Yahoo Groups archive
Messages
Page 16 of 29 · 1446 messages matched
2005-02-01 by Bakis Sirros
hello w100, ingo, thanks for the info. i'll try the doepfer FS in the rs290's feedback loop. bakis. --- waveform100 wrote: > > I guess for these kind of evolving effects you can > also try the > doepfer FS, it is not a effect, that requires a > through-zero FS. To > be honest, I
2005-02-01 by selfoscillate
some weeks ago i tried the doepfer fs in the feedback loop of a moogerfooger delay with very nice results. frequency shifters and delays seem to be a rewarding combination in most cases. best wishes ingo --- In analogue_systems@yahoogroups.com, "waveform100" wrote: > > I guess fo
2005-02-01 by waveform100
I guess for these kind of evolving effects you can also try the doepfer FS, it is not a effect, that requires a through-zero FS. To be honest, I had the doepfer FS once and didn't like it. I didn't always love my Bode, but since I heard this effect, I would buy it just for that (
2005-01-31 by Bakis Sirros
hello w100, yes, if i had the bode shifter rs240... sadly, i do not have this module. bakis. --- waveform100 wrote: > > Try the Bode, this is the best in the feedback loop > so far. Check out > every Bode-Mode and also the zero-mode. > > --- In analogue_systems@yahoogroups.com, >
2005-01-31 by waveform100
Try the Bode, this is the best in the feedback loop so far. Check out every Bode-Mode and also the zero-mode. --- In analogue_systems@yahoogroups.com, "waveform100" wrote: > > This is deeper than I thought. BTW: I have Sample Rate and the > damping on the two attenuators. Tweakin
2005-01-30 by Peter Grenader
Doing this will void your AS warranty! controlexsanguinate wrote: > > > Hello, > > I would like to get some of the AS modules but I only have a Doepfer > 6U case to use. Is there a way I can use this case for AS modules? > If so, can I use both AS and Doepfer modules in the same
2005-01-30 by ilanode
Hello Thomas! Have a look at msg. # 591. Regards, Ilanode NB As an add. to 591 you can mix nuts (for ASys) and shortend mount. rails (for Doe). --- In analogue_systems@yahoogroups.com, "controlexsanguinate" wrote: > > Hello, > > I would like to get some of the AS modules but I on
2005-01-30 by controlexsanguinate
Hello, I would like to get some of the AS modules but I only have a Doepfer 6U case to use. Is there a way I can use this case for AS modules? If so, can I use both AS and Doepfer modules in the same case without any problems? Thanks for you time. Take care, Thomas
2005-01-28 by Bakis Sirros
hello wave100, i have the rs290/295 for about 18 months, so far, and i use it very often. i haven't tried many modules in it's external feedback loop ,but very good results i get when i patch the rs360 phase filter bank in the rs290's feedback loop. i usualy modulate one or two o
2005-01-28 by waveform100
This is deeper than I thought. BTW: I have Sample Rate and the damping on the two attenuators. Tweaking Sample Rate, Delay Time and filter cutoff at the same time (joystick) is pretty cool. --- In analogue_systems@yahoogroups.com, Bakis Sirros wrote: > hello wave100, > i have the
2005-01-28 by waveform100
I have the Sampler-Delay for about 2 Weeks now. I purchased it only because of the external feedback loop. Its so cool. When you put a good analogue filter into the feedback loop you get really analogue delays. They are as good as my real analogue delays. What else do you guys pu
2005-01-26 by ohimflu
hi there. i have French Connection n' RS 8000. but i'm quite new to modular synth. i'm wondering how connecting between X-Y outs and modules in RS8000. there might be several ways on wiring. can you help me, guys? if you explain in detail, i'll appreciate it.
2005-01-23 by masterchopchopchop
Hello there, The analogue system displays were very very cool at the namm show this year. I'm glad to say that i managed to see you guys this year. The systems are real amazing and i'm very happy to be able to finally try one out for myself! The costs of these really go to value
2005-01-11 by Modular Fan
hello, > Thanks for the message, I will reply now in private email. Take care, Shawn Cleary www.analoguehaven.com __________________________________ Do you Yahoo!? Yahoo! Mail - You care about security. So do we. http://promotions.yahoo.com/new_mail
2005-01-11 by sweathog2121
Hey Shawn, You can email me at Sweathog21@aol.com...sorry if it wasn't visible at the time you replied... Beau
2005-01-11 by hichakhok
Hi all. My AS modular is situated above a valve wurlitzer 145. When i play piano the integrator buzzes and rattles (sympathetic res). Its driving me nuts, as I am an electronics novice, can i start taking it apart and going in with blu tack or tightening things? I assume its the
2005-01-10 by Peter Grenader
You know what I REALLY like about Bob's letter? He spoke highly of Synth.com. It's not so much he spoke specifically about them, but he complimented a competitor. I wish more manufacturers did this. It REALLY bothers me when they start taking jabs at each another's methods and co
2005-01-10 by levka0
I have recently ordered 3.5 mm patch cables from A.Sys. and I can recommend them highly. They are well constructed, and are available in practical lengths and colours. They compare quite favourable with other brands. They have proven very reliable in my A.Sys., A.Sol., Doepfer, B
2005-01-10 by sweathog2121
Hey, Have you gotten any offers yet on the 8500 cabinet? Do you know how much it would probably cost to ship it to southern California? What do you think is a ball park range of a fair price for it? I'm getting ready to jump into the world of analogue modular synths so I'd be wil
2005-01-10 by synthtrader
hello, Sorry to list members that get this message more than once. I have a big, bad modular case project in the works :) so I'm going to sell or trade my Asys 8500 cabinet. For now I am only selling the cabinet, no modules, though that may change. Here is a photo of the actual u
2005-01-10 by Cynthia
ADVERTISEMENT The 2005 "Bug Off" Aleatoric Music Contests are back! Howdy Folks! It's time once again to harvest the mystically marvelous power of those synths you've got and put them to use making strange and haunting tunes that are wacky, alien, and totally obtuse! Whadd'ya mea
2005-01-07 by sweathog2121
Maybe this will end doubt about 1/8 (3.5mm) jacks in general. The following is a response to an Email I sent to AS (which is at the bottom of the page). I might also add that Bob responded very quickly (only took about 1 hour to get a response I believe): Hello Beau First of all
2005-01-07 by alt-mode
Folks, I finally worked out my chassis power problem and it was indeed an overtaxed power supply. This is an old RS-15 chassis and it appears that the power supply maxes out at 500ma. It would take varying amounts of time for the -12V rail to collapse depending on the modules in
2005-01-05 by sweathog2121
Have you sold the AS pre-amp and sequential switch yet? If possible could you respond to Sweathog21@aol.com? Thanks. Beau --- In analogue_systems@yahoogroups.com, scr 614 wrote: > These are used and no reasonable offer will be refused, they must go > quickly, ready to ship anywhe
2005-01-04 by sweathog2121
Do you still have the French Connection for sale? If you could reply to Sweathog21@aol.com that would be great. --- In analogue_systems@yahoogroups.com, "surbahars" wrote: > FS: French connection. Great keyboard in great condition. $1500. > Saves $500 from new. > > Bryan > Seattl
2004-12-27 by D. Espino
Hey Everyone, I am offering this Mellotron Black Mellotron MK VI #027 to this group first in order to avoid the hassles of ebay.. It is about 3 years old, was used only in a smoke free home studio environmet and is in pristine conditon. I am including the road case, two tape fram
2004-12-26 by Keith Pomfret
My two pence worth on the bigger better power supplies thing. I've not yet butchered any Analogue Systems kit but a set of home made racks running an assortment of Doepfer and ASol bits was close to the limit of the Doepfer supply on board one of the racks. I cast around eBay and
2004-12-26 by alt_mode
Doh! I can't believe I missed the power listings right at the top of the modules page. OK, I'm officially blind. Thanks for the pointer. One of the interesting problems I'm seeing is that if I pull out an RS-110 filter (45ma), the chassis seems to work fine but if I instead pull
2004-12-26 by Bakis Sirros
hello, the current draw info for each module is in their website. here is the link: http://www.analoguesystems.co.uk/pdf/Appendix%2011.pdf bakis. --- alt-mode wrote: > Folks, > > Does anyone know if it is possible to get a bigger > power supply for an older > RS15 Chassis? Mine d
2004-12-26 by alt-mode
Folks, Does anyone know if it is possible to get a bigger power supply for an older RS15 Chassis? Mine doesn't have enough power for my modules. [Remove a largish module (e.g. RS-110) and it runs fine; put it back and the chassis will run for a bit but then it will generate a lou
2004-12-20 by energyorange3
I make a mish-mash of electronic and acoustic " Music". I say " Music" because I am not trained as a musician proper, but rather as a sound stylist. I fit pretty well into the "Exparamental" catagory. I collect folk instruments from all over the world as well as electronics. I li
2004-12-20 by don hassler
Hello and Welcome! Congrats on your new purchase. I'm sure you will find your system to be delightful. What sort of music do like to make? Don Hassler USA --- energyorange3 wrote: > > Just popped in. I have recently purchased a "System > 1 Rack" and am > now completely absorbed i
2004-12-20 by energyorange3
Just popped in. I have recently purchased a "System 1 Rack" and am now completely absorbed in it. I found this group and I hope to learn a lot. So anyway- HI
2004-12-08 by Robert Hoffman
Just picked up some more Blacet racks so I'm selling off some redundant modules: Blacet Final Filtre, new $201, buy it now for $150 plus shipping Blacet Frequency Divider, new $134, buy it now for $100 plus shipping Blacet Binary Zone, new $168, buy it now for $125 plus shipping
2004-12-03 by waveform100
I am looking for a RS290 Sampler Module in perfect shape. I would trade it for a perfect shape Bode RS240 against the RS290 and 150£. Or for my RS110 (and I pay something). Or I buy without trade....
2004-11-22 by unknown freak
The Doepfer system is sold! -----Original Message----- From: unknown freak [mailto:vogelscheiss@vogelscheiss.com] Sent: Monday, November 22, 2004 3:11 PM To: analogue_systems@yahoogroups.com Subject: [analogue_systems] FS: 2 Doepfer 6U racks populated with 4 complete voices: $275
2004-11-22 by unknown freak
I'm reconfiguring my studio and find myself with an embarrassment of Doepfer riches for my current purposes, so I'm offering for sale 2 of my 8(!) Doepfer 6U racks, populated with 4 complete voices for $2750 for both or $1500 each. Everything's in very good condition. Here's the
2004-11-20 by levka0
Keith Many thanks for this interesting impression of the RS370 series. I have been considering this module for some time now, but have not been able to find user experiences anywhere. Would you be able to post some MP3's of your experiments in this group ? best regards from Amste
2004-11-18 by Keith Pomfret
If you can't be bothered to read it all, the PS covers it nicely I have been building a modular out of mainly AS but other assorted bits as well. Despite my intention to stay monophonic, Bob persuaded me that the RS370 polyoscillator series was worth a look. I'm not a great lover
2004-11-17 by stuadh
Hi, I have a recent RS15 case (bought this summer) and I have filled up the seven Doepfer slots. However, can anyone tell what the IDC slot next to the fuses on the power board is? Yours Aye Stuadh
2004-11-10 by Robert Hoffman
They're all gone. Thanks to everyone who replied. Rob On Tuesday, November 9, 2004, at 10:52 PM, Robert Hoffman wrote: > My apologies to those who will receive this on multiple lists. Just > making some room in the racks. > > Wiard 1210 Noise Ring Data Resonator. Frac-Rac/Blacet
2004-11-10 by Robert Hoffman
My apologies to those who will receive this on multiple lists. Just making some room in the racks. Wiard 1210 Noise Ring Data Resonator. Frac-Rac/Blacet compatible. These go for $249 new, get it now for $199 plus shipping. Very cool module but I just ordered a blue one. Info can
2004-11-05 by scr 614
These are used and no reasonable offer will be refused, they must go quickly, ready to ship anywhere in the world AS VU Meter (RS-190) AS Inverter/Pre-Amp (RS-70) AS Sequential Switch (RS-150) Modules are without ribbon cable for power supply Cheers Toby steelcapped@gmail.com
2004-11-04 by waveform100
Mint condition, only non-smoke studio. For 450£. Europe preferred best wishes Olivier Gerber (also selling one AS Multimode-Filter)
2004-10-29 by bdu@fdiskc.com
> > Folks, > > I've got a bit of a strange problem that has cropped up with one of my > RS-15 > chassis. This is an older chassis that I bought used and it is filled > with > audio processing modules (filters, VCAs, comb filter, delay, phaser, > etc.). > At odd times, all of the
2004-10-29 by alt-mode
Folks, I've got a bit of a strange problem that has cropped up with one of my RS-15 chassis. This is an older chassis that I bought used and it is filled with audio processing modules (filters, VCAs, comb filter, delay, phaser, etc.). At odd times, all of the modules will produce
2004-10-29 by alt-mode
Loren, Thanks for the info! I did some searching locally for these screws and found a place that had lots in stock but their minimum quantity was 1000 (for $18) and the minimum order was $100! From there I went to a local HW store that didn't have anything smaller than M3 and the
2004-10-28 by lightmagus2004
Hello i am thinking of selling my AS system 1 which is less than 1 year old. I also have an Exta RS15 + RS90 + 30 or so assorted patch leads. Can someone give me an idea of what they would deem a fair price for this. On the AS site System 1 is £1065, the RS60 is £85 and the RS90
2004-10-28 by Loren Nerell
At 08:07 PM 10/27/2004, you wrote: >Hi Folks, > >Can someone provide me with the *exact* size for ASys module mounting >screws? M2.5 x .45 x 6 mm Panhead Phillips, I bought a bunch from www.fastener-express.com Take care. - Loren Nerell -------------------------------------------
2004-10-28 by alt-mode
Hi Folks, Can someone provide me with the *exact* size for ASys module mounting screws? It would be great if someone could provide a link to the specific screws from a vendor that sold them. I tried to measure them and order some from Mouser and I now have 100 incorrect screws. O