05-20 by heliograf0710@...
Have you checked the paper-curve combination, the right black installed , maximum printer resolution, and if you are printing on the ink-receptive side of
QTR and Epson 1410
2014-05-20 by zillad01@...
Has anyone had any success with installation of QTR, on a Mac running Mavericks, or rather the install script for the 1400 being used for the Epson 1410? I
Re: 11880 printing incorrectly
2014-05-19 by jonus7@...
I m really needing some help with this issue, I ve never worked QTR before at any of my printing jobs, and I ve tried everything I can think of to address the
11880 printing incorrectly
2014-05-16 by jonus7@...
Hi there, This is my first time posting as I ve recently started a new job with printing lab that utilizes QTR in a Mac environment on an Epson 9890, 11880 and
Re: [QuadtoneRIP] Re: Curve for Canson Platine Fibre and Eboni-6 ink on 1430
2014-05-15 by Pete Bergstrom
On Wed, May 14, 2014 at 11:57 AM, heliograf0710@gmail.com [QuadtoneRIP]
Re: [QuadtoneRIP] Re: Curve for Canson Platine Fibre and Eboni-6 ink on 1430
2014-05-14 by Sylvain M.
Ebon inks are dedicated to matte papers. Even if some baryta can be used (such as Hanemühle FA Baryta) with Lumijet afterwards, the Platine Fiber is not
Re: Curve for Canson Platine Fibre and Eboni-6 ink on 1430
2014-05-14 by heliograf0710@...
Does QTR support other than Epson UC and Piezography inks? I don´t think so. Otherwise you could try a curve for a similar paper? Is it a raw paper or does
blue/sepia split tone curve available?
2014-05-14 by heliograf0710@...
Hello ! Is there anybody who has a QTR curve available for printing in real split tone (blue/sepia) with Epson UC inks? I dont mean the mix of
Using Drop-Quad-Profile script (HELP!)
2014-05-11 by dkosiur@...
I m mid-way through the process of creating a new paper profile following the instructions Getting Started with QuadToneRIP 2.4 and am now puzzled as to the
Which dither to use?
2014-05-09 by Mark Savoia
Mac OSX 10.9.3 QTR Under advance adjustments is choices for dither to use: Ordered Adaptive Hybrid Fast Very Fast What one works best for silver neg printing?
Curve for Canson Platine Fibre and Eboni-6 ink on 1430
2014-05-09 by agavemail@...
Just getting back into printing after a loooong hiatus. Decided to get a 1430 and ordered Paul s Eboni-6 inkset. My favorite paper was Cansons Platine Fibre
Re: [QuadtoneRIP] Removing custom curves
2014-05-09 by Mark Savoia
Thanks Roy, that did it. Mark www.stillrivereditions.com
Re: [QuadtoneRIP] Removing custom curves
2014-05-09 by Roy Harrington
That is the correct place but you have to run another install before the driver itself gets updated. Roy ... -- Sent from Gmail Mobile
Re: [QuadtoneRIP] Removing custom curves
2014-05-08 by Mark Savoia
Tried that, they are not in there. Mark www.stillrivereditions.com
RE: [QuadtoneRIP] Removing custom curves
2014-05-08 by Luciano Teghillo
Look in /Library/Printers/QTR/quadtone/[name of your printer] Luciano _____ From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of
Removing custom curves
2014-05-08 by Mark Savoia
I have five I want to remove from the curve drop-down menus. Where are they hiding? Max OSX Mark www.stillrivereditions.com
Re: Help with commandline/terminal options
2014-05-06 by <kimaster014@...>
My apologies for the many messages, but I just had a breakthrough - albeit one I should have seen sooner... The way to do automated calling is to edit the
Re: Help with commandline/terminal options
2014-05-06 by <kimaster014@...>
Just wanted to give you an update, for those who are looking to use QTR through command line, I tried to emulate the log files that are created in windows, and
Re: Baffled over inability to print using QTR with new computer
2014-05-05 by <docsock41@...>
Problem solved. The computer had created a virtual printer, to whose input queue it was sending all of my QTR print jobs. While the Epson 2880 print queue
Re: [QuadtoneRIP] Help with commandline/terminal options
2014-05-05 by John Labovitz
IÆve been working on a project that wraps the QTR system in a command-line toolkit (implemented with the Ruby language). However, it relies on OS X s CUPS
Re: [QuadtoneRIP] Help with commandline/terminal options
2014-05-05 by Kazimali Khaki
Thanks for the link Steve, had never found Turbo Print in my searches before, and looks like they have a windows alternative called PrintFab. Thanks again..
Help with commandline/terminal options
2014-05-05 by Kazimali Khaki
Hi, I have been developing a low-cost PCB screen printer for the past few months, based on the Epson R7880, with uses a camera to align each printed image to
Printing an RGB file instead of Greyscale
2014-05-03 by <kjrslr@...>
I m just courious as to what or how an RGB file image would look like printed with a Piezography inkset, through QTR, rather than first converting it to a grey
Re: [QuadtoneRIP] Baffled over inability to print using QTR with new computer
2014-05-03 by <donsbryant@...>
I m not sure what you are using your XP workstations for, but for a photographic editing workstation Win 7 64 with a lot of memory, a uber fast processor,
Re: Baffled over inability to print using QTR with new computer
2014-05-03 by <docsock41@...>
I had been hoping for slightly more constructive responses to my problem in using the new computer. The issue was not really about replacing the old computer,
Re: [QuadtoneRIP] Baffled over inability to print using QTR with new computer
2014-05-02 by Jim Thyer
I recently looked up implications of Microsoft no longer upgrading WIN XP. Figures indicate around 30% of PC computers around the world are still using XP.
RE: [QuadtoneRIP] New QuadToneRIP version 2.7.5 for Mac and PC
2014-05-02 by <roy@...>
I don t use the Cone-GO workflow at all and haven t ever figured out why it exists. Some of the paper feed commands were changed for this new release so I
Re: [QuadtoneRIP] Baffled over inability to print using QTR with new computer
2014-05-02 by Mark Savoia
You replaced it just because of that? I have several XP machines I will use until they die. Microsoft really never offered any good support anyway. Mark
RE: [QuadtoneRIP] New QuadToneRIP version 2.7.5 for Mac and PC
2014-05-01 by R Gregory
Roy- do we know how this version handles the Cone-GO process for 7890 and x900 series printers?
New QuadToneRIP version 2.7.5 for Mac and PC
2014-05-01 by <roy@...>
QuadToneRIP version 2.7.5 Release Notes This is both a Mac OSX release and a Windows release. The primary additions are for various Paper Feed options.
Baffled over inability to print using QTR with new computer
2014-05-01 by <docsock41@...>
I had a cooperative and happy history with my old Windows XP computer, printing on an Epson 2880 with QTR. Because of Microsoft s decision to longer support
Re: R3000 + Manual Front
2014-04-29 by <benedictchen22@...>
Thanks for the info. I read the post but I got really confused thanks for taking the time to make thing clear in this thread.
Re: Jepg Vs Tiff In QTR.
2014-04-29 by <donsbryant@...>
What ever your workflow is if you submit a RGB file to QTR then R=G=B must be true otherwise those values are changed to calculate the K values since it is a
Re: [QuadtoneRIP] Re: R3000 + Manual Front
2014-04-28 by Roy Harrington
There are two modes for using the Front Loader on the R3000. The current version only supports the Front - Fine Art mode not the Front - Poster Board mode
Re: R3000 + Manual Front
2014-04-28 by Harry Lockwood
You need to see the recent posts between Roy Harrington and me (hlockwood.) You can front feed the R3000. Harry Lockwood hflockwood@verizon.net
R3000 + Manual Front
2014-04-28 by <benedictchen22@...>
Hi I have been reading the threads. I am planning on getting peizography glossy OR making my own with R3000. But my issue is about R3000 seems not to be able
Re: [QuadtoneRIP] Getting custom curves to show up in network printer setup
2014-04-28 by Mark Savoia
Check that, just stumbled on what was happening. Needed to create empty folder in library/printers/qtr/quadtone called Quad4900_K7 (yes _ and not -) then the
Re: [QuadtoneRIP] Getting custom curves to show up in network printer setup
2014-04-28 by Mark Savoia
... Did that. ... Read that several times. ... I have the networked printer named Quad4900-K7 and the install script is Install4900-K7.command, still can not
Updated B&W test image
2014-04-28 by <yg_1@...>
I know that a lot of people have downloaded my B&W test image over the years, so I ve produced a new version that improves and adds a number of features,
Re: Jepg Vs Tiff In QTR.
2014-04-28 by <benedictchen22@...>
Hi, My work process from LR to QTR is to use develop with my own QTR icc (Normally here I convert to BW) use print to add text , title captions Export as
Re: Jepg Vs Tiff In QTR.
2014-04-27 by <donsbryant@...>
The short answer is yes because QTR will convert RGB much like the Epson ABW drive if you are familiar with that. Roy includes a write wish you should read
Re: [QuadtoneRIP] Jepg Vs Tiff In QTR.
2014-04-26 by David Kachel
So the Question is will exporting Jepg from lightroom print module then to QTR affect the results? Yes. David Kachel ___________________ Artist-Photographer