Yahoo Groups archive
Messages
Page 19 of 318 · 15852 messages matched
2018-01-10 by kjersti.botnedal@...
Hi, I am having trouble with paper handling. When using Piezography we need to print two times on glossy paper, ok. I have no problems with the first print
2018-01-09 by Roy Harrington
Hi Stuart I think you ended up using the ancient Stylus Pro 9000 driver which isn t what you want. The new P9000 is compatible with 9900 for the software.
2018-01-09 by stuartr414@...
Hello all. I have previously used QTR on my Epson 9900. I have switched to the 9000, and unfortunately when I download QTR, there are no curves visible. The
2018-01-09 by petrpachl@...
Have anybody tried to use this or similar 4 color tank printer with QTR and turn it into b&w? I know that some people uses L1800 as previous Epson Stylus 1400.
2018-01-02 by petergcane@...
Hi I have a question for the group. Can anyone explain the remap of a clogged nozzle on a Windows machine? I have a curve that I imported as a txt file, which
2017-12-22 by fardy10@...
Hi Again, I found it, It is in fact in the menu after run Print, after i input the curve there are a few choices one of which is paper feed.. Will try it hope
2017-12-22 by fardy10@...
Thanks Garry Douglas and Roy, I am wondering if you are talking about Mac? On my mac once click the Printer & Print Settings, There is a paper size choice,
2017-12-22 by Roy Harrington
The Paper Source selection is different for the Epson driver vs the QTR driver. With the Epson driver its in the paper size selection -- the different sizes
2017-12-22 by Gary Baker
Babak In my version of Print-tool (2.0.0), the feed source is available under Page Setup: Paper and Print Settings. I have used the front feeder on the 3880
2017-12-22 by Douglas Taylor
Babak, In Print Tool, when you choose QuadToneRIP, you’ll see at bottom left the Paper Feed: selection which includes Manual Front. That should resolve the
2017-12-22 by forums@walkerblackwell.com
There isn’t a way. That is why the method was created. Best, Walker ... There isn’t a way. That is why the method was created. Best, Walker On Dec 22,
2017-12-22 by fardy10@...
Hi Keith Thanks for that, I would prefer not to mess around with the printer if possible. There must be a way to make this work. If not i guess I will try this
2017-12-22 by lehuhn@...
Thanks Tariq
2017-12-22 by Keith Schreiber
Not exactly what you are asking for, but it will solve your problem: https://jkschreiber.wordpress.com/2016/08/08/how-to-disable-star-wheels-on-an-epson-3880/
2017-12-22 by fardy10@...
Just tagging on to the end of this old discussion. Having some problems. I want to use the fron feeder on my epson 3880 to print digital negatives due to the
2017-12-22 by Keith Schreiber
Epson PK on the P800 is not problematic in blocking UV. I have measured UV densities of 3.2 and higher and that s not even pushing the limit. (This was with a
2017-12-22 by Tariq Dajani
It may depend on your printer. I print to Agfa Copyjet to make digital positives. With my Epson 3800 I used PK ink. When I replaced it with an SC-P800 I
2017-12-22 by Keith Schreiber
photo Keith Schreiber jkschreiber.com
2017-12-21 by lehuhn@...
Should I be using Matte Black or Photo Black with Pictorico OHP?
2017-12-18 by ctb@...
Hi, My 7890 recently started to show the same D17E error. Did a reset panel in maintenance mode and it seems to work. Kees
2017-12-05 by brian_downunda@...
My six year old R1900 is still chugging along with K7 (P2 actually). The advantage of this printer over either the R2000 or P400 is that the IJM carts can
2017-12-05 by dkosiur@...
I d like to try soft-roofing some of my images now that I ve created the curves for a paper I use. But every time I try to use Data Tool to create the .icc
2017-12-05 by forums@walkerblackwell.com
I suggest the R2000 or (soon) the P400. We have built new-style carts for these which are very good indeed. IMO, the R1900 is end of life. Best, Walker ... I
2017-12-05 by paul cox
Recently, my R1900 of longstanding service died. After some diagnostics by WicReset, it appears to be a Fatal Error in either the printhead or circuit board. I
2017-12-03 by jared bush
I am using Richard Boutwell’s QTP software for profiling a couple of papers. I’ve used it with success with Eboni inksets. Not difficult and pretty
2017-12-02 by daimone@...
Who hijacked this thread? Any possibility the next version of Print Tool might include being able to save a print job with all the printer setup parameters and
2017-12-02 by Roy Harrington
Hi Dave I don t think there s much I can add as far as QTRgui. Any specific limitations are due to the language and libraries it was written with. Seems
2017-12-02 by dtrout@...
More information after some further testing: Print-Tool on the Mac can open both files with no problems. So this is clearly only a problem on Windows using
2017-12-01 by dtrout@...
I m running the latest Windows version of QTR and have run into an interesting problem relating to the size of the TIF file I m trying to print. The file is
2017-12-01 by Paul Roark
I suspect a large number of those who were active on the B&W forum were also on this one. So, it became a bit redundant, particularly after the ABW mode
2017-12-01 by Larry
Can anyone tell me what is going on with Yahoo Groups? I can’t seem to locate or access any of my groups.
2017-11-30 by daimone@...
Any possibility the next version of Print Tool might include being able to save a print job with all the printer setup parameters and referencing placed images
2017-11-29 by forums@walkerblackwell.com
PiezoDN Windows version is also now out of beta and updated with a curve installer. All the best, Walker
2017-11-28 by dtrout@...
Thank you!
2017-11-28 by forums@walkerblackwell.com
Hey everyone, Piezography Community Edition for Windows (and QuadtoneRIP) now comes in installer form. QuadtoneRIP is required before installing of course.
2017-11-25 by ILNVHCLE2EAMSOJJIQ46AJXSE5@...
Hi ebenostby thanks for sharing your thoughts and experience. I mostly agree with you about just choosing a crossover based on K and LK and linearizing to
2017-11-25 by efo@...
That s a great question, and I m sure others in this group will have a better sense of how to do it than I. When I ve done similar things, I ve chosen to
2017-11-23 by ILNVHCLE2EAMSOJJIQ46AJXSE5@...
Hi all I am trying to learn about creating digital negative profiles from scratch and the part that I’m struggling with is with choosing ink crossovers and
2017-11-22 by deanwork2003@...
Yea no kidding. That s super scary. I thought they just resolved something by not resetting chips but replacing them each time on the 700 ml carts when they
2017-11-22 by forums@walkerblackwell.com
As the person who did the blowing up of the printers, I can confirm. It has to do with the head control board. Put the chips (one time ones available currently
2017-11-22 by dtrout@...
Hmmm...I m dubious. Here s what Jon Cone had to say recently in his latest newsletter on this topic: If you re wondering if a solution for the SureColor
2017-11-22 by deanwork2003@...
http://www.ink2image.com/ http://www.ink2image.com/
2017-11-21 by richard@...
I released another set of profiling tools a few weeks ago for people using the standard K3 inksets that make toning and linearizing much easier than all the
2017-11-15 by forums@walkerblackwell.com
Hey everyone. I’ve updated Piezography with several thousand curves. Luminance values down to L*1.79 for the HD-PK (on Canson Baryta Photographique) and
2017-11-15 by dtrout@...
I have macOS High Sierra 10.13.1 (running here under VMWare on my Windows 10 system) with QTR 2.7.7 (latest), Print Tool 2.1.1 (latest) and Piezography Pro
2017-11-14 by bradforddunlop@...
Thanks for the suggestion. I have found that if I stick the transparency to a piece of illustration board and use the Poster Board feed it works just fine. If
2017-11-14 by Roy Harrington
I ve just installed a High Sierra partition and started testing. I had no issue installing QTR driver 2.7.7 or Print-Tool 2.1.1. QTR driver Calibration Mode
2017-11-14 by forums@walkerblackwell.com
You can do this technique that I worked up for the 3880. It’s a little different on the P800 as the printer takes a bit more time to get to the leaf sensor.
2017-11-14 by David Kachel
Use the front feed slot. The pizza wheels are raised if paper is fed through that slot. David Kachel _________________________ Artist-Photographer Fine B&W
2017-11-14 by bradforddunlop@...
Is anyone using the P800 with QTR and if so are you experiencing pizza wheels. If so do you have a solution? Thanks Brad