Yahoo Groups archive
Messages
Page 125 of 168 · 8362 messages matched
2004-08-13 by Paul.Maddox.Mail-list@Synth.net
Bleep, > yup, it's on a header and the PSU *is* center positive... is it really > that simple? just flip the header around? geez... Just a thought, is the power supply outputting DC or AC? Not all 'Wall warts' output DC. I can't see how you're getting -9v on the diode. Paul
2004-08-12 by blip
On Thu, 12 Aug 2004, Colin f wrote: > Sounds like you just have the polarity wrong. > Did you use a 3 pin header for the power input, or wire it directly to > the board ? > If it's on a header, just try swapping the pins round. > > BTW normal wiring is centre negative... yup, it'
2004-08-12 by Colin f
> if i'm right, is there a way to rewire the power jack instead > of getting a > new supply? i'd really rather not buy more parts at this point... Sounds like you just have the polarity wrong. Did you use a 3 pin header for the power input, or wire it directly to the board ? If i
2004-08-12 by blip
*sigh* still, i'm having the same problem as long ago... i get voltage into D6, and then it stops... only a trickle comes out the other end. i have two theories as to waht is going on... either i have the wrong part in there (50V 1A rectifier), or my powersupply is not actually t
2004-08-11 by Colin f
> colin... could you develop a wireless neural interface for > the P3 so that > i never have to stop using it? that'd just be an OS update, yes? :) If we could tap directly into our aural cortex, we wouldn't need sequencers. Just imagine the music, and it would be captured onto h
2004-08-11 by Peter Lunnon
Well I don't know about anybody else but my imagination frequently needs a good hard kick and there's nothing like aimlessly poking about with few knobs, buttons and switches to do it. Well that and, ahem, more 'traditional' stimulants of course. > If we could tap directly into o
2004-08-11 by blip
the last parts arrived today... if all goes well, P3 #41 should be operational this evening... colin... could you develop a wireless neural interface for the P3 so that i never have to stop using it? that'd just be an OS update, yes? :) bleep. out. --- http://leichenfeld.iuma.com
2004-08-09 by MAG
thanx guys the melodys, the basslines and the deep hats are played by the p3 (80% of the song), recorded to several audio files which are (i'm sorry:-) arranged... the other drums are synced by the korg, played live during whole track record. the instruments incl. cutoff, reso, l
2004-08-09 by implode7@comcast.net
Gene's been silent because he bought a new Mac a couple o'weeks ago, and he has been simultaneously learning 500 different programs....Numerology is cool, btw. -------------- Original message -------------- > On Sun, 8 Aug 2004, MAG wrote: > > > Ditto - let's have more! Come on g
2004-08-09 by blip
On Sun, 8 Aug 2004, MAG wrote: > Ditto - let's have more! Come on gang, someone must be spewing forth > some stuff? i nominate gene... he's been silent lately, which i attribute to cranking out the banging tunes on his P3, heh... you will hear from me soon... as my final parts ar
2004-08-09 by Colin f
> here a little P3 demo song Nice. Is that all run from p3, or are you arranging stuff elsewhere ? I guess there could be a synced up drum machine at least... > (also made under influence of some good swiss weed....;-) Is that the stuf with the holes in the leaves ? ;-) One of th
2004-08-09 by Paul Nagle
On Sun, 8 Aug 2004 23:38:25 -0700 (PDT), MAG wrote: >yep, > >here a little P3 demo song >(also made under influence of some good swiss weed....;-) > >http://www.magdesign.ch/SeqForm/(www.magdesign.ch)_LoveMySequencer.mp3 > >have fun I certainly did - this is brilliant!!! More ple
2004-08-09 by MAG
yep, here a little P3 demo song (also made under influence of some good swiss weed....;-) http://www.magdesign.ch/SeqForm/(www.magdesign.ch)_LoveMySequencer.mp3 have fun magD. Paul Nagle wrote: Ditto - let's have more! Come on gang, someone must be spewing forth some stuff? Paul
2004-08-08 by Paul Nagle
On Sun, 08 Aug 2004 19:17:57 -0000, "discointellect" wrote: >Fascinating stuff! Incidentally what happened to P3_Stoned33 - >P3_Stoned36? So stoned you forgot to upload them? ;) Well, I didn't think they really added much or demonstrated anything cool. And the really, really good
2004-08-08 by discointellect
--- In analogue-sequencer@yahoogroups.com, Paul Nagle wrote: > Heyup guys, > > been a while since I bored you with a new P3 sequence but today is the > day. > > http://deepbass.demon.co.uk:81/Paul/mp3/ > > This one is called P3_Stoned37.mp3 and is made using the following > cool
2004-08-08 by Gene Schwartz
> On Sat, 7 Aug 2004 15:14:51 -0700, Mark Hamburg > wrote: > >> What's the instrumentation? Was this all played by the P3? >> > > With some drums by the Korg ESX1. But the P3 was playing a Supernova 2 > and a Vermona Perfourmer. Did something even cooler later.... > > Paul Damn -
2004-08-07 by Paul Nagle
On Sat, 7 Aug 2004 15:14:51 -0700, Mark Hamburg wrote: >What's the instrumentation? Was this all played by the P3? > With some drums by the Korg ESX1. But the P3 was playing a Supernova 2 and a Vermona Perfourmer. Did something even cooler later.... Paul --- Paul Nagle / Soft Roo
2004-08-07 by Mark Hamburg
What's the instrumentation? Was this all played by the P3? Mark
2004-08-07 by Mark Pulver
blip (09:51 AM 8/2/2004) wrote: >my case arrived today... And I got mine on Tuesday! (I've been off the 'net for a few days) THANK YOU COLIN! YAYAYAYA!!!!!!!!! Mark
2004-08-07 by Paul Nagle
Heyup guys, been a while since I bored you with a new P3 sequence but today is the day. http://deepbass.demon.co.uk:81/Paul/mp3/ This one is called P3_Stoned37.mp3 and is made using the following cool trick: First make a groovy sequence in a muted track. Then get the other tracks
2004-08-07 by Colin f
Hi Allan, > I haven't built a front panel for it yet, however one feature I > would like to add are some extra midi outs, so that I have four > rather than one, to save having to use a separate midi thru unit or > keep swapping midi leads. > > I know it isn't as simple as just ho
2004-08-07 by allanjhall
Hi All, Recently built my P3 and it worked perfectly on power up :-) Great job Colin!, I find the user interface very intuative too, much easier than Doepfer Schaltwerk (anyone want to buy one?) hehe. I haven't built a front panel for it yet, however one feature I would like to a
2004-08-05 by MAG
tzzzzz... i tried a hundred times to hit play for leaving rec.... simplicity... thanks! Colin f wrote: > i'm wondering if there is a possibility to leave the rec modus without > stopping the sequencer. Just press REC again ! Cheers, Colin f _______________________________________
2004-08-04 by Colin f
> correct me if i'm wrong, but the only thing you *can't* do while the > sequencer is running is send/receive sysex dumps... this is half the > reason i'm such a huge P3 nut... it refuses to get in the way of one's > making music. Actually you can send sysex dumps while it's runn
2004-08-04 by blip
On Wed, 4 Aug 2004, Colin f wrote: > > i'm wondering if there is a possibility to leave the rec modus without > > stopping the sequencer. correct me if i'm wrong, but the only thing you *can't* do while the sequencer is running is send/receive sysex dumps... this is half the reas
2004-08-04 by Colin f
> i'm wondering if there is a possibility to leave the rec modus without > stopping the sequencer. Just press REC again ! Cheers, Colin f ________________________________________________ Message sent using UebiMiau 2.7.2
2004-08-04 by MAG
hi colin i'm wondering if there is a possibility to leave the rec modus without stopping the sequencer. grz mag --------------------------------- Do you Yahoo!? Yahoo! Mail is new and improved - Check it out! [Non-text portions of this message have been removed]
2004-08-02 by blip
oops... obviously didn't notice it wasn't private... heh... apologies. On Mon, 2 Aug 2004, blip wrote: > Hi Dave... > > I wanted to test the chips to make sure they worked, and I think the last > time we spoke you weren't in a hurry... Anyway, I had some problems with > a fuse an
2004-08-02 by blip
Hi Dave... I wanted to test the chips to make sure they worked, and I think the last time we spoke you weren't in a hurry... Anyway, I had some problems with a fuse and diode on my P3 and have slacked remedying them to test memory chips... with the arrival of my case, slacking en
2004-08-02 by colinfraser_com
Folks, I've uploaded a new version of the bill of materials. Aside from the discontinued 74HC241 at Rapid, and fixed part number for the PLED display module, I've also changed R25 on the main board from 22k to 10k. This increases the current the transistor driving the mode LEDs c
2004-08-02 by blip
my case arrived today... compositional bliss is imminent! *drooling grin* bleep. out. --- http://leichenfeld.iuma.com http://thirdwavecollective.com
2004-08-01 by colinfraser_com
Just back from a pleasant weekend in Cambridge... Gert now has his big one, so I uploaded a new photo to the gallery page to show the finished unit... http://www.colinfraser.com/p3/gallery.htm There are some photos from the SDIY weekend here: http://www.techman.synth.net/techman_
2004-07-29 by Colin f
> i'd prefer to be able to set a range of 1-10 octaves instead of the 4 > range possibilities given now. > also, when a C is set as base note the > ranges appear to run up for [x] octaves and a bit. i'd prefer them to > run up for full octaves, so with a base-note C (full left) f
2004-07-29 by ch.³l
hi Colin, > v3.963 (in files now) adds a few small things... > > The note range covered by the knobs in pattern edit is now > configurable for any base note and four different ranges. i'd prefer to be able to set a range of 1-10 octaves instead of the 4 range possibilities given
2004-07-29 by Colin f
> i tested the fts function, but probably i didn't get that: > is it possible to set the note range for each pattern like min. c1 to > maximum c4 (between all notes possible) or something? Not with FTS no - it just forces notes into the defined scale in the original octave. I'm p
2004-07-29 by MAG
hi everyone for using the p3 with logicpro its importand to set midi clock send on both sequencers to off. then it works pretty fine (no double tempo and sync trouble stuff). scale question: ***************** i tested the fts function, but probably i didn't get that: is it possib
2004-07-28 by Paul Maddox (Mail Lists)
Colin, > I got the front panel in today for a no-expense-spared custom P3. > As Benny Hill once said, "I like 'em big"... > http://www.colinfraser.com/p3/gallery/gerts-big-one.jpg sh1t..... How big is that thing!!! Paul
2004-07-28 by philsmillie@yahoo.com
Good news folks.... P3 #32 has finally been dragged, kicking and screaming into the world. After a bit of prodding, poking, replacing an o/c resistor and sacrificing a couple of chickens, #32 fired up and is getting along famously with some of it's new playmates in the studio :-)
2004-07-28 by Colin f
> just found this on logics homepage: > Description: > A device synced to Logic with MIDI Clock runs at double speed. > Explanation: > MIDI Clock Data is being sent twice. This happens if there is a MIDI feedback loop in the system. > so colin, lay back, its a problem with logic!
2004-07-28 by MAG
just found this on logics homepage: Description: A device synced to Logic with MIDI Clock runs at double speed. Explanation: MIDI Clock Data is being sent twice. This happens if there is a MIDI feedback loop in the system. Solution: 1. Go to the synchronization window, and set th
2004-07-28 by MAG
hi, there is no midi instrument generated in the environment. just the midi input routet via a chanel splitter to 8 audioinstruments. when i shut my apple down and connect my korg electribe midi out with the p3 it works fine. gonna try to check if i can switch in logic midi thru
2004-07-27 by Colin f
Think this was meant for the list... -----Original Message----- From: meadowfield1 [mailto:mark.smith@pace.co.uk] Sent: 27 July 2004 5:44 To: analogue-sequencer-owner@yahoogroups.com Subject: Re: sync troubles Hi, > there is just a problem with the sync, if i start the sequencer
2004-07-27 by philsmillie@yahoo.com
> Anyone else having sync trouble with Logic ? Not yet but i'll be investigating all Logic / P3 issues very shortly!! Well... as soon as my newly revived CPU arrives back... Thanks Colin! There may be midi routing issues going on here.. depends what's happening in the environment
2004-07-27 by Paul Nagle
On Tue, 27 Jul 2004 04:57:10 -0700 (PDT), MAG wrote: >(paul, i cant use it as a master because logic is trying to sync and the tempo is then >evertime switching up and down....however thats normal) Yeah, it shows the tempo going up and down because it has no real idea when the ne
2004-07-27 by MAG
okay, thats a good idea! will try this tonight. Paul.Maddox.Mail-list@Synth.net wrote: Hi, > You might try syncing to the Korg drum machine instead just as a test. Just a thought, but the old Korg drum machines used to need 48PPQN to sync to, I wonder if this is whats happening?
2004-07-27 by MAG
no, when i restart its not real in time. (paul, i cant use it as a master because logic is trying to sync and the tempo is then evertime switching up and down....however thats normal) does the p3 only works with midi clock, or could i use mmc, mtc? there i can also switch the fra
2004-07-27 by Paul Nagle
On Tue, 27 Jul 2004 02:41:52 -0700 (PDT), MAG wrote: >there are no such problems with my korg drumcomputer. probably someone have the same problem. an idea? You might try syncing to the Korg drum machine instead just as a test. I always use the P3 as master so have never synced i
2004-07-27 by Paul.Maddox.Mail-list@Synth.net
Hi, > You might try syncing to the Korg drum machine instead just as a test. Just a thought, but the old Korg drum machines used to need 48PPQN to sync to, I wonder if this is whats happening? Could Logic be set to send 48PPQN midi clock? Paul
2004-07-27 by Colin f
> there is just a problem with the sync, if i start the sequencer (logicaudio)on my computer, > the p3 starts with double speed, i everytime have to stop it and start again while > my logicsequencer is still running. > is there probably i wrong system setting on my p3 or is 'coz
2004-07-27 by MAG
so, i realy like the p3! http://www.magdesign.ch/SeqForm/environment.jpg there is just a problem with the sync, if i start the sequencer (logicaudio)on my computer, the p3 starts with double speed, i everytime have to stop it and start again while my logicsequencer is still runni