Yahoo Groups archive
Messages
Page 532 of 564 · 28179 messages matched
2002-04-29 by grove@zeta.org.au
Hi there, I am planning my next stage in world domination - I'm organising a G6 rack to complement my mini system. Looking around, it seems a lot of systems contain the "multiple" module in at least pairs or more. What do these do for me? I'm a little unclear. Also, given that I
2002-04-28 by jason kahn
hello hello i have a an a100 system and am trying to work with it in the range of only 14000-14200 hz (for a special composition). i am using modules like the a-111 vco2, the a-110 vco and the a-145 lfo, plus different filter modules, etc. my question is: does anyone know how i c
2002-04-28 by arpguy
Hello Everyone, I have several rare analogue synth's and accesoires for sale, Please a look at this website for more info and Picture's at : http://www.geocities.com/arpguy thanx for reading, arpguy
2002-04-28 by Andreas Lindholm
If you wanna trade a 190 for a 110 just tell me so. I wanna go that way =) ----- Original Message ----- From: "buechlerjoe" To: Sent: Sunday, April 28, 2002 3:56 PM Subject: [Doepfer_a100] Re: Experience using MCV4 with A100? > Thanks for the information, keld. Instead of using t
2002-04-28 by buechlerjoe
Thanks for the information, keld. Instead of using the mod wheel, is it possible to set the MCV4's bend range to zero, and pick up the pitch bender CV from one of the assignable jacks instead? It's kind of a bummer anyway, because my slew limiter tends to get used up already, smo
2002-04-28 by studio1dk
I´m using the MCV4 with my A-100. It works Ok but if you use the pitch-bend you´ll hear small "steps" and not a gliding tone (quanticed). I use the mod-wheel patched through the slew limiter and get the bending there. keld --- In Doepfer_a100@y..., "buechlerjoe" wrote: > I'd like
2002-04-28 by duffnuff
"electricbeats_eof" wrote: > I'd be interested in a module like that too... > After reading your reply, bakis, I ask myself if you could tra a > workaround via MIDI program like MAX(the 'quasi' MIDI 'VERSION' of > MSP... > The question is what the module should do, if it > A) jus
2002-04-27 by electricbeats_eof
I'd be interested in a module like that too... After reading your reply, bakis, I ask myself if you could tra a workaround via MIDI program like MAX(the 'quasi' MIDI 'VERSION' of MSP... The question is what the module should do, if it A) just has to transfom a MIDI note's pitch i
2002-04-27 by Roel Steverink
Hi guys and girls, As annonced earlier on this list, the dutch mag. Interface would test the A 100. It came out a couple of weeks ago. I didn't have the time to give you the results. So here they finally are. I must admid I was really dissapointed to see how superficial it all wa
2002-04-27 by Andreas Lindholm
I have tried to stay clear of the a190 for long and now I realize I have been wrong=) ----- Original Message ----- From: "buechlerjoe" To: Sent: Saturday, April 27, 2002 4:40 PM Subject: [Doepfer_a100] Experience using MCV4 with A100? > I'd like to have an extra Midi channel for
2002-04-27 by buechlerjoe
I'd like to have an extra Midi channel for occasional duophonic operation of my A100. I can drive the A100 from two different Regelwerk tracks using the CV outputs, but I'd like to be able to run it that way from a Midi sequencer also. I don't need all of the channels and outputs
2002-04-26 by bakis Sirros
hi tim, i am not sure,but i think that the pitch-cv/gate/midi converter sends also a midi note info on the midi output.instead ,the a192 only converts vc's to continious controllers but not gates to midi notes...if i'm right,of course...i don't have the a192 module. by the way,it
2002-04-26 by Florian Anwander
Hi Paul >It sounds okay, but different than the A-114. The only problem is that if only one >signal is patched into the ringmodulator, it is still audible on the output. But I >think it might be my fault, as I didn´t really manage to calibrate the PCB (that one is >my first power
2002-04-26 by stinchcombe_t
I would quite like to get hold of pitch-to-CV module of some description, but I wouldn't want the MIDI interface with it. Why put the two together, which presumably increases the price, when the A-192 already exists (or is there a proposed difference in functionality)? Tim [The v
2002-04-26 by sambouch2002
Sorry to bother you guys, but I have a question about using a ring modulator with a guitar. I was wondering if I play a guitar chord into a ring modulator, will the ring modulator will process it correctly? I was thinking that a ring modulator would be a part of my ideal guitar s
2002-04-25 by Andreas Lindholm
First of all, thanx to all who helped out with the 5v converter. Then I must confess that the a190 worked like a charm. Seldom does auto select thingys work, but this did. I pressed two buttons and it found the midichannel and everything worked.
2002-04-25 by Andreas Lindholm
okey, then I will just plug it in and add the 190 to my system bus ;) ----- Original Message ----- From: "Rhen, Kris" To: Sent: Thursday, April 25, 2002 7:01 PM Subject: RE: [Doepfer_a100] Am I very dense here? > That is correct. Normally, modules that don't use +5v don't even co
2002-04-25 by Rhen, Kris
That is correct. Normally, modules that don't use +5v don't even connect anything to those pins on their cable. Its just totally unused. They all use the +-12v stuff though, and GND of course. Later KRIS > -----Original Message----- > Great Kris, thanx for the help, so if I under
2002-04-25 by Andreas Lindholm
Great Kris, thanx for the help, so if I understand you right... using the converter I can plug in both 12v modules and 5v modules on the same busboard, right? ----- Original Message ----- From: "Rhen, Kris" To: Sent: Thursday, April 25, 2002 2:14 PM Subject: RE: [Doepfer_a100] Am
2002-04-25 by Andreas Lindholm
Sorry, but I will vote against since I find other upgrades more important. ----- Original Message ----- From: "bakis Sirros" To: "Doepfer_a100 group" Sent: Thursday, April 25, 2002 4:29 PM Subject: [Doepfer_a100] the pitch to cv/gate/midi converter... > hi list, > i just received
2002-04-25 by bakis Sirros
hi list, i just received the following info from dieter doepfer: "We started the development of the Pitch-to-CV/MIDI converter about 1 1/2 years ago. But we stopped the development as the inquiries for the converter seem to be very poor. The time required to finish the developmen
2002-04-25 by Rhen, Kris
The bus board looks like this pin 1: -12V pin 2: GND pin 3: GND pin 4: GND pin 5: +12v pin 6: +5v pin 7: Bus CV pin 8: Bus Gate Normally, the power supply ONLY supplies the first and fifth pins (as well as the three ground pin sets) and nothing is put on pin 6, so normally there
2002-04-25 by synth_freak_2000
hi list, i have put some new a100 loops in the doepfer main page for anyone to hear...the link: http://www.doepfer.com/a100e.htm bakis synthfreak athens-greece [doepfer_a100] group moderator
2002-04-25 by buechlerjoe
Check the LEDs on the right hand side of the bus board. When the 5V adapter is plugged in, the +5V LED should be illuminated when the power is on. This tells you that +5V is available on the entire rail. It doesn't matter which connector the A190 is plugged in to. Joe --- In Doep
2002-04-25 by Andreas Lindholm
Sorry, but it still unclear to me. If I put the converter two jacks from the edge of the bus board will only those be 5v outputs or will in fact the whole bus boars turn into 5v? The latter is what it seems like to me. Needless to say that is not what I want since I only want to
2002-04-25 by Paul Schulz
Hey list, don´t know if anyone realized, but the prices for all filter modules based on the CEM 3320 filter chip (A-121, A-122, A-123) are getting increased on May 1st . New prices are as follow (All prices in Euro, old price in brackets): A-121: 95 EUR (85 EUR) A-122: 80 EUR (70
2002-04-25 by Paul Schulz
Well. I didn´t find it in the pricelist. The only item I found is that one: "Steckernetzteil prim. 230V (Eurostecker) sec 9V/800mA DC (Kleinspannungsstecker) AC Adapter (Power Supply) prim. 230V (European mains plug) sec. 9V/800mA DC (DC plug)" This one costs 20 EUR, and it is no
2002-04-24 by Rhen, Kris
Andreas, its ok. The 5v line is already on the bus; its just unused until you connect the 5v adapter, which merely puts a voltage regulator across from the +12v converting it to +5v, and sticking it on the bus. You should be all-set! KRIS -----Original Message----- From: Andreas
2002-04-24 by Andreas Lindholm
Or is there still one part missing in the manual about the 5v converter. Fitting it it now obvious, but as to where to connect the 190 to the busboard is still unclear to me. On which side of the converter? Can somebody plainly explain that part? ----- Original Message ----- From
2002-04-24 by Andreas Lindholm
Okey, hope I can get one... is the power inletpart listed in the doepfer pricelist? but it will take some more days to get it so no music this weekend. ----- Original Message ----- From: "Paul Schulz" To: Sent: Wednesday, April 24, 2002 8:15 PM Subject: Re: [Doepfer_a100] Feeling
2002-04-24 by Andreas Lindholm
Thanx Bakis, I knew it had to be somewhere! ----- Original Message ----- From: "synth_freak_2000" To: Sent: Wednesday, April 24, 2002 8:17 PM Subject: [Doepfer_a100] Re: How to use the 5v converter > hi andreas, > you can find all the info you need about the low-cost 5volts adapt
2002-04-24 by Paul Schulz
Hi Andreas, a friend of mine is building a 6U case (made of plexiglass!!! I´ll add a photo to Yahoo when it´s ready.) and he has the same problem. As you mentioned you need the busboard, the power supply, the plate and additionally the power inlet. Although it isn´t mentioned any
2002-04-24 by phaedra@t-online.de
You have it to place on the bus like the cable between a module and the bus, possibly near the A-190 cable- connection! Gruss Axel Am 24.04.02 19:27:55, schrieb "Andreas Lindholm" : >This is my unlucky day... I bought an a190 and a 12-5v converter and I can't >find any info about
2002-04-24 by Andreas Lindholm
This is my unlucky day... I bought an a190 and a 12-5v converter and I can't find any info about how to connect it to the bus board. Can anybody explain... I see no info on the doepfer website more than "a 5v is required...".
2002-04-24 by Andreas Lindholm
Damn, now I feel let down by Doepfer again. I assumed too much as usual. The term backplate for bus board is indeed just a backboard. I was kinda expecting a hole and perhaps even a power outlet jack since the homepage calls it the plate for powersupply and not just plain plate -
2002-04-24 by synth_freak_2000
hi andreas, you can find all the info you need about the low-cost 5volts adaptor in page 29,30 of the a100 introduction section of the a100 user's manual(or in page 35/36 of the PDF file in the doepfer's site manuals section. bakis. In Doepfer_a100@y..., "Andreas Lindholm" wrote:
2002-04-24 by buechlerjoe
Just plug it in to one of the bus connectors, as if it were a module. The red edge corresponds to the red stripe on the module ribbon connectors. Joe --- In Doepfer_a100@y..., "Andreas Lindholm" wrote: > This is my unlucky day... I bought an a190 and a 12-5v converter and I can't
2002-04-24 by Evan Lorden
g'day. well, that's why I bought my system over in Europe. I paid $3000 Australian Dollars for the 6U rack full of modules. I worked it out to costing somewhere between $5000 and $6000 if I'd purchased it from the importer here in Melbourne, and that's not saying anything of the
2002-04-23 by davevosh@aol.com
In a message dated 4/22/2002 8:16:57 PM Eastern Daylight Time, grove@zeta.org.au writes: > How are the prices in Europe compared to Australia? I note that prices > over here are very high - $900 for the 6U rack with just the buss and > power supply for example. The modules aren't
2002-04-23 by arpguy
Analog Synthesizer Books/Brochure's/advertisements/pricelists and also old music-magazine's with info and/or reviews of synthesizer's built between 1960 and 1990. (I'm also interested in copy's) Especially Looking for = ARPEGGIO's (newsletter's from ARP) , I can trade some also.
2002-04-23 by bakis Sirros
hi rachel, what??900$ for the 6u rack??the a100 g6 rack costs only 300 euros in europe...so,you're paying more than triple the original price...that's bad... bakis. --- grove@zeta.org.au wrote: > > G'day Rachel, > > Love ya story !: > > I was travelling in Europe, saw the system
2002-04-23 by grove@zeta.org.au
> G'day Rachel, > Love ya story !: > I was travelling in Europe, saw the system in a shop in Utrecht and couldn't > stop thinking about it till I bought a system to bring home to Oz with me! > Went right to Doepfer's nice little "factory" in Munich, just to know where > it comes
2002-04-22 by Evan Lorden
G'day Rachel, Love ya story !: I was travelling in Europe, saw the system in a shop in Utrecht and couldn't stop thinking about it till I bought a system to bring home to Oz with me! Went right to Doepfer's nice little "factory" in Munich, just to know where it comes from. Ev On
2002-04-21 by krhenlists
Hi all, I just started another poll regarding the silk-screening of Doepfer panels. Please take a moment and give us your experiences. Also, in the poll titled "I don't know if this has been polled before, but I'd like some real stats on this..." regarding BAD JACKS, we've only g
2002-04-21 by Doepfer_a100@yahoogroups.com
Enter your vote today! A new poll has been created for the Doepfer_a100 group: Another quality question: I've seen reports that the silk-screening on the Doepfer panels wears off rather quickly. What's your experience? o Mine are perfectly in tact o A little wear in some high-tra
2002-04-20 by bakis Sirros
hello rachel, welcome to the group!, about the a190...all you have to do is read the pdf manual in the doepfer site.no editor/software for this that i know about... as for the manual you can buy it from doepfer.if the shop doesn't have it or it can't order it from doepfer,then, i
2002-04-19 by Paul Schulz
I bought a Lindhof ringmodulator DIY-kit on ebay about two months ago. Easy to do and compatible with Doepfer, as it runs with 12V although it is based on the Formant Pro, which usually runs with 15V. It sounds okay, but different than the A-114. The only problem is that if only
2002-04-19 by Andreas Lindholm
I have rarely seen any below 1200 pounds... but it varies with number of modules. but 1200 is for something similar to a Doepfer Basicsystem. ----- Original Message ----- From: "Florian Anwander" To: Sent: Friday, April 19, 2002 1:55 PM Subject: Re: [Doepfer_a100] Roland System 1
2002-04-19 by Florian Anwander
Did anyone work with the Modules from Lindhof http://www.msc175.de/ (only in german, sorry) Any experience? Florian -- Florian Anwander |ConSol* HP-Support Tel. +49.89.45841-133 |Consulting&Solutions Software GmbH Fax +49.89.45841-139 |Franziskanerstr. 38, D-81669 München email:
2002-04-19 by Florian Anwander
Hi Manuel > does anyone know what a "Roland - System 100" in good condition is > worth today (street value)? Hmm, uuuh, I think it costs reaaaaal a lot of money... uuuhmmm, if I really think about it, it is not affordable.... btw: what is the address of your friend? ;-) Honestly.