Re: [CZsynth] CZ1 aftertouch confusion
2011-06-08 by james meagher
Thanks for that idea Bill. Yeah, regarding the polyphony issue, I ve been doing more testing today, and one of those tests was to play in Tone Mix Mode . . .
Messages
Browse messages
Page 51 of 145 · 7206 messages matched
Re: [CZsynth] CZ1 aftertouch confusion
2011-06-08 by tomlinson6050@roadrunner.com
Saw you post about polyphony. Be sure the TONE MIX button is OFF. If it is ON, you can select two single tnes that will be layered - giving four-note
Re: [CZsynth] CZ1 has half its polyphony
2011-06-08 by w.james.meagher@gmail.com
That s great advice Simon. I m going to do some more testing today to see if this could be caused by some setting I m unaware of (I am the guy who couldn t
Re: [CZsynth] CZ1 has half its polyphony
2011-06-08 by Simon Beck
That sounds wrong to me - in Normal mode the CZ-1 should be at least 8-note poly, 16-note in single-oscillator mode. Are you sure you don t have some kind of
Re: CZ1 has half its polyphony
2011-06-08 by narfman96
James, You should be able to play 8 notes in normal mode with a 2 line patch. Tone mix mode will only play 4 notes if they are layered and 2 line patches.
CZ1 has half its polyphony
2011-06-08 by wjamesmeagher
I ve been playing around with the CZ1 I bought recently and have noticed that in Normal mode it s dropping the lowest note played once I engage a fifth note
Re: [CZsynth] CZ1 aftertouch confusion
2011-06-07 by james meagher
Yes. Thanks Bill & Wilson, I ve got it going now and it s working perfectly. I assumed that the Modulation button on the CZ1 was only for settings related to
Re: [CZsynth] CZ1 aftertouch confusion
2011-06-07 by Wilson Zorn
Hmmm, maybe check the After Touch Range? See page 18 at least as numbered in the manual at http://www.synthzone.com/midi/casio/cz1/CZ1%20USER%20MANUAL.pdf
Re: [CZsynth] CZ1 aftertouch confusion
2011-06-07 by tomlinson6050@roadrunner.com
... ============= Hi all, I ve had my CZ1 (my first real synth) for a few weeks now and have managed (with the user manual and reading a lot of previous
CZ1 aftertouch confusion
2011-06-07 by wjamesmeagher
Hi all, I ve had my CZ1 (my first real synth) for a few weeks now and have managed (with the user manual and reading a lot of previous posts made here) to
Re: [CZsynth] Re: Please, unusual request!!!
2011-06-05 by analogfreak2005
Hi JaM!!!! A thousands THANK YOUS!!!!!!!!! Really man!!! If you need anything at all??? I have been desperate to regain this sounds and you made an effort to
new member
2011-06-05 by johndgore100
Sorry if this shows up twice. Had to change a setting on my groups account. Greetings to the group! I m new to the group but not new to the CZ-1000 (I bought
new member
2011-06-05 by John Gore
Greetings to the group! I m new to the group but not new to the CZ-1000 (I bought mine in 1986). If you re interested to hear what I ve done with mine go to
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-06-05 by charlie midi gfa
i can say with certainty , if people keep reposting about the same issue its not clearily my fault they don t understand the sysex. i find this chatter to be
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-06-05 by james meagher
You know Charles, this is just my opinion (I don t speak for the group in any way), but I don t think you should post messages to the whole group boasting
Re: Midi Software for VZ-1?
2011-06-05 by ashleywhiteman
The PG sounds are most probably supposed to be combinations or part of a setup for the 6 strings. Are these in the download area? Cheers
Re: Please, unusual request!!!
2011-06-05 by ashleywhiteman
Hi Is the VZ1 file still available? I use the VZ Editor on the Atari which creates the VZ1 files. thanks Ashley
Re: Please, unusual request!!!
2011-06-05 by José Ãngel Morente Valero
... http://launch.groups.yahoo.com/group/CZsynth/files/VZ%20-%20Sounds/analogfreak%20Bank1.syx Cheers, JaM
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Karl H. May
Thanks everyone for your comments. No new information has yet come to light. If anyone is currently successfully using a pc to load and save cz101 patches
Please, unusual request!!!
2011-05-31 by analogfreak2005@yahoo.com
Hi all!!! First of all I would like to thank Jammy once again for that midi-ox settings for VZ-1!!! Now I ve got unusual request?? If anyone have that program
New file uploaded to CZsynth
2011-05-31 by CZsynth@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the CZsynth group. File : /analogfreak
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by charlie midi gfa
ok , i ll make you a deal,,,,,since i do alot of this coding and figurering out these communications i will demand a trade... alot of my interest are in midi
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
I believe that manual is also on my site:How about this one - I just downloaded the FZF files from the files section. I had minor success using one program to
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Lee Borrell
To my knowledge it dumps one at a time - if there is a string to dump the whole contents I d love it too as obviously one by one takes time to dump the entire
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
That may help me with FZ1 dumps - what puzzled me was how to achieve AUTOMATION - that is- using my technique for MIDI-ox one would need to continuously
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
I still have them and when I need to still dump - it is just that I haven t needed to for ages. Once I get the protocol written down I tend not to do it as it
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
This one is probably the most help: http://templarseries.atspace.com/CZMANUAL.html ... From: steve_the_composer Subject: [CZsynth] Re:
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
The dox I have at : http://templarseries.atspace.com/fz.html may help - there are some PDFs and a link to FZ sysx on the left - but the structure and codes
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Lee Borrell
I have not dumped to/from CZ for a long while...my own written procedure based on what I was told is here:
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Lee Borrell
I managed to dump a D5 sysx - but I have so many to access I have not investigated it too much - it seemed there was no handshaking rubbish with Roland. My D5
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Lee Borrell
60 - Ahhh yes - that s the one! Hex is correct. ... From: narfman96 Subject: [CZsynth] Re: Midiox settings to transmit and receive syx
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Karl H. May
Charles, If you are able to, please give me the sysex strings that work for you as requested. Many thanks, Karl May ________________________________ From:
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by Karl H. May
Hi Charles, Can you give me a full sysex string you use to dump a single sound to your Atari and indicate which patch number ( 1-16 ) the string is requesting?
Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by steve_the_composer
A pdf of the Casio Midi Guidebook (Nov. 1985) is indeed in the files section. If you look at real pp. 39-40 (pdf pp. 40-41). you will see what I mean in my
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-31 by charlie midi gfa
i can maybe help well the vz1 is different than the cz101 thats foir certain i know after you do your homework you ll be as proud as i am after learning
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by Karl H. May
Thanks Steve. Is anyone out there currently using a cz101 and successfully dumping and loading patches using a PC? It would be a big help to me to try and fill
Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by steve_the_composer
FO 44 00 00 70 30 F7 is acknowledge. The CZ is saying, Ï got a sysex message that was intended for me. It implies, If you have more, send it now. I this
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by charlie midi gfa
did you maybe misunderstand me i use a cz101 i use midi ---thru my pc i do not have midi ox the part unknown is i use a real atari but write alot of my
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio CZ line
2011-05-31 by charlie midi gfa
yeah that method is good for solo signals but simply put , we are not fast like machines so a f7/over byte will mark the eox i got one written for my language
RE: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by Karl H. May
Thanks Lee. When I ask the cz101 to dump it s memory it responds with the sysex string FO 44 00 00 70 30 F7. What do I do in response to that? Many thanks,
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by charlie midi gfa
you can just send the whole handshaking string as one command , instead of waiting for the responce (s) from the cz ,, charles ... From: Karl H. May
Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by narfman96
Hi Tjeu, The first 20 is for the CZ101 - CZ5000 synths. The 21 is for the CZ1. The second 20 writes to the internal memory location A1. For the 32 patch synths
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by Lee Borrell
One of those bytes is indeed the patch number - depending on which CZ you have there will be one byte assigned to the edit buffer memory - which holds the
Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by tjeu_horsch
Hello all, This is my first post, so no flames please. Can it be that we are using a wrong patch number? When I Saturday tried to use the files from:
Re: [CZsynth] Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by Lee Borrell
My site appears to be back online: http://templarseries.atspace.com/cz.html The details are in CZinfo and manual and DEFEATING HANDSHAKING links - those
Re: Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-30 by steve_the_composer
Your setup will be based on (1) your internal VZ settings and (2) your midi connections between the VZ and your PC. I believe that once you have those set up
RE: [CZsynth] Midiox settings to transmit and receive syx file to the Casio VZ1
2011-05-29 by Karl H. May
Can someone please upload the midi ox settings to save and load cz101 sounds. Thanks, Karl May ________________________________ From: CZsynth@yahoogroups.com
Re: [CZsynth] Re: and on that note...
2011-05-29 by bill bigrig
Howdy, interesting that you would mention the ESQ-1. This keyboard player, after droppind his Poly-8--, and seeing the keyboard smashed to bits, sold it
Re: [CZsynth] Re: and on that note...
2011-05-28 by Simon Beck
One reason why I didn t go for the Poly-800 all those years ago in the 1980s was that it only had one VCF for all 8 voices. The VCA envolope was fully
Re: buying first real synth, considering a CZ series
2011-05-28 by jaytee.foster
Thanks for the words of advice James. I m not completely adverse to the idea of a vintage piece of equipment that might have a few quirks... I also dabble in