Yahoo Groups archive
Messages
Page 518 of 564 · 28179 messages matched
2002-08-14 by buechlerjoe
> The "remembering the patch" issue is still there and I'm > still puzzled how to solve it. And I think there is only one > way to really solve it: Keeping the patch until a piece of > music is fully recorded and finished. There's also digital sampling/looping. There's also re-cr
2002-08-14 by petergrenader
My system actually has more control modules than anything else. But that's me...I find the most limting thing about non modular synths is the inability to create control voltage streams. ALong with your ADSRs, may I suggest a trigger modifier and a fixed voltage source (A-165 and
2002-08-14 by Florian Anwander
Hi Kevin > I was simply jumping on the opportunity to make a bit of noise over a > module I'd like to have. :-))))))) Florian -- Florian Anwander |ConSol* HP-Support Tel. +49.89.45841-133 |Consulting&Solutions Software GmbH Fax +49.89.45841-139 |Franziskanerstr. 38, D-81669 Münch
2002-08-14 by code_pig
Florian, I understand. I've seen it said here many times that Doepfer doesn't like to release modules in competition with other manufacturers. I was simply jumping on the opportunity to make a bit of noise over a module I'd like to have. Regards, Kevin --- In Doepfer_a100@y..., F
2002-08-14 by Florian Anwander
Hi code_pig > If what you say is true, then Doepfer wouldn't offer a VCO, VCF, VCA, > EG, or any other module for that matter. I think, you know what I mean. Or? Florian -- Florian Anwander |ConSol* HP-Support Tel. +49.89.45841-133 |Consulting&Solutions Software GmbH Fax +49.89.4
2002-08-14 by code_pig
Florian, If what you say is true, then Doepfer wouldn't offer a VCO, VCF, VCA, EG, or any other module for that matter. There is always room for one more excellent module, and I think a VC BBD would be a wise choice. How about it Dieter? Even Digisound offered a BBD/Reverb module
2002-08-13 by unknown freak
I'm looking at a picture of that SDD1200 and I don't see a CV input. It definitely takes CV? > -----Original Message----- > From: Florian.Anwander@consol.de [mailto:Florian.Anwander@consol.de] > Sent: Tuesday, August 13, 2002 9:57 AM > To: Doepfer_a100@yahoogroups.com > Subject:
2002-08-13 by Florian Anwander
Hi ethan > Will Doepfer ever produce a VC Delay? As far as I know: No. I know that he does not like to establish a product, which is aleady available by an other manufacturer. There is no sense for him. And I have to say, that I can use nearly every digital delay from the 90ies f
2002-08-13 by ethanzer0
> now what the A100 really needs > is a vc quadrature osc and a vc > delay Indeed. I find my self wanting a Blacet time machine. Will Doepfer ever produce a VC Delay?
2002-08-13 by ringmod45
hi bakis, hope your trip was a good one. i am sure things are moseying along with the development of the TSKB(Touch Sequencer Keyboard). i have completed the poll for the TSKB. there are presently 204 members on the list.i would like to thank the 9 members who took the initiative
2002-08-13 by buechlerjoe
> Would you choose the A142 over the > A141 if you had the choice? And how > about the A147 over the A145? I have three ADSRs and three LFOs in my four-row system. One of the ADSRs is the A141 VC ADSR, and one of the LFOs is the A147 VC LFO. The others are the plain A140s and A14
2002-08-13 by ringmod45
--- In Doepfer_a100@y..., "ethanzer0" wrote: > "buechlerjoe" wrote: > > Likewise, a third ADSR would give > > you dedicated VCO, VCF and VCA > > Would you choose the A142 over the > A141 if you had the choice? And how > about the A147 over the A145? hi ethan, if it possible, get
2002-08-13 by bakis Sirros
hello list, why don't you do something else? sync the sq10 with the a100 and sequence the ms10 from the sq10 that's what i do!i have the sq10 and ms10,ms20.all you need to do is pass the clock pulse from the a100 thru the a165 trigger modifier and send it to the ext.control step
2002-08-13 by ringmod45
hi ethan, first off it's a discrete design, i.e no curtis chips. second, it has variable vc of the waveshapes, think EMS vcs3 only with vc for very animated sounds. third, the sync input behaves differently from doepfer. fourth, the rs95 responds linearly to input control voltage
2002-08-13 by code_pig
Ethan, The A191 is one of the more esoteric "must have" modules. The MIDI sync'ed LFO is something I value most of all about the module. You need this module. Joe got it 100% correct in his assesment. Mult's and mixers are ALWAYS in short supply, and something you should seriousl
2002-08-12 by ethanzer0
"buechlerjoe" wrote: > Likewise, a third ADSR would give > you dedicated VCO, VCF and VCA Would you choose the A142 over the A141 if you had the choice? And how about the A147 over the A145? > one A180 and one A138a linear mixer, > smack in the middle of each row for > "fan-in" a
2002-08-12 by ethanzer0
wrote: > Well, to put it my way, the a110s are useless to me, the a111 are > okey, but the Analog Systems 95 VCOs are the best for a doepfer > rack. What makes this AS-95 VCO so desirable over the other choices? Thanks again, Ethan
2002-08-12 by buechlerjoe
The way my mind works, there's three kinds of modules that you add to your "shopping list" as you're going along: Scale-up modules: more VCOs, VCFs, ADSRs, LFOs. I'd be adding a third oscillator to fatten up the sound and get rid of phase cancellation if I were you, A110, 111, 11
2002-08-12 by Sebastian Schnitzenbaumer
Josef, all, I think it is time for me to give an update on my A-100, now that I've spent a considerable amount of time with it (like on average an hour or so every day for the last 6 weeks). I'm sort-of stuck now. Maybe someone can help me. I need to explain how I use my A-100 Mi
2002-08-12 by Andreas Lindholm
Well, to put it my way, the a110s are useless to me, the a111 are okey, but the Analog Systems 95 VCOs are the best for a doepfer rack. ----- Original Message ----- From: "ethanzer0" To: Sent: Monday, August 12, 2002 5:40 PM Subject: [Doepfer_a100] Request for Advice > Hello, > >
2002-08-12 by Roel Steverink
Hi all, As I told many moons ago that I had my two cases of A-100 (both 3U) loose in a open rack space. Not the ideal situation, tell me! So at last I bought 3 inch racks to mount them in. Putting these together wasn't a easy task. I had to use a large hammer to get it together!
2002-08-12 by Roel Steverink
Hi David again, Thanks for your comments! Yes, it is obvious that it is written for university students. When I read the text I feel a student myself, almost seeing Strange in front of me patching away in the middle of the Arena. Although I never went to college, I have a pretty
2002-08-12 by Stinchcombe Timothy
Hi Florian, > > If you have A-111's, in theory you should be able to stick > the Hz/V CVs > >into the linear FM input on the A-111 > Sorry, but this is not so easy :-( The linear FM input is > dc-decoupled. So > any steady voltage (like a held note) will look like zero Volts. > >
2002-08-12 by David Salter
Roe, Although Alan Strange's book can be a bit tough, remember it started life as a manual for students taking a degree in electronic music. Keep at it though, it is a fine text. Try out the examples and try to take the time to explore each module on it's own or with other module
2002-08-12 by ethanzer0
Hello, I own a A-100BS Suitcase and have been very pleased with it. I am about to buy another batch of modules and find myself having a little trouble deciding what to purchase. I know I am going with a G6 frame, but, other than that I can't decide. Should I get any A-111s? Are t
2002-08-12 by Florian Anwander
Hi Tim > If you have A-111's, in theory you should be able to stick the Hz/V CVs >into the linear FM input on the A-111 Sorry, but this is not so easy :-( The linear FM input is dc-decoupled. So any steady voltage (like a held note) will look like zero Volts. You first have to de
2002-08-12 by Roel Steverink
From: David Salter Date: Mon Aug 12, 2002 10:02 am Subject: RE: [Doepfer_a100] Re: Of interest to list members Hi David, I got it by mail, in zipped format. I downloaded and unzipped it on my computer. I noticed how simple André Stordeur explained it all. His drawings were perfec
2002-08-12 by Stinchcombe Timothy
Hi John, > I may be purchasing an old Korg SQ-10 sequencer which sends its > signal out in Hz and not 1v/Octave. Does anyone know of a patch so I > can convert this and seq my A-100 from the SQ-10? If you have A-111's, in theory you should be able to stick the Hz/V CVs into the l
2002-08-12 by buechlerjoe
> ...patch the Hz/V signal to the CV input of an A121 > exponential VCA, It's even better if you mention the -correct- module number ;-) Joe --- In Doepfer_a100@y..., bakis Sirros wrote: > hi list, > i agree with david. > despite the fact that i know most of the module > numbers
2002-08-12 by David Salter
Hi Roel, I also bought the tutorial (a single floppy disk if I remember right) years ago and it was my prime source until I got hold of DR Alan Strange's book. Pretty good sources, both of them. Regards David Salter Reuters Consulting Tel: +44 20 7542 2402 Mob: +44 7990562402 Fax
2002-08-12 by Florian Anwander
Hi John > discontinued chips. The a-111 hi-end VCO and the new A-109 signal > processor both use curtis chips no longer made. For the A111 Doepfer always commented, that the 3340 might be a problem: "The A-111 modules are sold while quantities last as the special circuit CEM3340
2002-08-11 by jmaddocks1975
Hi list, I have a slight concern, doepfer have 2 modules that use discontinued chips. The a-111 hi-end VCO and the new A-109 signal processor both use curtis chips no longer made. What if these chips fail in a year or 2, we're gonna have serious difficulty getting them repaired.
2002-08-11 by buechlerjoe
The only possible difficulty, as I see it, is that the Hz/V sequencer will be sending a pitch CV to the A100 that increases exponentially as you adjust the pitch control upwards. (Do I have that right, and am I thinking about it backwards?) The A100 is expecting a linear voltage,
2002-08-11 by jmaddocks1975
Yeah, I thought about this the night I posted the question. Each note is independent so just turn the knob until its correct. I've bought the Sq-10 just waiting delivery and last week received delivery of my 1st analogue solutions modular. The integrator modules are defintely rea
2002-08-10 by andrewdalio
--- In Doepfer_a100@y..., "jmaddocks1975" wrote: > Hi List, > I may be purchasing an old Korg SQ-10 sequencer which sends its > signal out in Hz and not 1v/Octave. Does anyone know of a patch so I > can convert this and seq my A-100 from the SQ-10? > > I can do it the opposite wa
2002-08-10 by modularplanet
Hi Sebastian, > I'd love to spend more time > finding out more about patches on > the web. I think there are only a few sites with A-100-patches (what a pity!!). > I have only found: > http://www.modular-planet.de so > far. Unfortunately the patches are > not grouped by module se
2002-08-10 by buechlerjoe
I haven't tried this, but I think you should be able to patch the Hz/V signal to the CV input of an A121 exponential VCA, with a fixed voltage, such as from the A176 CV source, to the A121's signal input jack. Adjust the attenuator knobs until you get the Volt/Octave tracking cor
2002-08-10 by Andreas Lindholm
----- Original Message ----- From: "petergrenader" To: Sent: Saturday, August 10, 2002 7:15 AM Subject: [Doepfer_a100] Re: voltage inversio n of CV signals/Other brands > I've got both Analogue Systems, Analog Solutions, Doepfer, > Blacet, Buchla (albiet modified), MOTM, Oakley a
2002-08-10 by jmaddocks1975
Hi List, I may be purchasing an old Korg SQ-10 sequencer which sends its signal out in Hz and not 1v/Octave. Does anyone know of a patch so I can convert this and seq my A-100 from the SQ-10? I can do it the opposite way, seq my MS10 from my A-100. I have a trigger invertor so it
2002-08-10 by petergrenader
I've got both Analogue Systems, Analog Solutions, Doepfer, Blacet, Buchla (albiet modified), MOTM, Oakley and homebrew all happily singing together. I even went ahead and made faceplates for the Blacet stuff so it was 3RU high. To see it, go to: http://www.allegrobikes.com/synth.
2002-08-09 by Roel Steverink
From: David Salter Date: Mon Aug 5, 2002 10:02 am Subject: Of interest to list members Hi David, I know this guy. Not personal. But he sold me a tutorial of analog modular synthesis via internet. He cruises the world colleges to teach students about analog synthesis. I know also
2002-08-09 by ringmod45
--- In Doepfer_a100@y..., Florian Anwander wrote: > > paces. but my heart really lies with the Matrix 12 multimode filter, > > if ddoepfer were to produce it i would buy 4 of them right away. > Hmm, I would prefer a non CEM based Filter, since Doepfer has already three > types an
2002-08-09 by jmaddocks1975
Analogue Systems, Analogue Solutions, Blacet etc modules are all compatible in terms of interfacing with each other. However, if you want to put them in the same case you will need something to convert the power connectors. I have Analogue Solutions modules in my doepfer case whi
2002-08-09 by Roel Steverink
From: "unknown freak" Date: Wed Aug 7, 2002 8:09 pm Subject: RE: [Doepfer_a100] Re: New A 100 user in Belgium says hello I fully agree. The medium here is english, let's keep it this way. Roel. "unknown freak" wrote: Given that you're probably the only two who would understand a
2002-08-09 by mdimmm@hotmail.com
Many thanks for the suggestions for 16-way cables etc. I've now got my A-174 sitting on the desk in front of my system, connected with three feet of cable to the busboard. The vertical position of the joystick greatly enhances the control of it, IMO. I haven't actually gotten aro
2002-08-09 by Florian Anwander
Hi everybody, Sorry for the offtopic: Is someone here experienced with the Yamaha DMP7 digital console - or even has a service manual for it? I got two from ebay, and one of them has troubles with the userinterface (MIDI-works fine). Florian -- Florian Anwander |ConSol* HP-Suppor
2002-08-09 by Florian Anwander
Hi ringmod45 > hi bakis, how limited? more or less than a 100 units? this chip was > used in the Prophet VS ( one of my favorite poly's along with the > Matrix 12 and Elka Synthex). here is the url for the .pdf doc for the > chip, Not only this one, nearly every hybrid synthesize
2002-08-08 by ringmod45
hi bakis, how limited? more or less than a 100 units? this chip was used in the Prophet VS ( one of my favorite poly's along with the Matrix 12 and Elka Synthex). here is the url for the .pdf doc for the chip, http://www.synthtech.com/cem/c3378pdf.pdf bakis could you interest mr.
2002-08-08 by vcovcfvca2002
Thanks to everyone who gave me info on connecting the A100 and the System 100. I tried it just now and it works. Fairly simple and lots of nice modulation possibilities via the checkpoints/patchpoints on the System 100. This list is great. Thanks for the support Paul
2002-08-08 by bakis Sirros
hi list, i don't know if anyone has noticed it, but a new module will be available from october. it is a combined 24db lowpass filter/VCA/panning vca. it is a limited edition because of the curtis chip used. go to the doepfer site if you want more info. bakis. ===== synthfreak(pa