gsp 2101
2003-09-14 by caelin
hello thanks :) i,m just in possesion of a digitech gsp 2101 ... and like to know everything of it grtzz caelin
Messages
Browse messages
Page 38 of 45 · 2224 messages matched
Re: [gsp-2101] 2101 and ground control switcher
2003-09-12 by Brian C. Hansen
I m not familiar with the Ground Control. If this is a MIDI based controller it should work fine, but remember that it won t have the same response time for
2101 and ground control switcher
2003-09-12 by graham
i dont have a Control one yet, but i saw a ground control pretty cheap would you buy one for switching? i have a pod, a sdd 2000, and a 2101 i d like your
Re: [gsp-2101] 2101 and foot board
2003-09-11 by Brian C. Hansen
The C1FC, as far as I know, will work with all the units. You probably want to see if you can get your hands on the Artist firmware upgrade. I like what they
Re: [gsp-2101] shimmer help with a 2101
2003-09-11 by Brian C. Hansen
Hello Graham, If you d like, I can email you a copy of the manual. I ve got it in both .PDF format, as well as an ASCII text version with a bit more
Re: [gsp-2101] 2101 and foot board
2003-09-10 by chuc653311@aol.com
Of course it will..
2101 and foot board
2003-09-10 by graham
hi there i just got a 2101 and really like it will the control one footboard work withall 2101 s, or only with some? my unit appears to be a plain 2101 (not
shimmer help with a 2101
2003-09-09 by graham
hey there i just got a 2101-and without the manual which i will downlaod at work...i am flying blind. i bought mostly for shimmer and figured that the preamp
Re: [gsp-2101] help with new 2101
2003-09-06 by chuc653311@aol.com
i can answer both of your questions. A. press the utility button and a display will come up on the bottom right hand of the screen you will see a arrow press
help with new 2101
2003-09-06 by graham
hi there my 2101 arrived yesterday i want to know a couple of quick things i think a) how do i do a factory restore of original patches? b) in terms of the
Re: [gsp-2101] Re: received bad data in system dump
2003-09-02 by Graham Pearson
Hi Rainer: A couple of years ago, I tried writing a Windows-based program that retrieved system dumps from the GSP 2101. I noticed that most PC s had trouble
AW: [gsp-2101] Re: received bad data in system dump
2003-09-02 by Schnaidt Rainer
Thanks a lot, Marko, for your hints. I’ll try that immediately… By the way, I found the dumpster program on the following site:
Re: [gsp-2101] Re: received bad data in system dump
2003-09-02 by marko.menart@yahoo.com
I had the same problem, when I was using Martin Ecker s Patch Dumper under WindowsXP (under Windows 98 everything was OK). I solved problem by changing the
Re: received bad data in system dump
2003-09-01 by rene1711
I am using Sysex Solution V2.1 but tried also the dump program of Martin Ecker. The effect is always the same (as described). Yesterday I found out, that it is
RE: [gsp-2101] received bad data in system dump
2003-09-01 by MM
Been a while since I ve done it but go to the view menu View sysx Then click the receive bank button (look like an arrow pointing downward in cakewalk 9) A
RE: [gsp-2101] received bad data in system dump
2003-08-31 by Al Costa
I m new to this Sysex stuff, too. How do you use Cakewalk to perform the back-ups? Explain it step-by-step cuz I ain t got a clue. Thanks, --AL
RE: [gsp-2101] received bad data in system dump
2003-08-30 by MM
What programs are you using? I have used cakewalk with no problems at all, but then I used a P200. Mark ... From: rene1711 [mailto:rainer.schnaidt@fhso.ch]
received bad data in system dump
2003-08-29 by rene1711
I got a gsp 2101 LE three weeks ago - and i am a new member in this group. I am happy with the sound and possibilities of this device and worked a lot to
Re: [gsp-2101] 2101 & TriAxis
2003-08-27 by Al Costa
Okay, cool, and again, thank you so much for you help. On Tue, 26 Aug 2003 18:20:58 -0700
Re: [gsp-2101] Buggy 2101..
2003-08-27 by rlvasconcelos@bol.com.br
Hi, My GSP2101 Studio Tube done the same in the last months. The old battery was problem of that bug. Try to put a new battery. So long! ... From: Spagork !
Re: [gsp-2101] Buggy 2101..
2003-08-27 by Spagork !
My 2101 is circa 95 and yes it s the same old battery and still works fine also. But if your having problems, then a simple battery swap might cure it. A bad
Re: [gsp-2101] 2101 & TriAxis
2003-08-27 by Tod Brueske
Sorry, 2101 MIDI out to Triaxis MIDI in. That s all you need for what you want. This way the 2101 is controlling the Triaxis.
Re: [gsp-2101] Upgrade on dieter s site?
2003-08-27 by Graham Pearson
Dieter: I wish your messages weren t so long ! Graham ... From: Dieter Waechter To: gsp-2101@yahoogroups.com Sent: Tuesday, August 26, 2003 12:13 PM Subject:
RE: [gsp-2101] 2101 & TriAxis
2003-08-26 by MM
Tod, Thanks for the mini tutorial. Good stuff. Mark ... From: Tod Brueske [mailto:tbrueske@king5.com] Sent: Monday, August 25, 2003 2:03 PM To:
Re: [gsp-2101] Upgrade on dieter s site?
2003-08-26 by Dieter Waechter
Hi! ... From: Aaron Miller To: gsp-2101@yahoogroups.com Sent: Tuesday, August 26, 2003 2:10 AM Subject: [gsp-2101] Upgrade on dieter s site? Hey dieter? Are
Re: [gsp-2101] 2101 & TriAxis
2003-08-26 by Al Costa
That s all great stuff and I ll do it but what plugs into what in the back? I m confused about In, Out & Thru. On Mon, 25 Aug 2003 14:02:44 -0700 Tod Brueske
Re: [gsp-2101] Buggy 2101..
2003-08-26 by marko.menart@yahoo.com
Well... My GSP 2101 is from August 95 with original battery and still works perfectly well... And it runs almost everyday. Regards, Marko ... Do you Yahoo!?
Upgrade on dieter s site?
2003-08-26 by Aaron Miller
Hey dieter? Are you planning on updating your site? I m just curious cause some of the upgrades sound interesting but every link is under construction... Cool
Re: [gsp-2101] 2101 & TriAxis
2003-08-25 by Tod Brueske
Actually you don t need to do that. Here s what you do do. You need to set up the TriAxis to receive on a MIDI channel, let s say channel 1. First determine
Buggy 2101..
2003-08-25 by J. E. Simons
upgrade it.. just do it, you ll be happier with it.. make sure that you reseat your tubes, replace the coin battery with a new one (i think that this is your
Re: [gsp-2101] My GSP 2101 is buggy
2003-08-24 by Brian C. Hansen
Before I start off, please remember to be careful when working on tube-based equipment. The voltage levels are much higher, and if not careful, they can kill.
My GSP 2101 is buggy
2003-08-24 by Aaron Miller
I have a gsp-2101 studio version 1.06.06. I am starting to play out with it and it is giving me major problems...The parameters are not the way i saved them
Re: [gsp-2101] 2101 & TriAxis
2003-08-24 by Al Costa
Yes, that is my understanding from the manual.
Re: [gsp-2101] 2101 & TriAxis
2003-08-23 by Tod Brueske
Are you able to assign the Triaxis patches to different MIDI patch change numbers. In other words, can you tell it to go to patch # 8 when it receives a #9
2101 & TriAxis
2003-08-20 by Al Costa
Hey All, I got myself a TriAxis and this is what I want to do with it. I want to use the 2101 as my controller (with C1 pedalboard). I want to plug my guitar
Re: [gsp-2101] string volume swell and "shimmer"
2003-08-19 by Spagork !
The string volume swell patch was on there before I upgraded my bare bones basic 2101 up to the Full Blown Artist. So,... Yes. Every single Sdisc 2101 out
string volume swell and "shimmer"
2003-08-17 by graham
hi there i am just about to buy a 2101 and i was wondering is the string volume swell patch found on all 2101 s not just on 2101 artist, or other versions??
RE: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-12 by MM
I m not in the market for one at the moment as tempting as it is. What do they go for these days.US$450-500? 2 on ebay for $300+ w/ controller right now. Also
RE: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-12 by Jorge
How much for one in excellent condition plus two extra chips that I never installed. I m not selling it for a giveaway price so don t dream please. Also, let
Re: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-11 by Brian C. Hansen
What about the Genesis 3? From what I understand, it s more for studio work, and if you wanted to use it for live work, you d need the external foot
RE: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-11 by MM
I looked at it on the website. The GNX3 s selling point is ease of use probably at the expense of flexibility. I rather like being a sound engineer :-) Also
Re: [gsp-2101] What happend to bstage.com?
2003-08-11 by Brian C. Hansen
Hi Steve, From what I m being told, bstage.com no longer has access to the internet. I believe that something else might be in the works, but I m not sure. ...
What happend to bstage.com?
2003-08-11 by verderacer
Hello All, Does anybody know what happened to bstage.com? I have not been able to get to any to of the archives. Regards, Steve
RE: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-10 by Jorge
If you don t mind a combination effects processor inside the foot pedalboard itself, the Roland GT-6 is hard to beat. The only problem, which I also had with
Re: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-10 by Brian C. Hansen
Have you looked at DigiTech s GNX3? I haven t had a chance to try one yet, but I know my local dealer can t keep them in stock. ... From: MM To:
RE: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-09 by MM
Hi all, Is it just me or are times bad for effects processors? Seems like no one makes a decent inexpensive unit any more. Local music shops are depressing. My
Re: [gsp-2101] Re: Using an ART x-15 ultrafoot
2003-08-05 by KD5UJP@AOL.COM
Hey, I think you have me confused with someone else. My name is Brad and I am a member of the 2101 group. A funny coincidence though as I happen to own an
Re: Using an ART x-15 ultrafoot
2003-08-05 by ruedigermartin
Hi Aaron, you could use the second pedal on your X-15 ultrafoot, and programm the controls you need for switch on in one direction and switch off in the
Re: [gsp-2101] Re: Software 3.00 Blow Out!
2003-07-25 by KD5UJP@AOL.COM
Hey Dieter, do you happen to know a 2101 patch editor that works with win 2000, i downloaded the 1 i saw on the web and it didn t work. generates errors Any
Re: Software 3.00 Blow Out!
2003-07-25 by jojopuss
Dieter, Are any of these still available? TIA. JB