Re: [Digital BW] Eboni-Neutral/Selenium, Piezo-compatible inkset
2003-08-31 by D. Hill
Hi all, Just an update - Finally the Selenium Piezotone Cart has run its course through my printer. Earlier this week I had mixed Paul s set given below and
Messages
Browse messages
Page 1501 of 2186 · 109257 messages matched
Re: EAM turns yellow!
2003-08-31 by Clayton Jones
Hello Mark, ... yellow! The yellowing of EAM has been discussed in this forum for many months. ... I have found that PhotoRag is very close to EAM, requiring
Re: EAM turns yellow!
2003-08-30 by harrisimages
Mark, If you are using EAM, it might be old stock since EAM has been replaced with EEM. Both papers have brightners which make the paper appear whiter. If
Ink blobs on print
2003-08-30 by Johnny Eades
The 1280 cartridge is refilled and set aside for a day or so for the gas to migrate to the top and out, then installed into the printer. There are usually some
EAM turns yellow!
2003-08-30 by Mark Hahn
was headed out the door with a portfolio of quadtone prints (all in plastic sleaves). then I noticed that the edge at the open end of the sleave on all the
Re: tacoma seattle service?
2003-08-30 by Tyler Boley
I wasn t happy with the two official places up here in the Seattle area. I d recommend sending it back to Arditos if you really want it done right. On the
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by Carl Schofield
Mark, Are you using the MIS Ultratone inks or the Epson OEM Ultrachrome inks? Carl
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by markjamesfisher
I am not sure exactly what you mean. I did set up a custom dot gain curve to try to match a printed step wedge with the monitor. I also tried to tweak it
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by markjamesfisher
I m not quite sure what you mean. I am using a custom dot gain curve that I tried to match a printed step wedge to the screen. --- In
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by Carl Schofield
I believe that Daniel Staver has a set of curves (modified 1290 curves by Paul Roark) that he has used with the UT inks in his 2100 printer. See:
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by Chris Hargens
Are you using curves to print with this inkset? Chris Hargens ... DigitalBlackandWhiteThePrint@yahoogroups.com, markjamesfisher ... I ... colormetric, ...
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by markjamesfisher
Sounds encouraging. At least I know it is possible! Unfortunately, I am on a PC so the QTR stuff won t help me much. For reference, my settings are Profile:
Re: digital cameras and qaud printing
2003-08-30 by B. Alex Pettit Jr.
Of Course !! I have an Olympus E-10 4.3 MP digital camera and have made excellent quality BWs up to 12x16. As a reference, I am now scanning 645 format Tmax100
Re: [Digital BW] Re: digital cameras and qaud printing
2003-08-30 by D. Hill
Val, I recently purchased a Canon 10d and print via 1280 - I prefer the quality over scanned negatives, as I only print as large as 8x12. Get a test raw file
Re: [Digital BW] Shadow detail with 2200 and Ultratones
2003-08-30 by Carl Schofield
Mark, What method are you using to print with the UT inks in the 2200? I m using QTR with the UT inks in my 2200 and don t have a problem with blocked
Re: digital cameras and qaud printing
2003-08-30 by Val Brunell
I would like to hear more on this subject. I currently scan both 35mm and MF B&W negs and print with quadtones on a 1280 and I am satisfied with the quality.
Re: quadtonerip 2 not working
2003-08-30 by not_ai
On HP-UX 10.20. Porting quadtonerip from linux to hpux is straightforwad and I do not see that would be a problem (maybe I am wrong:-) The problem is in if
Re: [Digital BW] Digest Number 1726
2003-08-30 by keith smith
http://www.photo-i.co.uk will be doing a review of this over the next few days. FYI the printer takes 3 tri ink carts , CMY, PC PM Bk , and one with 2 greys
Shadow detail with 2200 and Ultratones
2003-08-30 by markjamesfisher
I m trying (desparately) to get decent separation in the 95% range of blacks. I ve tweaked my custom dot gain without much to show for it. The shadows seem
RE: [Digital BW] Print Exchange Idea -- please read (long)
2003-08-30 by Ed Mathews
... Personally, I think this is an interesting idea, and one I was planning to do on a
Re: [Digital BW] Re: Need 1160 - Good Price? Shipping to US
2003-08-30 by Avron L. Gordon
Is the 1160 reaching legend status? I ve been using the Piezo inks for three years. With the 1160, I had clogs and banding. I switched to the 1280 and the
RE: [Digital BW] quadtonerip 2 not working
2003-08-30 by Roger L Sopher
What operating system are you using? Roger ... From: not_ai [mailto:not_ai@yahoo.com] Sent: Friday, August 29, 2003 11:48 PM To:
Re: [Digital BW] HP new 8-ink printerprinter
2003-08-30 by sanfo2003
I understand Now HP has released a quad black ink cartridge for their new HP Photo printer. Don t know if this particular 8 ink printer is the one referred
quadtonerip 2 not working
2003-08-30 by not_ai
I got the error in error_log file: Invalid printer settings! I compiled cups1.19, gimp-print-4.2.5, and the latest quadtonerip beta. The printer is epson 2200,
Clogs with installation of Ultra-tones
2003-08-30 by Bill Strong
I recently installed a Niagara III CIS and MIS Ultra-Tones on my daughter s 1160 which had been running the MIS VM inkset. A nozzle check and two cleanings had
tacoma seattle service?
2003-08-30 by Allen Greenky
I have a 3000 that s been sitting around, I am thinking that the best thing would be to convert to quad inks. I am wondering if there is a service center that
Print Exchange Idea -- please read (long)
2003-08-30 by chipcarterdc
I have never participated in the print exchange run by this group, so I have no idea how it works. If the idea I m about to present is duplicative of what s
re: convert RGB to BW
2003-08-30 by Rick Schiller
I ve tried many of the conversion ideas, of the good ones all are subtley different. The ones converting to LAB are good but no better then other choices.
Re: [Digital BW] SK168 Re-setter and MIS Carts Fit Problem
2003-08-29 by Tom Husband
... another one ... removed the ... push the ... better. ... Thanks Joe. That s what I had to do too although I m not sure what you mean by removing the
Re: [Digital BW] SK168 Re-setter and MIS Carts Fit Problem
2003-08-29 by joe davajon
Tom: I had problems with that unit too. In fact I had MIS send me another one but still had problems. I found that it worked best if I just removed the guide
Re: [Digital BW] Digest Number 1725
2003-08-29 by sandersm@aol.com
... Mind you, I m a bit color-blind -- doubtless one reason why I prefer BW photography! -- and one of the colors seems to be a blue/green blend (teal?) and I
Re: [Digital BW] Free Photoshop Actions for Grayscale Conversion [was plug-ins]
2003-08-29 by Ken Schuster
I m not connected with InkjetGoodies, and shouldn t post their material... but out of curiosity, I tried to discover how to do it. I realize that sometimes I
RE: [Digital BW] New to VM Quadtones, some thoughts and questions.
2003-08-29 by Ed Mathews
Sorry, sent it to the list by mistake. My bad. Ed ... http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a
RE: [Digital BW] New to VM Quadtones, some thoughts and questions.
2003-08-29 by Ed Mathews
Let me know how these work for you. Ed ... http://groups.yahoo.com/group/DigitalBlackandWhiteThePrint If you wish to receive no emails or just a daily digest,
[Digital BW]Curves for VM Quadtones and 1200 on Mac
2003-08-29 by Sue Tallon
Hi all, I m getting great results with Roarks 4 curves and workflow from the MIS site on EEM with my 1200 Epson and MIS QVM inks. Does anyone have other
Re: [Digital BW] Free Photoshop Actions for Grayscale Conversion [was plug-ins]
2003-08-29 by Mark Savoia
I see. ... [Non-text portions of this message have been removed]
Re: [Digital BW] New to VM Quadtones, some thoughts and questions.
2003-08-29 by Matt Betea
... out. Let ... Interesting find Ed, it s too bad you had to go through all that though. But yes, I would appreciate it if you could email me the curves. You
Re: Convert RGB to B&W
2003-08-29 by Mark Hahn
what are the six colors? I only have R, G and B to work with:) Is there perhaps a gamma slider for each channel? That would add something of value over just
Re: digital cameras and qaud printing
2003-08-29 by Mark Hahn
don t know what they were smoking, but there is no reason you can t get good quadtones from *any* digital camera, it s just a matter of how large you can make
Re: [Digital BW] Free Photoshop Actions for Grayscale Conversion [was plug-ins]
2003-08-29 by Clayton Jones
... Because one of the reasons they do it is to attract people to their web site. Posting it here would defeat that purpose. I support this kind of marketing
Re: [Digital BW] Septone System for the 2200: any further thoughts?
2003-08-29 by Clayton Jones
Hello Chip, ... I m in the final stages of a test print evaluation which includes the Septone 2200 system. Of the 17 sample prints tested, none are perfect in
Re: [Digital BW] Free Photoshop Actions and problems
2003-08-29 by John Vitollo
... is ... The files are now compressed. You need to open it with Stuffit Expander - that s if youi are on a Mac.
Re: [Digital BW] Septone System for the 2200: any further thoughts?
2003-08-29 by chipcarterdc
Thansk for your impressions. I m going to be out of town this weekend, but will install it all next week and post a full report here ASAP. But, everyone
Re: [Digital BW] Free Photoshop Actions and problems
2003-08-29 by Peter Serling
eileen, thanks for your response. i downloaded without doing anything to it . tried holding the option key and not holding the option key. the file downloads
Free Photoshop Actions and problems
2003-08-29 by Eileen Chun
The download is not stuffed. You need to download the file without doing anything to it. It should be a .atn file.
Re: [Digital BW] Free Photoshop Actions for Grayscale Conversion [was plug-ins]
2003-08-29 by Mark Savoia
Why not just post this file to the files section of this e-group? ... [Non-text portions of this message have been removed]
Re: [Digital BW] Septone System for the 2200: any further thoughts?
2003-08-29 by Thomas Fors
I m waiting for you to open yours and report! :-) Actually, I was very impressed with the tonality of the sample print, but mine had some slight horizontal
Re: [Digital BW] Free Photoshop Actions for Grayscale Conversion [was plug-ins]
2003-08-29 by Peter Serling
i tried holding down the OPTION key while clicking on Mac Download , but still no luck. what is downloaded is a file with the following enclosed: StuffIt!¡
Septone System for the 2200: any further thoughts?
2003-08-29 by chipcarterdc
So, I got the inks and Photoshop plug-in today. Wondering if anyone has any further thoughts on this system before I open it and blow $300 on this experiment?
Re: [Digital BW] Re: Joining the group
2003-08-29 by David Blattel
Thanks Clayton, David B ... ... [Non-text portions of this message have been removed]