Re: QTR curves & profiles
2006-12-11 by Keith R.
Steve, Don t know if this will help you, but PFP has been updated(this weekend) to 2.0 and has some things for B&W. Also, have you checked Keith Coopers site:
Messages
Browse messages
Page 554 of 2186 · 109257 messages matched
Re: which RIP program
2006-12-11 by Keith R.
I havn t tried QTR yet, but it is something I have been considering for a while. Have you looked into the documentation at:
Re: Help! Simple, effective printing for Book, Postcard projects
2006-12-11 by Greg
Steve, I m still fighting with this paper to try and find something that will work with color, and not having much luck. The ink doesn t seem to rub off after
Re: [Digital BW] Preventing cleaning cycle in 2400
2006-12-11 by bfwoolner
Thanks, Bert. That does save a few. I m interested in saving more when I switch out cart. Barbara ... time.
Re: Help! Simple, effective printing for Book, Postcard projects
2006-12-11 by scifka28
... Greg, Thanks so much for your help. I ll look into the paper. Are there any issues with ink offset on facing pages and if so any solutions? Also, is
[Digital BW] Re: QTR curves & profiles
2006-12-11 by Steven Karafyllakis
I m using either a 7600 with MIS Pro inks and HPR308 or William Turner, or (my main workhorse) an R1800 with MIS K4 inks with LK and LLK in the gloss and red
Re: [Digital BW] Preventing cleaning cycle in 2400
2006-12-11 by Bert Katzung
You can save some cleaning cycles by leaving the printer on all the time. Bert katzung1@comcast.net www.astronomy-images.com
OT UT ink equivalents
2006-12-11 by bfwoolner
Transitioning my printing from 1280 UT2 to 2200 UT7 and would like to use all the ink on hand to best advantage. I understand that the UT2 yellow is the same
Re: [Digital BW] Re: QTR curves & profiles
2006-12-10 by Richard Smallfield
... Thanks a lot for that - I ll look it up. What ink and paper combination are you using? I m using UC plus HPR308, Epson Velvet or Moab Entrada Bright.
Re: [Digital BW] Preventing cleaning cycle in 2400
2006-12-10 by Tom Husband
Yes, I d like to know the secret to that too. It drives me crazy when I have one cart flashing low and one or more carts low but not flashing. I change the
Re: QTR curves & profiles
2006-12-10 by Steven Karafyllakis
Richard; ... scanner and the results were terrible. I can t afford PrintFix Pro - not until I can sell more work. I used non- linearised QTR curves for over a
Preventing cleaning cycle in 2400
2006-12-10 by bfwoolner
I just set up a new 2400 and went through 1/2 of original inkset due to corrupted file and difficult installation. Having gone through this $ wasting
QTR curves & profiles
2006-12-10 by Richard Smallfield
Hi, about a year ago I tried making profiles for QTR for my 2100 with my scanner and the results were terrible. I can t afford PrintFix Pro - not until I can
Re: Any 3800 users
2006-12-10 by scott_now_coming
I don t see why it would matter what size BO print you print, big or small. Unfortunatly, I have to print on gloss surface, so I have PK installed in my 4800.
Re: [Digital BW] UT-3D and profile for 2100
2006-12-10 by CDTobie@aol.com
... PrintFIX PRO 2.0 is a software update for PrintFIX PRO. It has no relation to the older PrintFIX Product, and won t work with it. C. David Tobie Product
OT: Adobe & Apple (was Re: [Digital BW] Re: Epson R220 driver on Mac vs. PC)
2006-12-10 by Sam McCandless
... Actually, Christer, the _relatively_ limited performance of the current MBP vs the next MBP which I had in mind can I think be laid at the doorstep of
which RIP program
2006-12-10 by trrekrider
I have just started printing B&W photos using either the Epson ABW driver on my R2400 or simply converting RGB files to B&W using various techniques, soft
Re: Help! Simple, effective printing for Book, Postcard projects
2006-12-10 by Greg
If you are using a RIP like QTR, then you might be able to use Hammermill BusinessOne Glossy paper (I think that s the proper name??). It doesn t like very
Re: Dmax of Claria inks
2006-12-10 by Greg
... papers and ... Most other dye inks produce a very dark black on matte papers, so I m not really sure why these inks would be different.
Re: Epson R220 driver on Mac vs. PC
2006-12-10 by Christer Rosewell
Sam, this has nothing to do with the performance of the Intel Macs - it is purely an Adobe issue. Adobe has chosen NOT to write a universal binary version of
Re: [Digital BW] Epson R220 driver on Mac vs. PC
2006-12-10 by robert49brake
... wrote: I think, the interface is just ... Harlan if you are not familiar with the Mac R220 driver screens there is another small but
RE: [Digital BW] UT-3D and profile for 2100
2006-12-10 by Paul Roark
Marco, ... See http://home1.gte.net/res09aij/Embedding_Photoshop_Curves_in_ICCs.pdf The tone curve is used to print the 21-step curve and is also dropped into
Re: Dmax of Claria inks
2006-12-10 by Rick Colson
Greg wrote: ... the blacks are not as dark as they should be with dye inks. In fact they are not as good as many pigment inks on matte paper. I wonder if
UT-3D and profile for 2100
2006-12-10 by fogmarco
I start to use UT-3d with my 2100 about 3 months ago. Before I used an 1160 with a set of UT-FSN with piezo plug-in. The results are very nice prints, with a
Re: [Digital BW] Epson R220 driver on Mac vs. PC
2006-12-10 by Sam McCandless
... Good, Harlan; I think you ve got a real treat waiting for you. ... Sounds a lot like my R200, which I m trying to do my first serious printing with in the
Re: [Digital BW] Epson R220 driver on Mac vs. PC
2006-12-10 by hhchapman4104
Hello Sam, Thank you very much for the references to the Mac Epson and MacInTouch. I was not aware of them. I look forward to learning from them. I was able to
Re: Help! Simple, effective printing for Book, Postcard projects
2006-12-10 by scifka28
... I have a simple method I use for 8.5x11 of a folded cover with glued binding. With a larger printer I can run folded signatures with a stapled or hand
Re: Help! Simple, effective printing for Book, Postcard projects
2006-12-10 by Greg
How will the books be bound?
Re: Dmax of Claria inks
2006-12-10 by Greg
OK maybe the wording is the problem, the blacks are not as dark as they should be with dye inks. In fact they are not as good as many pigment inks on matte
UT2 curves for Kayenta
2006-12-10 by Rem Roberti
Anyone know which of Paul s UT2 matte curves might be a good starting point for use with Moab Kayenta? Thanks, Rem
Re: Dmax of Claria inks
2006-12-10 by tzinzunzan2006
I m not sure I understand what you re saying. Are you saying that you re NOT impressed with the dmax on matte yet they (the Claria inks) are much higher than
Dmax of Claria inks
2006-12-10 by Greg
Is anyone using any of the Claria ink printers? I m doing some testing with another person and just made some measurements on a few different papers. I have to
Help! Simple, effective printing for Book, Postcard projects
2006-12-09 by scifka28
I m new to this group and am impressed with the wealth of solid information about high end digital black and white printing. I have printed for 30 years in the
Re: [Digital BW] linerization / icc creation
2006-12-09 by Steve Kale
If you are using a RIP that allows you to linearise its output then you would linearise before profiling. Linearising simply means getting output that shows a
linerization / icc creation
2006-12-09 by esharamaki
Can someone explain to me the difference between linerization vs. printing with an icc? I have printfixpro that I ve been using for color prints and I d like
Re: [Digital BW] Epson R220 driver on Mac vs. PC
2006-12-09 by Sam McCandless
... Congratulations, Harlan. ... I haven t upgraded to an Intel Mac yet, Harlan (because I ve been waiting for a MacBook Pro I think might do as a desktop
Re: Any 3800 users
2006-12-09 by Andre Moreau
... Scott, Do I read that BO works great on the 3800 for prints up to 16 (small side)? Cheers, Andre
Re: [Digital BW] Do ICC's work together with ABW?
2006-12-09 by Steve Kale
No. (1) can bring about changes in the luminance ramp but frankly you don¹t need to if you profile it well enough. A linear device is good essentially
Re: [Digital BW] Do ICC's work together with ABW?
2006-12-09 by Steve Kale
I use profiles with Adv B&W all the time and would not use it without it. I suspect that if you pass a profile to the Adv B&W driver and ask in PS for the
Re: [Digital BW] Re: Any 3800 users
2006-12-09 by Richard Smallfield
... I fed an 820mm length into my 2100 through the top feeder. I wonder why they didn t allow the driver to take longer cut paper than that through the top
Epson R220 driver on Mac vs. PC
2006-12-09 by hhchapman4104
I ve been successfully using the Epson driver on a PC to produce nice BW prints with the R220 and UTR2 inks. Thank you, forum! Have just switched to an Intel
[Digital BW] Re: Any 3800 users
2006-12-09 by bwinkjet
Hi, 37.4 Paul
RE: [Digital BW] Re: Any 3800 users
2006-12-09 by Richard Smallfield
What is the maximum length of paper you can feed into it? Can t afford one, but I dream! ta, Richard -- http://smallfield.vze.com
RE: [Digital BW] Re: Any 3800 users
2006-12-09 by gcwagner
What are your thoughts on the 3800. As good as you hoped? I am looking to buy one but have not found anyone who has them available. Does anyone know of who is
Re: Any 3800 users
2006-12-08 by scott_now_coming
... going to test some Museo ... great to hear from some ... BO (Black ONLY)works great on the 3800. Give it a shot! Scott
Golden Trout Workshop (non-profit plug)
2006-12-08 by Paul Roark
It looks like the Golden Trout B&W Photo Workshop is going to happen again this year. The wilderness workshop will occur the week of July 1 - July 7, 2007. I
Any 3800 users
2006-12-08 by John Luke
Any 3800 users here, or is there another group for that unit? I am going to test some Museo Silver Rag and Innova FibaPrint White Gloss for B&W and it would be
[Digital BW] Re: Profile Confusion
2006-12-08 by rgoldman2
Roy, thanks very much.
RE: [Digital BW] Anti-static devices
2006-12-08 by Paul Roark
Thanks to all for the ideas here. I ll be getting some of this solution as soon as possible. The acrylic static drives me crazy. Paul www.PaulRoark.com
Re: [Digital BW] Anti-static devices
2006-12-08 by Mark Savoia
I just got some of this stuff and it works great on scanner glass too. Mark