Re: Psicraft editor
2005-12-12 by Greg
An alternative interface, like the M-Audio 1x1 USB MIDI I/F, is a fine idea. It s cheap, it s easy to install , and it works. However, if you are having
Messages
Browse messages
Page 57 of 144 · 7159 messages matched
feedback delay
2005-12-12 by dhamaryder
This is strange. I never noticed it before. I ve been going through the definitive guide (which is fabulous, I ve learned a lot that I didn t know) and I m at
[Evolver] Re: Psicraft editor
2005-12-11 by rickyannotta
... I ve never heard anything bad about the M-audio 2496, I thought it was one of the most widely used cards for home studios. I did have an old MOTU
[Evolver] Re: Psicraft editor
2005-12-10 by Bernie Kornowicz
Thanks for the tip. I just happen to have one lying around and will give it a try. Bernie ... that a ... boards. ... about ... other ... check ... check ...
[Evolver] Re: Psicraft editor
2005-12-09 by altitude909
Bernie, why dont you just get a 1x1 USB midi interface? Im sure that a used one could be had for next to nothing. And Derek, It says alot about a company when
[Evolver] Re: Psicraft editor
2005-12-09 by soundtower_helpdesk
No problem; thanks for your candor. I wish you all the best. If you find another editor that works for the M-Audio Audiophile 2496 sound card I d love to hear
[Evolver] Re: Psicraft editor
2005-12-09 by Bernie Kornowicz
Hi Derek, Thanks for the reply. Looks like my Poly is set up correctly for midi, so the problem must be the soundcard. However, I m not about to go out and buy
[Evolver] Re: Psicraft editor
2005-12-09 by soundtower_helpdesk
Hi Julian/Bernie and anyone else, Normally, when responding to questions regarding Midi communication and Evolver we assume that the Evolver is setup correctly
Re: Nine Inch Evolver again ;)
2005-12-08 by dhamaryder
hey Stefan, I liked your 9-inch nails piece. I liked that lead instrument that starts around 15 seconds into it. Could you give me some idea how you made that?
Re: [Evolver] Re: Psicraft editor
2005-12-08 by mr julian
From: Bernie Kornowicz ... This is just plain retarded. everyone else can write programs that handle different MIDI ports. Especially
Re: Psicraft editor
2005-12-08 by Bernie Kornowicz
... or ... Good question. I ve had no luck with the Soundtower editor. They tell me that my M-Audio Audiophile 2496 has a bad driver, yet the Soundtower Alesis
Re: [Evolver] One more of my boring samples
2005-12-08 by peter sedin
Stefan Trippler wrote: http://www.trippler.net/files/mp3/3to50.mp3 Stefan SPONSORED LINKS Electronic instrument
One more of my boring samples
2005-12-08 by Stefan Trippler
http://www.trippler.net/files/mp3/3to50.mp3 Stefan
Psicraft editor
2005-12-08 by M Stevens
Anybody know the status of this? It was supposed to be out sometime this month, if I remember correctly. Not that I m holding my breath or anything ...
Re: Evolver problem - Freeze/loud noise
2005-12-06 by Miles Bader
... I guess there are many times where lack of manpower is a problem for a company like DSI, but the complete lack of bureaucracy definitely helps!! The other
RE: [Evolver] Re: Evolver problem - Freeze/loud noise
2005-12-05 by James Ghivizzani
I would like to add my praises to Dave. I had the problem with my evolver freezing up. I email him Sunday and within a hour I had the sysex file. Yes on a
Re: Evolver problem - Freeze/loud noise
2005-12-05 by vibert1
I had that same led prob. Dave sent me a new board, and I mailed back the old one. Excellent service, nice guy. Makes me want to support him in DSI s future
Re: Evolver problem - Freeze/loud noise
2005-12-05 by Bernie Kornowicz
I had an LED problem with my PEK about a month after I got it. DSI sent me a new circuit board very quickly and it s working fine now. Their service is
Re: Evolver problem - Freeze/loud noise
2005-12-04 by dyphase
I´ve mailed him this morning and got answer within a few hours! Yeah! Update process was successful. ... off and
Re: Evolver problem - Freeze/loud noise
2005-12-04 by Esef
You got version 3.0? Email Dave, he ll send you a sysex file which should solve it.
Re: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by dyphase
I have the same problem every now and then. Disconnecting the power supply is the only way to get it working again. Maybe I should email Dave as well ... ...
Re: [Evolver] Balanced outs?
2005-12-03 by Summa
Balanced out make sense on longer cables or an enviroment with quite some electro magnetic emissions only. Since by adding an additional inverted version of
Re: [Evolver] Balanced outs?
2005-12-03 by Andrea TONI
Opsss i forgot .. the all EMU Ultra sampler line 5000/64000/4xt have also balanced outs the Akai s6000 too ! ;-) Regards ... Andrea.TONI@esa.int
Re: [Evolver] Balanced outs?
2005-12-03 by Andrea TONI
Hello, the Jupiter6 HAS balanced out, check the manual page 2 i also open mine in the past and there is a transformer indeed ! the MKS80 also has balanced out
Re: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by Esef
Cool, i ll look into that Motu interface Vibert1. Okay, thanks to Dave Smith my problem seems to be solved! Got a .mid file with the sysex to fix the problem.
Nine Inch Evolver again ;)
2005-12-03 by Stefan Trippler
http://www.trippler.net/files/poly/eightinch.mp3 Sounds from the Evolvers, drums mainly from Stylus RMX, some additional from the Evolver, vocals from
Re: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by vibert1
Motu fastlane usb ... haven t ... comunicate
Re: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by Esef
Hi Brian, Thanks for replying. You re right! (i hope) I emailed Dave and got that info plus the sysex file within an hour :-) Still one small problem, my being
RE: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by James Ghivizzani
Es, I experienced the same thing once on my Evolver. I turned mine off and powered up and it went away. It hasn t happened again. I m glad to know I m not the
Re: [Evolver] Evolver problem - Freeze/loud noise
2005-12-03 by brian traister
There is a known issue in some 3.0 units that is easily fixed by updating the operating system with a simple Sysex file. send an email to Dave Smith and he
Evolver problem - Freeze/loud noise
2005-12-03 by Esef
Hi Everybody, I got a new Evolver last week, version 3 was on it when i got it. I m having a strange problem. Every now and then i when i just have a sequence
Re: [Evolver] Balanced outs?
2005-12-03 by Jeff Storm
my modcan modular has balanced outs and my k2500 also has balanced outs but your right not many synths have balanced outs ... From: Brooks Mosher To:
Re: [Evolver] Balanced outs?
2005-12-02 by ph@comcast.net
Casio VZ-10m? it has an XLR output at least. -pH
Re: [Evolver] Balanced outs?
2005-12-02 by ph@comcast.net
... The Kurzweil K2000-2600 has them. ... even the Emax II did this, pretty nice. best, pH
Re: [Evolver] Balanced outs?
2005-12-02 by Brooks Mosher
The Jupiter 6 might have an XLR output but it s certainly not a balanced output. I d have to agree, I don t think there are any synths with balanced outs. Even
Re: [Evolver] Balanced outs?
2005-12-02 by moose
... isn t it? ooo, i ll have to investigate! ... the recent emu s have that nice feature of using balanced cables to run audio out & back in to the unit, so
Re: [Evolver] Balanced outs?
2005-12-02 by Ravi Ivan Sharma
not balanced. I don t know of any synths actually that have balanced outs. ... From: altitude909 To: DSI_Evolver@yahoogroups.com Sent: Thursday, December 01,
Re: [Evolver] Balanced outs?
2005-12-02 by moose
... the JP6 has an xlr output! if you need balanced outputs then simply get a nice stereo DI box (or 2 monos) & run very short audio cables from the synth
Re: Midi out.
2005-12-02 by Miles Bader
... You have to set the sequencer destination to the MIDI Note Out dest -- normally it s set to something like Osc All Freq or whatever. Each of the 4
Balanced outs?
2005-12-01 by altitude909
Does the Evo have them?
[Evolver] Re: Soundtower Update
2005-12-01 by rickyannotta
Played around with the new version last night. I feel I have hands on control of this beast for the first time! Whether I decide to edit from the Remote, the
Midi out.
2005-12-01 by antunderground
Hi. Two days ago i bought a second hand evolver for 250 euros. It has been updated to v.2.0. I cannot sent midi notes to my Kurzweil K2661. I set an arpegiator
[Evolver] Re: Soundtower Update
2005-12-01 by rickyannotta
Okay got it! I needed to activate the keyboard setting in the editor. It always these littlest thing... Thanks
Re: [Evolver] evolver question for the pros
2005-12-01 by aaron_bliss
Thank you very much, I was wondering when that was going to be out! thank you, Aaron ... sound!!! ... quick ... jump ... the main ... that ... manner.
Re: [Evolver] Re: Soundtower Update
2005-11-30 by Stefan Trippler
... That s my setting too. Works perfectly. ... From: altitude909 To: Sent: Wednesday, November 30, 2005
[Evolver] Re: Soundtower Update
2005-11-30 by altitude909
Sounds like your routing may be at issue. I use the 3.0 software with my Remote 25 and the CC s work perfectly (in fact I am using the template offered here).
[Evolver] Re: Soundtower Update
2005-11-30 by rickyannotta
Stephan - thanks for your insight. The thing is, if the editor is responding to Evolver s front panel (in realtime), then echo d cc# s should logically be
Re: [Evolver] Re: Soundtower Update
2005-11-30 by Stefan Trippler
Rick, the controller thing works for me, values in the editor are updated as well as in the Evolver if I turn knobs on my BCR2000. Maybe the problem is in your
Re: Soundtower Update
2005-11-30 by rickyannotta
Okay - contacted soundtower...wait & see what happens. In the meantime if anyone has tested the editor responding to CC# s automatically let me know. I would
Re: [Evolver] question about PEK
2005-11-30 by Tony Scharf
I am considering getting the editor for my PEK simply because of its librarian functions. I dont know how good its librarian functions are, but just being