Re: [QuadtoneRIP] Re: Install QTR for Artisan 50
2011-03-07 by Roy Harrington
There s not a lot of variation that you can do. You can add small amounts of color to vary the tone but that about all. It s all experimentation to see what
Messages
Browse messages
Page 136 of 318 · 15852 messages matched
Re: Install QTR for Artisan 50
2011-03-06 by jwelter
Hi Roy, Thanks for your quick reply. Installing via Bonjour worked great. Generally QTR works with the Artisan 50. I was able to print. So I started to play
unable to print Quad4000, OS X
2011-03-05 by daftdada
Hello, I m using a G5 running OS X (10.5.4), and am unable to print using the Quad4000 RIP. After selecting print I open the print dialogue and it shows the
Re: downloading/Instaling QuadtoneRip
2011-03-04 by shileshjani
Janet, Did you exactly follow install instructions per the tutorial linked below. It clearly states that you OS X 10.6 Snow Leopard is supported.
R1800 and force GLOP using matte paper selection via Epson Driver?
2011-03-04 by Scott West
I m asking about this approach to getting the best color output out of my R1800 due to the knowledge of those that use different ink sets in their printers for
Re: [QuadtoneRIP] Install QTR for Artisan 50
2011-03-04 by Roy Harrington
The Artisan 50 isn t supported but you are right that the specs look very similar so it may be possible that you can pretend its an R280 and use that driver.
Install QTR for Artisan 50
2011-03-04 by Juergen Welter
Hi, I am a QTR rookie and have an Artisan 50 Printer. It does not seem to be supported for QTR. But since it is the successor of the R280 I still have hope to
Re: ink pattern page calibration mode -need confirmation
2011-03-04 by dkosiur
See my message of Feb 28, 2011 (#9260) documenting the steps I took to successfully print an ink separation page on my Mac using OSX 10.6.6 and Photoshop CS5.
Re: [QuadtoneRIP] Re: ink pattern page calibration mode -need confirmation
2011-03-04 by Janet Reider
Something tells me this is my problem - I will try a print using CS3 (still alive on my MAC) and see what happens. It s also possible that having an OS X
Re: [QuadtoneRIP] Re: downloading/Instaling QuadtoneRip
2011-03-04 by Janet Reider
Hi - Thanks for your offer of help. My printer is an Epson 2200 - so those are the printer profile ink sets that I checked in my download. On the print
Extream profiles for digital negatives?
2011-03-04 by mysteriousmirage
Hi, I m hoping someone can help me, i m kind of new to this and i m attempting to create a profile for making digital negatives with Pictorico OHP on my stock
Re: downloading/Instaling QuadtoneRip
2011-03-04 by shileshjani
Janet, I have read these threads, and I have not been able to find which printer and inks you are using. With QTR it is essentail you match the curves/profiles
Re: QTR-create-icc question
2011-03-04 by natebroshot
Ah, ok interesting. Thanks Susan. So what you re saying is just increase the actual size that the original step file prints at? And maybe that way the i1 has
Re: ink pattern page calibration mode -need confirmation
2011-03-03 by drake.david42
I think I found the problem in Adobe Forums: ...yes, printing in OS X 10.5.8/10.6.2 and Photoshop CS4 with certain driver (notably the recent Epson drivers)
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-03 by Janet Reider
Can you look at the DaignosticScript.command that i have copied and pasted and try to help me rectify this situation. The prints are no longer striped but
QuadToneRip -unable to connect to printer
2011-03-02 by Ron Brown
I am using a MAC Book Pro OS 10.6.6 with an Epson 4880. It all works fine, PS CS5, when I try to use QuadToneRip 2.7. it is unable to connect. I know it s a
Re: QTR-create-icc question
2011-03-02 by slcphoto73
I m no expert, and I am on Windows, but I sure have had this problem. My solution was to create a tif file, derived from the original step etc. file, with very
QTR-create-icc question
2011-03-02 by natebroshot
Hi, I m a mac user and after spot measuring with my i1 in Profile Maker the Step-21x4-random.tif grayscale printed target. I drop the resulting saved .txt
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Janet Reider
Should i have installed any more than the printer profile? Curves, for example? Well you ll see what I ve got when you look at the Diagnostic Script - ... --
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Janet Reider
Hello Doug, I performed a nozzle check as well as a cleaning and the print-out is perfect. I was able to replace the incorrect printer profile with the correct
Re: Mac with Windows
2011-03-01 by Rusty Sterling
D OH! Didn t know that. I did as you suggested and I m printing an image as I type this. So I did not have to reinstall QTR. Thanks!
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Doug Taylor
When in QTR printer settings, you need to choose the Curve that matches your Ink Set, such as UC; choose the media that matches what paper you are printing on,
Re: [QuadtoneRIP] Mac with Windows
2011-03-01 by Myron Gochnauer
... Have you checked to see whether the USB printer device is enabled for Parallels? Device / USB / ... If the device is one of the enabled USB devices,
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Janet Reider
Thanks Doug, I ll check it - nozzle etc. However, it also could be that I ve set it up wrong by putting in an incorrect printer profile - K7 and it
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Doug Taylor
Janet, sounds like the vertical stripes could be banding. Try a head cleaning and then a nozzle check to see that all nozzles are working properly and not
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-03-01 by Janet Reider
Thanks Doug, I finally figured it out,, tried to print some B&W images and they were terrible: dark, tiny vertical stripes, etc. I m wondering what I can
Re: ink pattern page calibration mode -need confirmation
2011-02-28 by drake.david42
james, I m getting virtually the same result with your new settings. The cyan starts out fine and then becomes green by around 50. the yellow turns brown at 25
Re: [QuadtoneRIP] downloading/Instaling QuadtoneRip
2011-02-28 by Doug Taylor
Go to Applications, QuadtoneRIP, Profiles, open the folder for your printer model number, click on Install(your printer number).command Go to System
downloading/Instaling QuadtoneRip
2011-02-28 by janet
I ve bought it - have accessed the download pg. I don t see the Install-QTR-#.#.#. package to click on. I ve printed the 19 pg tutorial but can t get
Mac with Windows
2011-02-28 by Rusty Sterling
I don t know if this has been an issue for anyone else. I have an iMac with a partition set up for Windows. Using Parallels to launch Windows while in the Mac
Re: [QuadtoneRIP] Re: R200 Using K6 QuadTone Driver
2011-02-28 by Rusty Sterling
Hi Jon, I appreciate the confirmation. I kind of figure that is what was happening. I ll be getting the MIS UT-R2 inks this week. Only thing is that there
Success! Ink separation print for 3880, PShop CS5 and OSX 10.6
2011-02-28 by dkosiur
Some of this workaround may have already appeared in other postings, but I thought it worthwhile to post what settings worked for me with the latest version of
Re: R200 Using K6 QuadTone Driver
2011-02-28 by piezobw
Rusty, If you are using the K6 driver and are printing too magenta - it is because you have not installed the K6 inks and are still relying on your color inks.
Re: R200 Using K6 QuadTone Driver
2011-02-28 by Rusty Sterling
Yeah, I get it. Another issue I would have is using Photoshop CS5. So I have Windows 7 installed on another partition of my iMac and I ll just us the Windows
Re: [QuadtoneRIP] Re: R200 Using K6 QuadTone Driver
2011-02-27 by Mike Finley
Tom s user guide is primarily for Windows users, and qtrgui is Windows only. On Windows this is the only way to print using QTR; it can t be done direct from
Re: R200 Using K6 QuadTone Driver
2011-02-27 by Rusty Sterling
Nevermind. I rushed into things much more blindly than I realized. As far as my R2880, I m going to just continue using the Epson driver and print ABW. For the
Re: R200 Using K6 QuadTone Driver
2011-02-27 by Rusty Sterling
Let me add to this. First off, I m on a Mac OS 10.6.6. Second, I installed and set up my QTR print Drivers using the Basic Tutorial for Mac OS X. After running
R200 Using K6 QuadTone Driver
2011-02-27 by Rusty Sterling
At first, nothing would print. Now it is printing but the results are horrible -- a lot of magenta. So here is what I see when setting up the driver: 1. Color
Re: [QuadtoneRIP] ink pattern page calibration mode -need confirmation
2011-02-26 by James Higgins
Assign sRGB, it won t work otherwise. Print with Calibration Mode on in QTR, Photoshop Manages Color, Perceptual, Black Point Compensation, and sRGB as the
ink pattern page calibration mode -need confirmation
2011-02-26 by drake.david42
Hello first post on this group. I ve just printed an ink pattern page to discover the UV transmission of the various inks with my process. I m just a little
High Sierra B&W Photo Workshop
2011-02-26 by Paul
(Also posted on the B&W Digital print forum.) We still have several spots open in the workshop Roy Harrington and I host each summer in the southern High
Re: [QuadtoneRIP] Re: Inkseparation.tif printed completely gray
2011-02-26 by Phil
Re: Inkseparation.tif printed completely gray
2011-02-26 by mikoyan_simonov
It is working now, thanks to the patch. Thank you very much !!
Re: Inkseparation.tif printed completely gray
2011-02-26 by shileshjani
I had something like that happen to me a while back. What I found was that in printer drop down, the Name and Printing Model did not match. You may to
Re: [QuadtoneRIP] Inkseparation.tif printed completely gray
2011-02-26 by Mike Finley
If you re using QTR 2.7.0 you probably need this patch - http://www.quadtonerip.com/QTR2.7.0patch.zip ... -- mike finley photography fine art photography and
Re: [QuadtoneRIP] Inkseparation.tif printed completely gray
2011-02-26 by Harry Lockwood
At least on a Mac, when I choose Calibration mode, the paper choices are grayed out. I simply print on copy paper. Also, the QTR profiles provided for the
Inkseparation.tif printed completely gray
2011-02-26 by mikoyan_simonov
Hello I wanted to print the inkseparation.tif, in Calibration Mode. The proper file is automaticaly selected, all options are OK (?)... But the print is BW, no
Re: Fine art papers and QTR curve selections
2011-02-25 by shileshjani
Dave, I have not made curves for QTR using the original K3 OEM inksets. But using a concoction of 3rd party inks (along with OEM PK), I have found the L values
Fine art papers and QTR curve selections
2011-02-21 by dkosiur
Has anyone made a list of which papers fir the different QTR media curves? For instance, do all the Baryta papers (Hahnemuhle, Harman, etc.) use the same curve
Re: Not Printing from Mac 10.6.6
2011-02-18 by john
Once again, I really appreciate your help Roy. I sent your instructions on to my friend. She is printing fine with the ethernet and the epson driver for K3. I