Re: Matrix 6R Spillover vs. Matrix 1000 Group Mode
2010-11-14 by fylthymcnasty
Thanks man, that was exactly what I was afraid of... which is pretty useless, rarely would anyone want to actually play 12 notes at once, but switching chords
Messages
Browse messages
Page 32 of 51 · 2518 messages matched
RE: [oberheim] Matrix 6R Spillover vs. Matrix 1000 Group Mode
2010-11-14 by LarryS
irrespective of all the spillover and sound concerns, if you have a 6R, then you probably oughta add a 6R just to keep things alike and interchangable. On a
Re: Matrix 6R Spillover vs. Matrix 1000 Group Mode
2010-11-14 by bernard.escaillas
Hello, I think the spillover won t work in the way you expect. Actually, i have not tested it myself since i only have one M-6R and one M-1000 (poor me ;) But
RE: [oberheim] Matrix 6R Spillover vs. Matrix 1000 Group Mode
2010-11-14 by Nicole Massey
I may be completely mistaken about this, but this is how I remember voice allocation working on the 6r. When you play a note, and then repeat that same note
Matrix 6R Spillover vs. Matrix 1000 Group Mode
2010-11-14 by fylthymcnasty
Hello, I am a new Matrix 6R owner, and I want to expand it to 12 voices by adding another unit. I have read that the 6R and 1000 sound slightly different
Re: expression pedal for Matrix 6
2010-11-09 by steinbergerstyler
i think there are actually some relatively cheap cv pedals out there, behringer makes one in the $30 range.
Re: expression pedal for Matrix 6
2010-11-08 by tacitron
I can second steinbergerstyler from my experience over the weekend. I noticed my sequencer was receiving Volume Control messages with a value of 0, coming
RE: [oberheim] looking for info about OB-1 / FVS cassette interface and OB-1 calibration procedure
2010-11-05 by synthwalker
Thanks Paul, Of course this will help Regards Eric _____ De : oberheim@yahoogroups.com [mailto:oberheim@yahoogroups.com] De la part de Paul J. White Envoyé :
Re: expression pedal for Matrix 6
2010-11-05 by Andrea TONI
No ! you are wrong both KBD and rack of the matrix6 have 2 pedals input both of them, read the manuals carefully
Re: expression pedal for Matrix 6
2010-11-04 by steinbergerstyler
yeah, looking on the web a bit you are right, I was under the impression expression pedal=cv pedal, but cv pedals are active. Are there any manufacturers still
Re: [oberheim] looking for info about OB-1 / FVS cassette interface and OB-1 calibration procedure
2010-11-04 by Paul J. White
I have a schematic available here: http://www.electrongate.com/obfiles/cass-1.jpg Hope this helps. -- Paul White ... I have a schematic available here:
looking for info about OB-1 / FVS cassette interface and OB-1 calibration procedure
2010-11-04 by synthwalker
Dear venerable OB users, I’m looking for any info / schematics about the OB-1 / FVS memory cassette interface module for a retro engineering project. I’m
RE: [oberheim] Re: expression pedal for Matrix 6
2010-11-04 by Nicole Massey
Okay, if it s a TS plug then we re very probably talking about a CV pedal instead of an expression pedal. I would suggest the trick I mentioned earlier to
Re: expression pedal for Matrix 6
2010-11-04 by steinbergerstyler
I plugged a Yamaha FC7 into the Pedal 1 jack--the Matrix 6 senses it and will transmit the appropriate CC# via midi to my computer but only for value 0-14
Re: expression pedal for Matrix 6
2010-11-04 by tacitron
... Yeah, the Matrix 6 keyboard has both. According to the manual, pedal input #2 is a momentary pedal / switch pedal. It also functions as a trigger input.
Re: [oberheim] Re: expression pedal for Matrix 6
2010-11-04 by Paul Cunningham
if it doesnt take a cv pedal it takes a regular switch like a sustain pedal. it has to be programmed into the modulation matrix to work. it usually does
Re: CEM3374 VCO and CEM3372 VCF/VCA chips available
2010-11-04 by synthparts
I have a few more of these chips in stock now. Thanks, Doug synthparts.com
New file uploaded to oberheim
2010-11-03 by oberheim@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the oberheim group. File : /Matrix
Re: expression pedal for Matrix 6
2010-11-03 by tacitron
... According to the manual, page 10: Pedal #1 is the continuous / volume ( rocker-style ) pedal input. Someone on the list was correct: in order for the
Re: [oberheim] Re: expression pedal for Matrix 6
2010-11-02 by Paul J. White
You might try a pedal with a 50K pot. I seem to remember this was the standard Oberheim pedal.
Re: expression pedal for Matrix 6
2010-11-02 by steinbergerstyler
No, the keyboard has two pedal inputs, unlike the rack. Third try.
RE: [oberheim] Re: expression pedal for Matrix 6
2010-11-02 by LarryS
Sorry, I can t. I had always thought that the keyboard was exactly the same as the rack. EXACTLY. Same elex.. just had a keyboard strapped on. As was the
Re: expression pedal for Matrix 6
2010-11-02 by steinbergerstyler
Is anyone able to answer my original question? I have a Matrix 6 KEYBOARD-not rack. It has a pedal input. What type of pedal is required for this? Will a
RE: [oberheim] Re: expression pedal for Matrix 6
2010-11-02 by Nicole Massey
Well, there is a way to work around that. Take a quarter phone jack and solder to it a standard 9 volt power connector. Attach a 9 volt battery to it and plug
RE: [oberheim] Re: expression pedal for Matrix 6
2010-11-02 by LarryS
I m not proposing this, I m saying it s the only way to do it that I ve ever heard of. If you want midi input of volume, whether it by pedal, sequencer, or
Re: [oberheim] Re: expression pedal for Matrix 6
2010-11-02 by atmospherics4@gmail.com
I m still confused about this process.....you are proposing giving up VCA number two, which would be routed to be controlled by CC#7..is there a block
Re: expression pedal for Matrix 6
2010-11-02 by steinbergerstyler
I actually want to use the built-in CV pedal input to control CC #2--according to the manual this can be done...anyone?
RE: [oberheim] expression pedal for Matrix 6
2010-11-02 by LarryS
The M6R does not respond to CC 7 or midi volume like the Matrix 1000 does. This is the chief reason I could not get rid of my M6R fast enough. Great machine.
Re: [oberheim] expression pedal for Matrix 6
2010-11-01 by atmospherics4@gmail.com
I have the same problem...I have never been able to get an expression or volume pedal to work on the matrix 6R.....I don t know how to patch it and control It
expression pedal for Matrix 6
2010-11-01 by steinbergerstyler
Can anyone recommend an expression (CC) pedal to use with the Matrix 6? Will a standard expression pedal like the Yamaha FC7 of M-Audio EX-P work or does it
Re: WTB: Oberheim OB-Mx voice card (help with serial numbers?)
2010-10-18 by Bakis Sirros
hi lists, found two OB-Mx 2voice cards, probably for sale.... their serial numbers are: voice boards vc073088 and vc073687 case serial no of the machine
WTB: Oberheim OB-Mx Voice Card
2010-10-16 by Bakis Sirros
hi list, WTB Oberheim OB-Mx Voice Card for my OB-Mx. please contact me off-list. thanks, best regards, Bakis. Bakis Sirros - Parallel Worlds / Interconnected /
Re: [oberheim] Re: How old's my OB-X?
2010-10-11 by chriswareham@chriswareham.demon.co.uk
... I m borrowing a decent digital camera from work, so I ll take some shots of the Obie from each side, close ups of the makers label, and shots of the
Re: How old's my OB-X?
2010-10-11 by synthparts
Great, thanks! Please take some internal pics too if you can. If you want I could host the pics on my site. I m pretty sure those really early OB-Xs had a
Re: How old's my OB-X?
2010-10-11 by synthparts
Great, thanks! Please take some internal pics too if you can. If you want I could host the pics on my site. I m pretty sure those really early OB-Xs had a
Re: [oberheim] Re: How old's my OB-X?
2010-10-10 by Chris Wareham
Hi Doug, Attached are a couple of pictures - unfortunately they are quite grainy as the only digital camera I have is the one on my mobile phone, but hopefully
wanted OBX
2010-10-09 by synthwalker
Hi folks, Sorry this last OBX post makes me GAS here :-) I’m looking for an 8 voice OBX in lovely shape. That means I’ll give lovely money for it. Regards,
Re: How old's my OB-X?
2010-10-09 by synthparts
That is an early one. From 1979. Can you take a pic? Doug
How old's my OB-X?
2010-10-08 by Chris Wareham
Hi folks, Many thanks to the people who helped out with WAV files of the factory presets a few months back. I m now trying to work out how old my OB-X might
OB-MX service
2010-09-27 by Erik
I need to get a new power supply for my OB-MX 8 voice. Any suggestions for a good service center in Los Angeles?
Marion Systems MSR-2 & ASM Sysex Documentation
2010-09-15 by prosynth@ymail.com
http://feldkir.ch/marionsystems.htm Share and enjoy!
Re: Re: Re: [oberheim] Re: M6r troubles
2010-09-13 by analog gear
oops, i see he has both. yes i know it s the same (although people often claim they sound a bit different!), i just wanted to point out they are not DIRECTLY
R: Re: Re: [oberheim] Re: M6r troubles
2010-09-13 by ste.mari@libero.it
See his web page he sell the two types: http://www.maad.net/ms6/ anyway Its exactly the same Ic in the two format,a friend of mine mounted a wide body on a
Re: Re: [oberheim] Re: M6r troubles
2010-09-13 by analog gear
are you sure? afaik, this guy sells NARROW bodied 3396 chips only. they go into matrix-1000. m6r requires WIDE body 3396 chips, make no mistake. wide-body
R: Re: [oberheim] Re: M6r troubles
2010-09-13 by ste.mari@libero.it
In case you can buy a new CEM 3396 here : http://www.maad.net/ms6/ This makes sense to me...I ll it and let you know. Sent via BlackBerry from T-MobileFrom:
Re: [oberheim] Re: M6r troubles
2010-09-12 by atmospherics4@gmail.com
This makes sense to me...I ll it and let you know. Sent via BlackBerry from T-Mobile ... From: synergeezer Sender:
Re: M6r troubles
2010-09-12 by synergeezer
Try re-seating the chip or chips. IIRC many of them are socketed, so, CAREFULLY, unplug each one and, CAREFULLY, plug it back in (don t bend the legs)! I
Re: [oberheim] Re: M6r troubles
2010-09-10 by atmospherics4@gmail.com
this sounds vague to me as I don t know about electronics...are you saying that if I were to open the M6r, that I would find a discreet chip labeled for each
Re: need replacemetn switches and encoder for Matrix - 12
2010-09-10 by intellijel
Still looking for these. I know they are alps and obsolete. No one knows anything? They are very unusual looking and the pins are labelled in this order C A B
Re: M6r troubles
2010-09-10 by eightiescrisis
pull out the chip!