Yahoo Groups archive
Messages
Page 15 of 29 · 1446 messages matched
2005-06-18 by don hassler
Welcome on Malcom, thanks for joining. The biggest issue in my opinion is the Korg's hz/votage scaling, which makes interfacing with more conventional systems a pain. In fact, Korg sold a scaler to allow for interfacing when they made the MS. I would submit an AS system you are d
2005-06-18 by Malcolm Davis
Hi, I have a small home studio in a loft, with the usual mix of hardware keyboards, software based synths, all running through Abelton Live 4.1.2, and a strong desire to add additional vintage analogue gear to the solitary Korg MS-20 in my possesion. However the cost of analogue
2005-06-16 by don hassler
Sadly, I already removed Keith from the list. Hopefully, he can clear his situation up and reapply. Sorry for the inconvenience this mishap has imposed on everybody. DonHassler --- coyoteous wrote: > Attn: Keith Pomfret > > Dude, your automated spam spammer is spamming way > more
2005-06-08 by ben vehorn
Well, I think I figured out the cause of this. I had installed a Doepfer a-127 triple filter in the case last week and had been using everything together with no problems. The soldering points for the pins on one of the circuit boards for the Doepfer come very close to the lip of
2005-06-08 by ben vehorn
Powered up my Asys system per usual today and... POOF! I quickly powered off my case and unplugged it, then removed all the modules to look. The smoke came from the comb filter, which now has a nicely toasted capacitor at C14 on the PCB. Didn't try to re-power it up. I plugged th
2005-06-06 by David Salter
Mark, No problem. Rgds David David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.net -----Original Message----- From: analogue_systems@yahoogroups.com [mailto:analogue_systems@yahoo
2005-06-05 by Peter Grenader
That's it! Two other important points: 1) The RS15 uses keyed connectors on its backplane - it will not allow you to plug it in backwards (on that end) because it utilizes the polarizing key inherent in that inline header design. 2) While it may not be the case with all of their
2005-06-05 by Bakis Sirros
hello, if i remember well, doepfer rack case have their connectors installed is such a way so as the red stripe of the ribbon cables to be downwards. in the Analogue Solutions cabinets, the doepfer connectors in their modules are in such a way installed so as the red stripe to fa
2005-06-05 by lightmagus2004
Sorry Dave been really busy of late. I am looking to try and sell the cables with the AS1 as incentive so for the time being i am keeping them together, sorry. Mark --- In analogue_systems@yahoogroups.com, David Salter wrote: > Hi Mark, > > Any news on how you wish to proceed? >
2005-06-02 by tetrathionic
Here is a list, all like new: RS-510E SYNTHI TRAPEZOID GENERATOR - $200.00 RS-500E SYNTHI FILTER- $150.00 RS-220 X-Y JOYSTICK CONTROLLER- $155.00 RS-80 VC LFO- $115.00 RS-30 FREQUENCY TO VOLTAGE CONVERTER- $100.00 RS-16 6-SPACE RACK FOR MODULES- $325.00 buy all for only $900.00 +
2005-06-01 by ilanode
Hello Bill, why not getting in touch with ASol directly for price and configuration? However I guess the TR808 clones will be discontinued soon. They're appearing quite cheap on ebay for a while. If you interested in a review on ASol modules check the ASol HP as well for links to
2005-05-12 by formantuk
Hello, I have one RS200 sequencer for sale. It has been modified with 1/4" jacks to work with Moog, .COM & MOTM etc... Also it has a custom green start LED and green switch caps for the skip/run makes thing a lot easier to see in a live situation. I've reduced the price to £250 f
2005-05-11 by David Salter
Hi Mark, Any news on how you wish to proceed? Rgds David David Salter Senior Project Manager Reuters Ltd Tel +44 20 7542 2402 Mob +44 7990562402 email david.salter@reuters.com RM david.salter.reuters@reuters.net -----Original Message----- From: analogue_systems@yahoogroups.com [m
2005-05-08 by ilanode
Hi Bill, could be wrong but guess you're mixing up two companies: AS8899 seems to refer to "Analogue Solutions", 88 to their TR808 style drum modules and 99 to... Try this link: http://www.users.globalnet.co.uk/~concuss/ However I've no experience with ASol stuff. Regards, Ilando
2005-05-07 by bill
could anybody tell me where I can find some info on the "AS8899 Full Percussion System" has anyone here worked with it? -bill
2005-05-01 by tetrathionic
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=38071&item= 7319603522&rd=1
2005-04-27 by David Salter
Hi Mark, I'm happy to check out postage cost, you'll need to tell me how much it weighs though. As for payment, If you mail me privately with your details I'll can send you a cheque and when it's cleared you can post. If you have a Paypal account happy to do it that way, again ma
2005-04-26 by boward_k
just connected the RS90 to my RS10..which had the colored end facing downwords..But when connecting doepfer modules to the RS10 (whoes bus connectors I asume are just above the AS's..and by the way also apears to have 8 bus connectors instead of the told 7) the doepfers colored e
2005-04-26 by David Salter
Hi Mark, I'd be happy to take the various cable (24 in box - Red, Yellow, Blue and green of various lengths) for sale £20. No modules as I still have nearly a dozen waiting for the next cabinet to be finished. Let me know. Thanks David David Salter Reuters Ltd Senior Project Mana
2005-04-26 by lightmagus2004
--- In analogue_systems@yahoogroups.com, David Salter ok yeah no problem, you will need to check P&P and add to the final cost then let me know how you wish to pay. Never sold anything over the net before Mark wrote: > Hi Mark, > > I'd be happy to take the various cable (24 in bo
2005-04-26 by lightmagus2004
--- In analogue_systems@yahoogroups.com, "lightmagus2004" wrote: > > Hello guys i have the following peices of kit for sale. > > Low Pass Filter (RS-100) £70 > Multimode Filter (RS-110) £75 > Multiple (RS-170) £10 > Envelope Generator (RS-60) x3 £70 each > VCA (RS-180) x2 £50 eac
2005-04-26 by lightmagus2004
Hello guys i have the following peices of kit for sale. Low Pass Filter (RS-100) £70 Multimode Filter (RS-110) £75 Multiple (RS-170) £10 Envelope Generator (RS-60) x3 £70 each VCA (RS-180) x2 £50 each CV Buffer (RS-230) £30 VC-LFO (RS-80) £70 VCO (RS-95) x2 £80 each VCO (RS-90 no
2005-04-25 by Peter Grenader
Feeding 15 volts to a 12 volt module is in fact dangerous. But I'm not sure this is what you're referring to. 1) If you mean can you power a 12 volt module with 15 volts - don't do it. One, your warranty will blow along with the module. Not all 12 volt modules will die if you do
2005-04-25 by Peter Grenader
Analogue Systems makes a fine one themselves. boward_k wrote: > > > Looking for a 1/4-1/8 & 1/8-1/4 jack converter. > MOTM has the MOTM-940 patchpanel, are there any other options? > > /Boward > > > > > > > > Yahoo! Groups Links > > > > > > >
2005-04-25 by boward_k
so there is no chance that ill blow anything up if fed +/-15V CV to a +/-12V module, using the RS270? By the way..which manufacturers use banana jacks? And are 6,3m stackable? --- In analogue_systems@yahoogroups.com, Peter Grenader wrote: > Analogue Systems makes a fine one thems
2005-04-25 by boward_k
Looking for a 1/4-1/8 & 1/8-1/4 jack converter. MOTM has the MOTM-940 patchpanel, are there any other options? /Boward
2005-04-12 by boward_k
Why cant Analogue Systems start selling modules as DIY kits?
2005-04-10 by tetrathionic
Analogue Systems system 3 with walnut case on e-bay http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7314090397&rd=1& sspagename=STRK%3AMESE%3AIT&rd=1
2005-04-08 by formantuk
Hi, I'm playing a gig in London on the 23rd of april. I'll be using analogue systems equipment as well as .com, motom & doepfer. for all the info check out the web site http://www.mp3ambient.com/stone-idols/stone.html Regards Rob
2005-03-29 by dragonflymodular
Hi All I've just put a mixed bag up on ebay - a fine selection of bits and pieces for any AS diy-er. Take a look: Item number: 7311287127 Interesting swaps considered if uk based. I'm converting all my modules to 5U so any old battered but working stuff considered... Steven
2005-03-10 by Peter Grenader
Again, posting for a friend -he's selling more gear off. Please respond to Hans directly at: giftquestionmark@hotmail.com here's the list: Doepfer Adapter board 75 52.5 Rs15 case 479 335. Rs100 LPF 165 115.5 2x rs110 MMF 179 125.3 ea rs120 Comb Filter 159 111.3 rs140 midi/cv cove
2005-03-06 by wiard300
Sells for $269 new. I barely used it, it's in mint shape. Check my ebay feedback, my id is r1tual, for a reference. Thanks, Rob Adams Austin, TX USA
2005-03-03 by Bakis Sirros
hello rob, how much is the price of the minijack normal version rs200? also, do you accept payment via paypal? thank you, bakis. --- formantuk wrote: > > Hi All, > > Further update on the RS200s forsale you can view > them at this link. > > http://www.mp3ambient.com/RS200s-x2.jpg
2005-03-03 by formantuk
Hi All, Further update on the RS200s forsale you can view them at this link. http://www.mp3ambient.com/RS200s-x2.jpg Regards Rob
2005-03-01 by boward_k
ill buy your oscilators! they're in a good condition..
2005-03-01 by Peter Grenader
All, I am posting this on the list for a friend. This is not my gear that's being sold, I'm just passing the message here. I've seen it, it's super clean, but I can't comment on it --> please direct all inquires to Hans, the gentleman who is selling it (his email addy is listed b
2005-02-24 by Bakis Sirros
hello all, i'm thinking of maybe selling my korg ms03. it is in very good condition, never used. i bought it one year ago from a friend but never used it at all. the reason? i already have two ms20's... anyway, i'll sell my ms03 to buy a moogerfooger cp control processor. this wi
2005-02-22 by formantuk
Hi All, I have x2 RS200 sequential controllers forsale 1 is the standard mini jacks the other has been retrofitted with all 1/4" inch jacks. Also They both have a custom different colour start LED for step 1. £275 each Regards Rob Email rob@ukonline.co.uk
2005-02-21 by gareth.green@tvu.ac.uk
Hi , Just ring or email them, they are super approachable and friendly. Regards Gareth -----Original Message----- From: Eric Heath [mailto:el_heath@hotmail.com] Sent: Sat 19/02/2005 20:06 To: analogue_systems@yahoogroups.com Cc: Subject: [analogue_systems] French Connection again
2005-02-19 by jan.larsson
I have a French Connection that I've used with a Doepfer, an Oakley/MOTM modular and with my Moog Voyager. If you want to synthesize something like the original Ondes Martenot tone dont forget the amp and speakers. I've used a Line6 Pod XT for this purpose. /Jan Larsson 2005-02-1
2005-02-19 by Eric Heath
Hello. I'm one of those people that has slowly got obsessed about the Martenot since I 1st saw one in action and has allways dreamed of owning one. Now I'm also in a band and seeing Jonny Greenwood with his French Connection has made me realise if I keep working my arse off I mig
2005-02-15 by boward_k
Ive allready got the case...only want the powersuply(for about 8 modules) that will accept both analogue systems and doepfer modules. what should i be looking for?
2005-02-09 by waveform100
OK, I'll checking out ebay. I'll only take the multiples, when I am taking the RS-100! --- In analogue_systems@yahoogroups.com, Steven O'Connor OK wrote: > Hi Oliver > > I'd happily send a few modules over to you - should be no more than £10 > or so... > > Unfortunately some of t
2005-02-09 by sweathog2121
Anyone have any experience with kobiconn cables from mouser (reliability, build, etc.)? Thanks in advance. Beau
2005-02-09 by Bakis Sirros
hello steven, we meet again in the AS group! i will buy your rs60 adsr and rs90 vco on ebay, as you know! :-) best regards, bakis. --- Steven O'Connor wrote: > Hi Oliver > > I'd happily send a few modules over to you - should > be no more than �10 > or so... > > Unfortunately som
2005-02-09 by Steven O'Connor
Hi Oliver I'd happily send a few modules over to you - should be no more than £10 or so... Unfortunately some of the unsold ones are now on ebay.co.uk with a lower starting price - so you may get them even cheaper. No bids so far on the 100 with a couple of days left - good luck.
2005-02-09 by waveform100
Hello Steven, I'll go for your RS-100 and one A181! best wishes Olivier --- In analogue_systems@yahoogroups.com, "dragonflymodular" wrote: > > Hi all > I'm finally doing a huge sort out of my studio and am selling some of my duplicate > and under used modules. > > All are in grea
2005-02-06 by dragonflymodular
Hi all I'm finally doing a huge sort out of my studio and am selling some of my duplicate and under used modules. All are in great condition and have been purchased by me and kept in a smoke free studio. The list (most are about 20% off new price): AS rs40 noise £60 rs60 envelope
2005-02-03 by controlexsanguinate
Hello, I use modular synths all the time and I have been thinking about purchasing some AS modules. Since I already have the basics modules, what AS modules would you suggest? I would say the weirdest and strangest is the best but good sound is important as well. Also are there a
2005-02-01 by waveform100
I am a analogue Freak, but I think for a FS in a Feedback-Loop a digital Delay like the RS 290 is a bit more interesting in this particular case. The MoogerFooger Delay is really nice (I had one for about 2 years), but the frequency-range is small. The Frequency-Range of a Blacet