Yahoo Groups archive
Messages
Page 75 of 109 · 5429 messages matched
2005-05-29 by Colin Ross
Hi all After looking at the last few emails I'm writing this to say that if this sort of thing happens again I will ban members from our forum. This will happen without warning. So all have been warned. Regards Colin Moderator
2005-05-28 by Laurent Lemaire
Hello, Why not posting a screen shot of your Mfx2 when it is at the "BOOT ROM" step ? This gives a lot of information about the configuration. It is often done this way on eBay.... Regards. Laurent.
2005-05-28 by james
no analog router card= no direct to disc. So you don' t have a real Mfx2. And I' m sure the futur owner of your old crapy serie3 has absolutly no interest in your music and the 80000 morons who bought your album. He will just be worried about his fake mfx2 ! My sounds and my musi
2005-05-27 by linear226@excite.com
hi james (small j) the 80,000 people who bought my records dont care if I use a router. Lets see a picture of your mfx2 you bullshitter. PS Get back in your pram PPs seeing as you spend most of your time surfing the web rather than making music check out my music artist LA synthe
2005-05-27 by james
perhaps juste the price ? ----- Original Message ----- From: "James Thomson" To: Sent: Friday, May 27, 2005 8:32 AM Subject: Re: [Fairlight-CMI] Re: For sale: Fairlight Series III MFX2RACKMOUNT! > Hi James, > > In fact the 9 gig drives are perfect as they will format to 4095 mega
2005-05-27 by James Thomson
Hi James, In fact the 9 gig drives are perfect as they will format to 4095 megabytes and function perfectly. There is no advantage to having a 4 gig drive at all over a 9 or 36 gig drive. The latter are often easier to find. Regards, James Thomson Magic Audio Co. The Studio West
2005-05-26 by paradyse_james
the 9gb are useless as they can' t be formated over 4gb. So buy on ebay some 4gb for a few cents and you will be happy ! --- In Fairlight-CMI@yahoogroups.com, Chris Haworth wrote: > Philip, > > With reference to your note below, would you be willing to sell one of the > spare SCS
2005-05-26 by paradyse_james
strange MFX2... where is the analog router card ? --- In Fairlight-CMI@yahoogroups.com, "vortexian226" wrote: > Hi peeps > just to let you know i've uploaded some pics of my mfx2 before it > goes onto ebay
2005-05-26 by vortexian226
Hi peeps just to let you know i've uploaded some pics of my mfx2 before it goes onto ebay
2005-05-26 by Malte Rogacki
Reserve price auction. I don't know what the seller is expecting, though. -- Malte Rogacki gacki@gacki.sax.de ---------------------------------------------------------------------------- "Don't forget to TURN ON THE SYNTHESIZER. Often this is the reason why you get no sound out o
2005-05-26 by Chris Haworth
Philip, With reference to your note below, would you be willing to sell one of the spare SCSI drives you have, and if so how much would you be looking for? Regards, Chris. _____________________________ 00 44 (0) 20 7021 8273: Office 00 44 (0) 7973 960586: Mobile christopher.hawor
2005-05-24 by James Thomson
Hi Brian, I was lucky and managed to buy a brand new 8 \u201c drive here from a private seller here in the U.K. The CMI series 3 and CMI 2X use the same 8 R20; drives. Normally Mitsubishi , YE Data or Qume. My CMI 2X has two YE Data YD 180 drives. SCSI is completely different. I
2005-05-24 by Brian Ronn
Hi James, I've read that it's not adviserable to extend a SCSI cable longer than 18 feet. If you need a longer distance, you should have a SCSI repeater box in between. Granitedigital have repeaters for 50 pin SCSI: http://www.granitedigital.com/catalog/pg04_repeaters.htm James,
2005-05-24 by James Thomson
Hi Guys, I have just bought a 8 " floppy drive which is in its own external powered case. The idea is that I want to use this drive for my sound disks but have it in front of me, most likely on the CMI keyboard itself. Do any of you know what is the longest cable I can run from t
2005-05-23 by Peter Connelly (Core Design Ltd.)
Hi everyone, Sorry for the random plug, but I've formed a new group, dedicated to the Roland MKS-80, if anyone's remotely interested ;-) http://launch.groups.yahoo.com/group/MKS-80/ Cheers, Peter This e-mail is confidential and may be privileged. It may be read, copied and used o
2005-05-22 by Peter
Hi everyone, I asked this a few years back, but never got an answer, so thought as we've had many new members since, including the legendry Peter Vogel, thought I'd pop the question again. Hopefully someone can enlighten me. It's doing my head it :-/ I have never been able to get
2005-05-22 by ozidudeau
Are there still any Fairlight CMI IIx machines in Australia? I've seen a Series III before but not a IIx and would love to see one of these technological marvels operating. Any help in achieving this quest greatly appreciated. cheers Antony ozidudeau@yahoo.com
2005-05-19 by James Thomson
Hi Kevin, Well, I have to say that if anyone knows of a CMI 2X spares stockpile I couldn't imagine that they would tell anyone ! :-) I look forward to seeing the photos of the rebuild,thanks for sharing that with us. I would be interested in what the sound library is like. Kevin,
2005-05-19 by Peter Connelly (Core Design Ltd.)
yeah, this was the 2nd time it had been listed. I think there could've been some speculation to wether it was fake or real too... It didn't sell! P -----Original Message----- From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]On Behalf Of Marcin 'Rambo' Rog
2005-05-19 by Marcin 'Rambo' Roguski
On Wed, 18 May 2005 23:11:11 -0000 "Peter" wrote: > Item #7321597020 Haven't I seen that before?
2005-05-19 by kevin kelley
I am picking up another series IIx this weekend does anyone know of a good source for parts for the series IIx machines? Mainly I will need to replace or rebuild the Main processor card due to battery leakage. The drives may need some work as well but I have replacement drives. I
2005-05-18 by Peter
Item #7321597020 Is this definately a rev 9.34 machine? Check out the loading screen screen (where the Fairlight logo and address is displayed). I've not seen one like this and It's dated 1991, whereas my 9.34 is dated 1992... Any differences? Cheers, Peter
2005-05-17 by Marcin 'Rambo' Roguski
On Tue, 17 May 2005 13:19:04 -0000 "horiprod" wrote: > Hi Guys (and ladies). > > I've finally got a testbed IIX, and the first thing I did was to run it > with a small 16:9 LCD screen. I have a jpg, but how can I attach it to > a posting ??? For web interface to yahoogroups, you
2005-05-17 by Marcin 'Rambo' Roguski
On Mon, 16 May 2005 19:05:10 +0200 Malte Rogacki wrote: > > Sorry for that but looking for a Roland D-550 at reasonable (meant: > > less than $270- prefferable ~$200) price. > > What about this one: > > http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=18051&item=7322950497 T
2005-05-17 by Marcin 'Rambo' Roguski
On Mon, 16 May 2005 18:24:09 +0100 "Peter Connelly \(Core Design Ltd.\)" wrote: Paypal only
2005-05-17 by horiprod
Hi Guys (and ladies). I've finally got a testbed IIX, and the first thing I did was to run it with a small 16:9 LCD screen. I have a jpg, but how can I attach it to a posting ??? Regards, Peter Wielk in sunny Sydney... PS: I'm working on 3.5" floppy drives, and hard discs too....
2005-05-16 by Peter Connelly (Core Design Ltd.)
or this one: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=64386&item=7321740757&rd=1 Blimey... These are dirt cheap now! I remember seeing these go for around £250+ not too long ago. P -----Original Message----- From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CM
2005-05-16 by Peter Connelly (Core Design Ltd.)
That's a ruddy good price! Go go it Rambo! I just got a JD-990 the other, with SR-JV Orch board fitted (although I want rid of this card and replaced with the Vinatge Synth board). What a wicked synth the JD is... I don't know why people compare them to the JV/XV/etc. They look s
2005-05-16 by Malte Rogacki
> Sorry for that but looking for a Roland D-550 at reasonable (meant: > less than $270- prefferable ~$200) price. What about this one: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&category=18051&item=7322950497 -- Malte Rogacki gacki@gacki.sax.de ---------------------------------
2005-05-16 by Marcin 'Rambo' Roguski
Sorry for that but looking for a Roland D-550 at reasonable (meant: less than $270- prefferable ~$200) price. I'm in Poland, so best around that place or neighbourhood. Of course, any offer is welcome (but suggest shipping costs). Rambo -- DalNet is like the special olympics of I
2005-05-16 by Tim Curtis
Thanks James - That Syco one has been bothering me for years. One of the only missing pieces of the puzzle. My IIx is pretty much "fully loaded" - it's got the analog interface, the slave keyboard, and it's the last one they built. One of the only things missing is the Syco inter
2005-05-16 by James Thomson
Hi Tim, No, my CMI 2x did not come with the breakout box. I do not know of anyone who has the interface for the Syco \u201c conductor \u201c card. Maybe some other guys on the list know some more about this card. It has been very quiet here lately but maybe it will pick up soon !
2005-05-16 by James Thomson
Hi Tim, The luxury to have all of that space ! I would be interested to know more about your Prophet 5's. I am a big Sequential fan and would be curious to know the Rev's/condition and serial numbers. Good luck with finding a good series 3 ! I would recommend a OS 9.34 CMI with t
2005-05-16 by James Thomson
Hi Tim, My CMI 2X came with the CMI-07 card installed and wired up to two multiway D-connectors on the rear of the CMI. I noticed that out of all the cards the CMI-07 generated the most heat. I had Peter Wielk do a Papst fan modification significantly reducing the noise of the CM
2005-05-16 by Tim Curtis
Hi James - Thanks for the response. Do you have the breakout box for the CMI-07? Makes it much easier to use. Also, did your Conductor card come with it's interface? Thanks, Tim James Thomson wrote: > Hi Tim, > > My CMI 2X came with the CMI-07 card installed and wired up to two m
2005-05-16 by Tim Curtis
How many people out there are using the CMI-07 with the analogue interface box? I've got one for my IIx, but never really did much experimenting with it. Keep meaning to work with it more. Also, I've got a card made by Syco Systems called "The Conductor", which is a sync card use
2005-05-16 by Tim Curtis
Hi Everyone - I've been cleaning up the studio, the shop, the storage area, and the rest of the house, and I'm coming to thr realization that I might simply have too much stuff - I don't know what I'll ever do with 3 Prophet 5s, 3 Pro Ones, 2 Minimoogs, etc. Some of these duplica
2005-05-09 by Malte Rogacki
That's the one that was recently listed and subsequently deleted: Maybe somebody should contact the seller to inquire about the circumstances. -- Malte Rogacki gacki@gacki.sax.de ---------------------------------------------------------------------------- "Don't forget to TURN ON
2005-05-08 by fairlight2x
Hi everyone - Although my CMI IIx is like my child, I just don't seem to be able to spend much quality time with it these days. With that in mind, I was curious to know if anyone could suggest some "classic" or interesting voice combinations that use the stock library... For exam
2005-05-07 by Harald Feldmann
Hi Tim, > I took a look at the back again,. In very small letters it says > "Fairlight MFX 3 Plus". > The reson I'm asking is because I'm wondering if I can instead set this > up as a standard MFX3, which I guess can use the CMI software. No, only a CMI with MFX2 capability can b
2005-05-07 by Tim Curtis
Okay, so I'm an idiot... I took a look at the back again,. In very small letters it says "Fairlight MFX 3 Plus". Okay - here's a new question: I see that the main difference between the MFX3 and the MFX3 plus is the change in the main processor cards being replaced by the ESP-WX
2005-05-06 by james
you have a MFX3, no cmi inside , its only a direct to disk. A sort of downgrade compared to the mfx2 which is the only fairlight to support dtd and cmi. you can use it for sound post production. ----- Original Message ----- From: "modularmoog" To: Sent: Friday, May 06, 2005 8:38
2005-05-06 by Peter
....(I can still pick up 4Gbyte hard drives OK!).... Hi Peter, Any idea when you will be sending mine? You mentioned it has 11.39 commands on there or something, along with some additional libraries to the ones I have (thanks), but is it simply a case of swapping this new drive f
2005-05-06 by modularmoog
Hi Everyone - Perhaps someone here can enlighten me... On a whim, I bought this "MFX" that had previously been listed on a certain auction site, knowing that it had no cards in the cage. I was also told that it had no power supply, but that was incorrect. All of the I/O cards are
2005-05-06 by Marcin 'Rambo' Roguski
I don't know what's funny about that... maybe you'll find out :-p (please don't drink or eat anything, while opening the URL, you may choke) Logo of Brasilian Institute for Oriental Studies. Pagoda with sunset in the background... -> http://www.cfh.ufsc.br/~oriente/
2005-05-03 by kevin kelley
Well I have decided to sell all of my vintage synth collection except my fairlight. I love my IIx but the rest will have to go so I can dedicate more time to the IIx. I have a large library but would love to know if anyone else on this list would be interested in trading disks if
2005-05-03 by Marcin 'Rambo' Roguski
>TC Electronic M2000 > >Excellent condition and has the newer, more reliable, power supply installed How much for this one? ..and more important, where the heck is my K3 ;-) (no, I didn't get it yet, is there a way to track it?)
2005-05-03 by JOHN HOPKINS
Would have been bargain at £1000.01 but not £2300. It would be interesting if the people who won the machines got in touch & let us know if they worked. This may come in useful for future auctions. By the way I won the Roland S-770 for £73 & will hopefully collect it on Saturday.
2005-05-03 by Peter Connelly (Core Design Ltd.)
Sorry for the random mailshot guys, but it's that time of year and I have some music gear for sale (again). If you're not interested, then I'd really appreciate it if you could pass this onto anyone that might be :-D Roland MKS-50 Alpha Juno in a rack. Immaculate Roland MKS-10 16
2005-05-03 by Peter Connelly (Core Design Ltd.)
You outbid me by 1p then ;-) lol -----Original Message----- From: Fairlight-CMI@yahoogroups.com [mailto:Fairlight-CMI@yahoogroups.com]On Behalf Of john945277 Sent: 30 April 2005 15:22 To: Fairlight-CMI@yahoogroups.com Subject: [Fairlight-CMI] series 3 on ebay. Just to let you guy