Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-24 by Ravi Ivan Sharma
Sequencers that are both sequencers and sound modules should be able to ignore start, stop and continue messages but still see clock and on offs and other
Messages
Browse messages
Page 138 of 144 · 7159 messages matched
Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-24 by mr julian
... these are both very different instruments to the evolver. ... OK. well, I think (working on memory here as I don t have the evo with me at work) there is a
Re: OF MIDI Clock and insistent sequencers
2002-12-23 by jpyn8 <jp1@comcast.net>
... recording ... DAW ... What software are you using? I wonder if it is capable of setting up a MIDI Filter that would block such messages from being sent to
Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-23 by drK
... Yes this was my first attempt but since it is a patch parameter when you recall another patch it may or may not be set accordingly. so it isn t great if
Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-23 by drK
... Well this was big enough issue with the Triton series that they explicitly disable MIDI START when using the Triton as a tone module. Sequencer integrated
Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-23 by mr julian
... This is how all hardware sequencers work, right? you press play on the master, and the slaves play along in time! I guess you might be able to setup some
Re: [Evolver] OF MIDI Clock and insistent sequencers
2002-12-23 by Paul Nagle
... Well, when I do this (which is often) I simply set the triggering to be MIDI only for the envelopes. Then the sequencer runs but doesn t have to be
OF MIDI Clock and insistent sequencers
2002-12-23 by drK
I notice a problem using Evolver, more of an annoyance than something serious. I d be interested if anyone has any feelings about this or another work around.
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by Crackpot
hey, you could always work on beats/accompanying music for your songs then when it comes back from repair just drop it in and go...! -N -- DSP Audio Effects!
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by jpyn8 <jp1@comcast.net>
Story about the button caps - my first Evolver had an accident that I first thought was intentional. Those little black button caps basically snap on to
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by thligrdd <onthesurface@cox.net>
Hehe, it was sarcasm, Ravi. Lighten up! It was good advice, I just want to have my cake and eat it too. ... quickest is Fedex overnight :) ... I ...
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by Ravi Ivan Sharma
I read the message. That s the best I could come up with. The quickest is Fedex overnight :) ... From: thligrdd To:
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by mr klown
Well email dave and tell him your gonna switch the button yourself. I d be really surprised if he doesn t back you up on it and would probably still hold the
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by thligrdd <onthesurface@cox.net>
Sorry Ravi, maybe you didn t read into the message that well, but I was looking for a quick, convenient fix, no matter how unrealistic that may be! ;)
Re: [Evolver] Evo-button just ain't right...
2002-12-23 by Ravi Ivan Sharma
Sorry to hear that. I think the smartest (but still unfortunate) thing to do is send it back to Dave. Ravi ... From: thligrdd To:
Evo-button just ain't right...
2002-12-23 by thligrdd <onthesurface@cox.net>
Hey guys, after getting a board swap on my original evolver in exchange for a rev 1.2, I m having problems with the start/stop button - it doesn t trigger
Re: [Evolver] Evolver Christmas gift...
2002-12-22 by Ravi Ivan Sharma
This is great! I hope you will keep us informed about your experiences with the evolver as an effects unit. Most of us, I am guessing, use the evolver as a
Evolver Christmas gift...
2002-12-22 by mesadude1 <craigw@sonic.net>
Hi everyone. I m a guitar player. Been playing since 1963. I just read about the Evolver last week. Checked out the sound files and specs, and ordered myself
Merry Christmas
2002-12-20 by Ski <ex5tech@excite.com>
Just a quick note to wish you all a Merry Christmas and happy holidays. Pretty tough to beat a new Evolver under the tree! :) Take care. Ski www.ex5tech.com
RE: [Evolver] Sound differences in JP's patches comparison
2002-12-20 by Don Gothard (dg)
I just got a replacement board today as well (yee-hah!) as I also suffered from the static noise thing from an early batch. My A/B comparison shows that the
Sound differences in JP's patches comparison
2002-12-20 by Ski <ex5tech@excite.com>
I checked them out, and I could easily tell the difference between the old and new board on Patch 1. Of course, with a good part of Evolver being analog, you
Re: [Evolver] Re: for a good time...
2002-12-20 by Ravi Ivan Sharma
It s not going to be that extensive. I just haven t had time to see if the same exact patch sounds exactly the same in both evolvers (sans any potential noise
Re: for a good time...
2002-12-20 by Ski <ex5tech@excite.com>
Thanks for the info, JP. Ski www.ex5tech.com ... tests
Re: for a good time...
2002-12-19 by jpyn8 <jp1@comcast.net>
... Yes, it had that static noise problem in OSC 2 that showed up in a handful of the first batch of boards. The replacement is a 100% improvement. -JP
[Evolver] Re: for a good time...
2002-12-19 by Ski <ex5tech@excite.com>
Ravi - Cripes, I remembered that you d bought a second unit right after I made that last post! Prior to spending the time to do extensive sound comparisons
[Evolver] Re: for a good time...
2002-12-19 by jpyn8 <jp1@comcast.net>
... That was me - I m juno60 over at the Gas Station...I ve got so many different nicknames at so many sites, I really should fix that. Here s the link if
Re: for a good time...
2002-12-19 by Ski <ex5tech@excite.com>
Jason, did you have problems with #00022? If not, why did you have the board replaced? Ski www.ex5tech.com ... just ... (s/n ... Dave,
Re: [Evolver] Re: for a good time...
2002-12-19 by Ravi Sharma
oops sorry! I forgot to mention I bought a second Evolver #177, so has the slightly modified board I guess. I didn t check my first unit, but I am positive it
Re: for a good time...
2002-12-19 by jpyn8 <jp1@comcast.net>
1.1 and 1.1 here too. Serial # 00022, but I had the 1.0 board replaced with a Rev 1.2 just this week. -jason ... s/n.
Re: for a good time...
2002-12-19 by Ski <ex5tech@excite.com>
Ravi, you wouldn t be pulling our leg now, would you? ;) Mine shows 1 0 and 1 0 . And though I have a rather early unit (s/n 00009) I have to believe
Re: [Evolver] Re: for a good time...
2002-12-19 by Ravi Ivan Sharma
Mine says 1 1, and 1 1. Is this what everyone is seeing? ... From: synthmanic To: DSI_Evolver@yahoogroups.com Sent: Thursday, December
Re: for a good time...
2002-12-19 by synthmanic <synthmanic@yahoo.com>
Well, this was going to be discovered sooner or later: Press the 1 and 2 row buttons at the same time. Press the 1 and 3 row buttons at the same time. They are
Re: [Evolver] for a good time...
2002-12-19 by dokdex
Welcome to LED check mode.... -dokdex (who s had #26 for a bit now heh heh.... At 12:09 AM 12/19/02 -0500, you wrote: That s really cool. Like a evolver screen
Re: [Evolver] for a good time...
2002-12-19 by Ravi Ivan Sharma
That s really cool. Like a evolver screen saver with no screen. I want to leave mine like that all the time when I am not playing it! ... From: phuqueewe2000
for a good time...
2002-12-19 by phuqueewe2000 <shifty@gweep.net>
Hold down shift while powering it on... weird alien nightlights.... No other button seems to do anything while powering it on... Nothing seems to change the
DSI Evolver Demo Loops (in .wav and .mp3 formats)
2002-12-18 by Ski <ex5tech@excite.com>
Sorry to be so quiet lately... work s been a bear. I recently finished a collection of 76 sampled loops from the Evolver that I posted at ampfea/Samplelibrary.
Finally #215
2002-12-17 by Riccardo Coen <zinoff@yahoo.com>
After a long phone fight with UPS I managed to get mine. They were a day late and I was about to have a crisis. It haven t been programming a synth with a
Re: #171
2002-12-17 by Collin <collin_meyer@yahoo.com>
Oh, I see, I get ya. Makes much more sense now... ... source, ... ... do ... were
Re: #171
2002-12-17 by thligrdd <onthesurface@cox.net>
Hehe, I think you misunderstood me. I mean, does the filter step (quantize, stepping noise) when being modulated from a manual source, like foot controller or
Re: Evolver Question/Future Suggestions
2002-12-17 by phuqueewe2000 <shifty@gweep.net>
Sequence 1 is special- it contains a setting called Off, near rst (reset). Off means that step will not trigger the envelopes, and will hold the last
Re: #171
2002-12-17 by Collin <collin_meyer@yahoo.com>
The evolver has routable destinations for: Foot Controller Breath Controller Pressure Mod Wheel Velocity Env fol (think this has to do with the audio in) In
Re: [Evolver] just received mine...
2002-12-17 by simon leclerc
Cut the cord Ken and give us your review ;) on 16/12/02 6:35 PM, Ken Luke at ken_luke@mentor.com wrote: Finally had a chance to play around with my evolver,
just received mine...
2002-12-16 by Ken Luke
Finally had a chance to play around with my evolver, woo hoo! I received it a couple of weeks ago, but was busy with finals. One thing I d like to compliment
Re: Evolver Question/Future Suggestions
2002-12-16 by jpyn8 <jp1@comcast.net>
... and/or ... It can be simulated though - I know there are some presets in Bank A that have sustained notes across sequencer steps. I think if you set a step
Re: Evolver Question/Future Suggestions
2002-12-15 by thligrdd <onthesurface@cox.net>
... might be able to help/offer some advice. ... tieing two steps together (ie. simluting a held down key) ? ... Simon - Currently, there is no such
Evolver Question/Future Suggestions
2002-12-15 by kpr77
Hi Evolver list, I was wondering whether someone with a bit of Evolver experience might be able to help/offer some advice. Is there any way of varying the gate
Re: [Evolver] Re: #171
2002-12-15 by JOSHUA HOLLEY
... originally thought, though it is a little tough when doing subtle sweep, having the clicking motion. i prefer the way it us for everything else. my
Re: [Evolver] Tell me why i should get it...
2002-12-14 by thligrdd <onthesurface@cox.net>
... that ... That s a great idea! I m glad I thought of it ;). Hmm, it sounds like a project to me...custom evolver case.
Re: #171
2002-12-14 by thligrdd <onthesurface@cox.net>
... Actually, dave has implemented a smoothing algorithm for the filter cutoff and some other functions, the filter shouldn t really step, it just feels like
Re: [Evolver] Tell me why i should get it...
2002-12-14 by jpyn8 <jp1@comcast.net>
... Yee-Haw!