Re: newbie curve creator
2006-10-02 by melvin9347
... bargain ( from another source ) Two Smooth Pearls for the price that I paid for a packet of classic - and it looks as though I already have a curve for
Messages
Browse messages
Page 259 of 318 · 15852 messages matched
[QuadtoneRIP] Installation problem QTR-OS X
2006-10-02 by Hans & Chia
Hello, I have some strange problems when installing/removing QTR 2.4.2 on a Mac PPC G5 dual core OS X 10.4.7. Any advice to solve them are welcome. Here is the
RE: [QuadtoneRIP] Re: Linearization - how many grey steps? 21, 55, 100? or maybe 21x4?
2006-10-02 by Daniel Staver
I m using an X-Rite 810 densitometer. I will probably upgrade to PrintFix Pro at some point. I tried using a scanner before, and the results weren t bad on
Re: [QuadtoneRIP] Re: newbie curve creator
2006-10-01 by Maris V. Lidaka Sr.
That is correct. Maris
Re: newbie curve creator
2006-10-01 by melvin9347
... change it tomorrow and try your curves when my ink arrives. You have saved me alot of hassle and panic for this comming Saturday. Many thanks again ...
Re: [QuadtoneRIP] Re: newbie curve creator
2006-10-01 by Daniel Staver
I may be wrong, but I thought Ilford Classic Pearl was for dye inks, and that you had to use Ilford Smooth Pearl for pigment inks. In any case I get very
Re: Linearization - how many grey steps? 21, 55, 100? or maybe 21x4?
2006-10-01 by mattchapin2
Thanks David! May I ask, did you achieve your success using 21 steps with a scanner, or a densitometer? I don t have a densitometer myself, but among my
Re: newbie curve creator
2006-10-01 by melvin9347
... Pearl after Tom s comments about bronzing when using gloss as I have to get it right this weekend but I will try modifying your curves for gloss latter as
RE: [QuadtoneRIP] newbie curve creator
2006-10-01 by Daniel Staver
... I ve always compared each value to K and nothing else. Once I experimented with wildly different values on each ink, and it didn t seem to hurt the
RE: [QuadtoneRIP] Linearization - how many grey steps? 21, 55, 100? or maybe 21x4?
2006-10-01 by Daniel Staver
Use the 21step target and just fill up the first 21 spaces. More steps may or may not work. My experiments with more steps were very unsuccessful, with bad
can Epson PM-3700C (1290) install Quadtone RIP?
2006-10-01 by cheungben
Hi, I bought the Epson PM-3700C, the same printer as the 1290. How can I install the Quadtone RIP because the listed printers do not include the 3700c. Thanks,
Linearization - how many grey steps? 21, 55, 100? or maybe 21x4?
2006-10-01 by mattchapin2
Hello, I have a question about linearization. The user guide and QTRGui help tell me to print the file 21step.tif, which linearizes using 21 different grey
RE: [QuadtoneRIP] newbie curve creator
2006-09-30 by Tom Moore
... Yes. You compare LK with K and then compare LLK with LK and the compute its relative blackness to K. ... I haven t used the UT2 inks but I have used the
newbie curve creator
2006-09-30 by melvin9347
Hi, I have an Epson stylus 870 and want to print onto Kodak premium photo paper. I have mot got the MIS ut2 inks yet as my son is bringing them over from the
RE: [QuadtoneRIP] Re: I printed borderless prints...
2006-09-30 by Gary W. Weaver
Just how much paper is wasted when one crops a bordered print?? I wouldn t worry to much, but yes, we would like all things to be exact. gar ... From:
Re: I printed borderless prints...
2006-09-29 by jerkankarlsson
... ok...my mistake. So if i want borderless 5x7 prints i need to print it on a larger paper? Then it will be a lot of paperwaste...hm...
Re: Curves help?
2006-09-29 by Tom Moore
Houston You have posed question that could have a very involved answer. Responding to some of the questions below might get the discussion going. ... With the
Curves help?
2006-09-29 by houstonspencer
Would be very grateful for any advice on how to get started with developing curves to address the common issue outlined below. Having asked once before without
Re: [QuadtoneRIP] Printing with r1800 "manual roll" feed alignment problem
2006-09-28 by Ian Christie
Hi Roy, I don t think it s a problem of the paper mechanism. When I load paper, the printer pulls it in a few inches so that the the paper is parked under the
Re: eliminating blue/green cast on B&W Epson 2200
2006-09-28 by Tom Moore
Are you using the MIS UT7 inks? They have several inksets for the 2200. ... missing--thanks! I can now access ... the tutorial. ... cast. I am using the MIS
Re: [QuadtoneRIP] Re: I printed borderless prints...
2006-09-28 by Roy Harrington
... Borderless is not supported. If you read David s idea , its just cut the borders off after printing. Roy - Roy Harrington roy@harrington.com Black &
Re: [QuadtoneRIP] Printing with r1800 "manual roll" feed alignment problem
2006-09-28 by Roy Harrington
Hi Ian, Someone else had this problem. I ve been looking into it but so far I haven t deciphered the magic sequence that the printer needs. I think I can get
Re: [QuadtoneRIP] Re: eliminating blue/green cast on B&W Epson 2200
2006-09-28 by Maris V. Lidaka Sr.
Optimally, you will probably have to create a custom curve for the MIS inks. Minimally, perhaps experiment with ink color adjustments in the Epson driver after
Re: eliminating blue/green cast on B&W Epson 2200
2006-09-28 by gerdmuller535
Hi, what kind of MIS inks do you use? Gerd.
Re: eliminating blue/green cast on B&W Epson 2200
2006-09-28 by ileanafg
I read the tutorial and installed the printer driver I was missing--thanks! I can now access the RIP settings and have configured them exactly as recommended
Re: [QuadtoneRIP] eliminating blue/green cast on B&W Epson 2200
2006-09-28 by Maris V. Lidaka Sr.
QTR is not accessible through Photoshop - you have to access it independently of PS. See http://www.harrington.com/QuadToneRIP.html and read the Tutorial
eliminating blue/green cast on B&W Epson 2200
2006-09-27 by ileanafg
Hi: I have just purchased and downloaded the quadtonerip software in order to be able to print two black and white prints for an upcoming exhibit. Here is a
RE: [QuadtoneRIP] 8 bit vs 16 bit
2006-09-27 by John Moody
It s twice the data, but maybe not twice the information. :-) Some claim it makes a smoother print, others see no difference. You will have to judge for
Curve Creation Question
2006-09-27 by cubefarmjb
Hi all, if I were to embark on the process of creating a curve for the 2200 K7 PremierArt Hot Press with PrintFix Pro would I essentially follow the Creating
Re: [QuadtoneRIP] QTR on two 2200s-possible?
2006-09-27 by john eckenrode
Thanks Roy The first step you mentioned was the key. Right On John
Re: [QuadtoneRIP] QTR on two 2200s-possible?
2006-09-27 by Roy Harrington
Hi John, Sure, you can do it. Others have mentioned the PC, but Mac setup is just a little different. The first requirement is to run the Install2200 script
8 bit vs 16 bit
2006-09-27 by Thomas Barnes
Apparently, the QTRgui supports 16 bit files, is there a advantage to using 16 vs 8 bit? Is it twice the information when using with a Epson 2200? Thanks,
Re: [QuadtoneRIP] QTR on two 2200s-possible?
2006-09-27 by Maris V. Lidaka Sr.
Maybe it s a Mac bug? :-) Under Windows, the 2 printers generally show up as Epson Stylus Photo 2200 and Epson Stylus Photo 2200(1) or similar - slightly
Best Inkset for QTR with Epson 3000?
2006-09-27 by James Pelton
I recently acquired an Epson Color Stylus 3000, and would like to use it with QTR. Given the use of any appriate paper, what inkset works best with that
Re: [QuadtoneRIP] QTR on two 2200s-possible?
2006-09-27 by Steve and Ann Taylor
I have two 2200s connected to my Win2000 PC and I didn t have to do anything, the second one just showed up in the drop down list of printers. Mine are both
QTR on two 2200s-possible?
2006-09-27 by john eckenrode
Hello All I have two 2200s I d like to hook up to the same computer and drive both with QTR. I can t seem to make it work. I am on a Mac, newest system, newest
Quad 2200 K7 Curve for PremierArt Hot Press 325gsm Availability?
2006-09-26 by cubefarmjb
Hi, does a QTR curve for this paper exist? Cheers, John
UC profiles for HM PhotoRag on the Epson 2200/2100
2006-09-26 by nikosr0001
Hi, I m a newbie here. I guess this has been askes a zillion times but I ve found no info. Are there any curves available for PhotoRag on the 2100/2200 using
Re: I printed borderless prints...
2006-09-26 by jerkankarlsson
... paper. ... I cant make borderless prints? I´ve tried to follow your advice but it wont work? I set the papper to 5,5x7,5 and printed on a 5x7 paper, what
r220 or hp8700
2006-09-26 by DTPHOTO
anybody had any luck with these printers and quadtone rip?? davidtefft.com
Re: QTR, R200, and Entrada curves?
2006-09-25 by Clarence W. Walker
Richard Might there be any baseline settings or profiles or whatever else I would need to get my R200, GQ Quad inks, and Entrada Natural producing even
Printing with r1800 "manual roll" feed alignment problem
2006-09-25 by Ian Christie
I m having trouble printing with QTR on my Epson r1800 through the manual feed in the back. The printer draws the paper in ok but, when QTR starts printing it
Newbie alert: curves issue ?
2006-09-24 by houstonspencer
I ve just run my first few prints via QTR on a 2100. I m just amazed by the quality of what Roy s done, and after a couple of years of listening in on DBWTP,
Re: Available Curves for Mediastreet Quad Black Ink and Mediastreet Paper
2006-09-23 by horstenj
... inks, ... would ... Hi I m afraid I can t answer your question on the Epson R320 / Mediastreet products. What I do know is that lany here print very
Re: Novice posterization headaches
2006-09-22 by rmsinct2
Thanks, Roy. This worked perfectly. I was surprised that the spot where I had to poke the hole was covered by both a thin plastic film and by a piece of
Re: [QuadtoneRIP] Random Questions.
2006-09-22 by CorrPro96@aol.com
In a message dated 9/21/2006 7:43:15 P.M. Eastern Daylight Time, mrzoner@yahoo.com writes: Next question, what is the prefered method of digitizing B&W 4x5
Re: [QuadtoneRIP] Random Questions.
2006-09-22 by CorrPro96@aol.com
In a message dated 9/21/2006 7:43:15 P.M. Eastern Daylight Time, mrzoner@yahoo.com writes: I am new to printing with an Epson and I am very pleased with my
Re: Blurry test print from 7600
2006-09-22 by dlruckus
The towel under the head cleaning described is fine. To clean Inside the head, you can actualy print rather than do a transport flush as described. Using a
Basic Question
2006-09-22 by toliwel@aol.com
Hi, I am attempting to make my first QTR curve and have a question. I understand how to compare a lighter ink s 100% value to the next darker ink to find the
Random Questions.
2006-09-21 by Jeff White
I am new to printing with an Epson and I am very pleased with my first attempts. Here are some random questions that I have. I am using a 1280 with UT-2 inks.