Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
Thanks, I ll ask them and see! Any known good alternatives for Mac? Sent from James iPhone
Messages
Browse messages
Page 12 of 112 · 5574 messages matched
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by Cdtobie
... It appears to be a true RIP, so it will bypass the RGB print path, and avoid the issue at hand. Whether it applies profiles well, turns CM off for target
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
I might try PrintFab, as it looks like it might allow this kind of thing on a Mac and looks pretty full featured. Any thoughts on whether it ll do this kind of
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
What a fine mess :(
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
Thanks for the detailed info. That is sad indeed... I m reluctant to install Windows on my Macs, or go back to PC use and I don t have any older machines to
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by Cdtobie
... All the printer companies have instituted the new print path in newer drivers, but they have done it in varying ways, that may look different in different
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by Cdtobie
... Apple changed their printing path some time ago. The new path has no way to bypass ColorSync, so all prints, including color targets and pre corrected
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
Do Epson drivers still have the ability to disable colour management under Mac OS 10.6 or 10.7 then? Sent from James iPhone
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-05 by james_whitehouse1@yahoo.co.uk
How bizarre - could you explain what Canon said? What s Apple s reasoning, it sounds like you ve probably spoken to them about it? I m more familiar with
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by Cdtobie
... I ve had some frank discussions on the topic with Canon; this is not their fault, they are just doing what Apple tells them they need to do. The changes we
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by james_whitehouse1@yahoo.co.uk
Hi David, Hm, even more odd that it was once considered a worthwhile driver feature but is no longer there- seems like a regression of functionality. I suppose
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by David Miller
... No idea why; only that this has been an issue with Canon drivers for OSX ever since Leopard came out. The last time that there was a working None control
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by james_whitehouse1@yahoo.co.uk
Hi David, Much appreciated, the tech support at Canon was woefully inadequate on this - the option is there in the Windows driver, so why no parity on the Mac?
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by David Miller
... James, This is how you should print the target: - The Canon drivers stopped having a None setting for color management several versions ago. The only way
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by james_whitehouse1@yahoo.co.uk
Hi guys, Thanks for the suggestions, unfortunately neither is the case in the Mac driver, although I saw the option for no Color correction on my friend s PC
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-04 by Laurie Solomon
I do not have a Mac so what I am suggesting may not be appropriate. I would select the Colorsyn option and see if it offers an option to turn either Colorsync
Re: [datacolor_group] Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-03 by John
... A long shot maybe, but for a Canon iP4500 under Windows it can be found as follows (may be different for Mac): Open the printer preferences dialog box
Canon MG6150 Print Driver Settings under Mac 10.7
2011-12-02 by James W
Hi, I just purchased a Spyder3 Print SR for use with a couple of printers. I m having trouble with my A4 photo printer, a Canon MG6150, in the printer driver
Re: Spyder3Print 4.2.2 upgrade
2011-11-30 by Magnus (Barelegs) Twatt
Yes, the software installed correctly but the profile produced showed a very corrupt output which was exactly matched when printed. The reinstall of 4.2.1
Re: [datacolor_group] Laptop Gamut: MacBook Pro?
2011-11-28 by Jim Miller
Actually our Dell laptop doesn t display any discernable color shift for normal viewing angles. Perhaps it would if the gamut was larger. No big deal as
Re: [datacolor_group] Laptop Gamut: MacBook Pro?
2011-11-28 by C D Tobie
... I assume that IPS will become standard on all Apple products before too long; once they learn a lesson or embrace a technology, they tend to maximize it...
Re: [datacolor_group] Laptop Gamut: MacBook Pro?
2011-11-28 by Don Ament
When I compared the Apple laptops to the iPad2 in the Apple store, the iPad seemed to have much less of a problem with off-axis viewing. There was some change,
Re: [datacolor_group] Laptop Gamut: MacBook Pro?
2011-11-26 by Cdtobie
... After I profiled it with the Spyder3 I looked at the gamut display and found that it was almost a direct overlay on sRGB. In comparison her Dell desktop
Laptop Gamut: MacBook Pro?
2011-11-26 by mdgolfbum
When my daughter wanted to do some work with her photos on her laptop I told her I d profile the display to try to make it somewhat accurate. Her laptop is a
Re: [datacolor_group] Spyder3Print 4.2.2 upgrade
2011-11-18 by Cdtobie
This is the type of technical problem that the support system at the Datacolor website s designed for. C. David Tobie Global Product Technology Manager Imaging
Re: Spyder3Print 4.2.2 upgrade
2011-11-17 by elo
Corrupt how??? program or something wrong with the profile produced..??? elo
Spyder3Print 4.2.2 upgrade
2011-11-16 by orkney.boy@btinternet.com
Upgrade Spyder3Print to v 4.2.2. Installation normal. However, seriously corrupt profile produced. Repeated - same. Uninstalled 4.2.2 and reinstalled 4.2.1
Re: [datacolor_group] Adjust White Luminace with Monitor's Brightness or Contrast control?????
2011-10-20 by Cdtobie
... On old fashioned displays (CRTs and some of the earliest LCDs) the black clipping was adjusted with the brightness control, and the white clipping was
Adjust White Luminace with Monitor's Brightness or Contrast control?????
2011-10-20 by tech4x5
I have Dell Ultrasharp monitor. When calibrating with spyder 3, I want to change the white luminance. My monitor has controls for both Contrast and
Re: What's wrong?
2011-10-19 by Keith
OK. I will now wipe the egg off my face. I re-read the original responses line by line. The one thing that I did differently was that I went into the Epson
Re: What's wrong?
2011-10-16 by Keith
I would also add that in addition to upgrading my computer & PS, I also am running Win7-64 and PS 64. The profiles I have made end up in
Re: What's wrong?
2011-10-15 by Keith
The reply below is to an exchage I had last year with a new ink set. In the interm, I have upgraded the computer and PS software and made prints with the same
Re: [datacolor_group] Magenta color cast in printer profile
2011-10-11 by Chris Conrad
Hi David, I did print the pages through Spyder3Print. I m pretty sure that I had the driver settings correct, though I can t be 100% sure that I got it correct
Re: [datacolor_group] Magenta color cast in printer profile
2011-10-11 by David Miller
... Hi Chris: The most likely mistake you re making is printing the targets incorrectly. If you print them wrong (color managed), you get a calibrated target
Re: [datacolor_group] Magenta color cast in printer profile
2011-10-11 by C D Tobie
David Miller will provide you with directions on how to print your targets without accidentally color converting them. This should solve your problem. C. David
Magenta color cast in printer profile
2011-10-11 by rhavyn113
Hello, I recently acquired Spyder3Studio SR and am trying to create a printer profile for Canson Infinity Baryta Photographique for my Epson 3800 printer. The
Re: [datacolor_group] Re: Base for Spyder 3 Reader - how does this thing go together?
2011-10-05 by C D Tobie
... If so, we will certainly replace it. When I look inside one, I see large holes in the back (attached to the base) and small pins (with holes inside them,
Re: Base for Spyder 3 Reader - how does this thing go together?
2011-10-05 by grandpollo
That s the oint. It doesn t pop back at all. The free piece has two small holes at the bottom. The fixed piece has two larger holes. Holes don t pop into
Re: [datacolor_group] Re: Base for Spyder 3 Reader - how does this thing go together?
2011-10-04 by C D Tobie
... Given that the vast majority of the items have had no problem, and its easy to just pop it back on yourself, its hard to justify a recall. Adding a bit of
Re: Base for Spyder 3 Reader - how does this thing go together?
2011-10-04 by grandpollo
This makes me long for the days of customer service of old, when a vendor would say, the factory made a bunch wrong, risking damage to your $200 piece of
Re: [datacolor_group] Base for Spyder 3 Reader - how does this thing go together?
2011-10-03 by C D Tobie
... No, there was a gap in time where the factory failed to glue the front sections onto the base, and there were shipped with only friction fit. Gluing yours
Base for Spyder 3 Reader - how does this thing go together?
2011-10-03 by grandpollo
I have the 3 sensor set up to monitor ambient light. It fell off where it sat last night, maybe 6 inches and the two parts of the base that create a slot for
Re: [datacolor_group] Calibrate the Computer of the Slide Projector
2011-10-03 by Cdtobie
The recommended method is pointing the calibrator at the screen, which factors the screen into the calibration. But you ll get most of the value of the process
Re: [datacolor_group] Calibrate the Computer of the Slide Projector
2011-10-03 by Tom
... Your intuition is correct. Your colleagues are wrong. Tom
Calibrate the Computer of the Slide Projector
2011-10-03 by Roy Sletcher
Can somebody definitively answer the following question. I am getting different answers from different people. When projecting images through a projector onto
Re: [datacolor_group] Thank you
2011-09-14 by Cdtobie
... Rollin H., who was getting dark/greenish cast prints, because his new profile was built from an incorrectly printed target) I left that one for Dave M to
Re: Thank you
2011-09-13 by Rollin H
I ve said it before and am glad to say it again: the support provided by everyone associated with Datacolor on this user support group has been great. It is
Re: [datacolor_group] Thank you
2011-09-13 by David Miller
... Thanks...:-) (This time, I think Dave R. was referring to my reply this morning to Rollin H., who was getting dark/greenish cast prints, because his new
RE: [datacolor_group] Thank you
2011-09-13 by David Randolph
Yeah, us Dave s need to stick together. Keep up the great work...both of you. Dave R. To: datacolor_group@yahoogroups.com From: CDTobie@aol.com Date: Tue, 13
Re: [datacolor_group] Thank you
2011-09-13 by Cdtobie
... I m not sure which David you are referring to, or if you even realize there are two of us, but you are welcome. C. David Tobie Global Product Technology