Re: [emax] Re: Emax II problems booting disk
2003-09-13 by capricorn
i have emaxII disks with the OS on them but not sure of what version, i d be glad to make you a copy and send it to you. ... From: Jarremix To:
Messages
Browse messages
Page 208 of 236 · 11758 messages matched
Re: [emax] Re: Emax II problems booting disk
2003-09-12 by Skip Spoula
If you have an older PC, a blank 800k floppy, and about a half hour you can create an EmaxII boot floppy by going to the files section and down load the files
Re: [emax] Re: Emax II problems booting disk
2003-09-11 by capricorn
i also recently purchased an emaxII 8 meg turbo HD rack on ebay ... listed as perfect but was much less than .. it was from puerto rico and wasn t well taken
Re: Emax II problems booting disk
2003-09-11 by Jarremix
Ok I dont have any EMAX II OS floppy disks. I have a bunch of Emax I disks so that could be a problem first of all. I tried the format with EMX program with
RE: [emax] Emax II problems booting disk
2003-09-10 by Rob Keeble
Hi, 1) Do you have an Emax II diskette, or does Emax Disks mean Emax I? You ll never boot an Emax II from an Emax I diskette - wrong OS. 2) Check the
Re: Emax II problems booting disk
2003-09-10 by Jarremix
Thanks to those who have responded already. I usually dont post in here cause the information is always so good in the archives . I would answer questions but
Re: Emax II problems booting disk
2003-09-10 by brian_ronn
Hi Gordon Are you sure that your floppydrive is original? Both my Emax I and Emax II (keyboard versions) floppy drives are illuminated with a red light from
Re: [emax] Emax II problems booting disk
2003-09-10 by Gordon JC Pearce
... Not on mine, it s not. Mine lights when the drive is being accessed only. If the LED is on all the time, it could mean that the drive is faulty, or that
Re: [emax] Emax II problems booting disk
2003-09-10 by Brian Ronn
Hi Jarremix I also got the interest of Emax s because of DM. It seems like you have had some bad luck buying this Emax II which apparently have been used for
Emax II problems booting disk
2003-09-10 by Jarremix
Ok looking for help on here... I received a EMAX II in pretty bad condition, I have wanted one scince I saw Depeche Mode using them. I opened and cleaned unit.
Re: [emax] Wave >> Emax
2003-09-08 by Matt Ferrari
... From: Azevedo To: Sent: Saturday, September 06, 2003 2:34 PM Subject: [emax] Wave Emax ... Welcome to the
Re: [emax] Re: new to grp
2003-09-08 by Matt Ferrari
... From: plaztikjezuz To: Sent: Sunday, September 07, 2003 1:32 AM Subject: [emax] Re: new to grp ...
Re: new to grp
2003-09-07 by plaztikjezuz
just wanted to add this. was thinking and maybe the program never worked because i used it in the dos shell window? and the machine i have is the se model w/o
new to grp
2003-09-07 by plaztikjezuz
hello, new to the grp, i have a emax se, had it for a couple of years. i used to use it a lot but it few tot he wayside when i got a laptop. well now i have
Wave >> Emax
2003-09-06 by Azevedo
Greetings I m new on this group and I have a EMAXII, I would like to know if there is any way to put wave sounds on the emax or any other way to transfer
Re: [emax] EMAX II Turbo for auction
2003-09-06 by capricorn
i have the same 8meg rack mount turbo HD i ll sell right now $300 wmewood@owc.net ... From: David L. Vessell To: emax@yahoogroups.com Sent: Friday, September
Oops, eBay link for auction
2003-09-05 by David L. Vessell
Hello, Whoops, forgot to include the link. It s http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&category=38070&item=2555384317
EMAX II Turbo for auction
2003-09-05 by David L. Vessell
I am selling my EMAX II Turbo on eBay. It is the rackmount version, stereo model with 8 MB of RAM and it has a 500 MB hard drive installed in it with about 75
Need chips to upgrade to SCSI
2003-09-04 by jdowning_wood
Anyone have a NCR/5380 SCSI chip and IP355 chip or a dead Emax HD model they will part? I have a Rev 3 board Emax with the IP379 PAL, but need these two chips
RE: [emax] Re: emax operating system
2003-09-02 by tom vx
I can send you a disk- drop me an email... tom(at)vxmusic(dot)com ... From: joe hedges [mailto:joebarney123@yahoo.com] Sent: Tuesday, September 02, 2003 4:55
RE: [emax] emax HD upgrade to SE?
2003-09-02 by Rob Keeble
Hi, The Emax SE upgrade is a one time upgrade diskette, that is difficult to copy and will only work once. No one has yet cloned a copy of the upgrade prior to
Re: [emax] Re: emax operating system
2003-09-02 by joe hedges
Thanks for the reply, I have zero disks for the Emax, no sample disk, no operating system disk. I don t even know the disk size. Is it 360K? Also, I have no
Re: emax operating system
2003-09-02 by Niklas Olsson
Any disk with E-max sample on work as an software disk, since the software is on each disk. If you have an E-max SE and load a disk, which is formatted in an
emax operating system
2003-09-02 by joebarney123
I have an old EMAX that powers up and asks me to insert a disk. EMU systems no longer supports this product and suggested that I check here. Would anyone be
emax HD upgrade to SE?
2003-09-02 by a7634
I ve been trying to upgrade a 1.1 HD emax to an SE model, however I cannot get OS plus to work, and am wondering where this elusive SE upgrade disk can be
RE: [emax] Emax with SDII and Emax factory disks
2003-08-30 by Brian Ronn
SD II is short for Sound designer II developed by Digidesign in the 80 s and 90 s. It s purpose is to transfer samples back and forth between a sampler and a
RE: [emax] Emax with SDII and Emax factory disks
2003-08-30 by Bruce Buell
Hi What is a SDII? 7100/75? Thanks ... From: Nicholasfaith@aol.com [mailto:Nicholasfaith@aol.com] Sent: Saturday, August 30, 2003 12:05 AM To:
RE: [emax] Emax with SDII and Emax factory disks
2003-08-30 by Rob Keeble
Hi, SD II sampler suppport was dropped after V2.5, mainly because they would have to rework the code for more recent Macs and Mac MIDI interfaces.. SD II uses
Emax with SDII and Emax factory disks
2003-08-30 by Nicholasfaith@...
Kevin, The 8100 should work fine with SDII and the Emax.. it was like 2.3 or 2.5 that dropped sampler support I believe, anyone know which version it was? I m
Re: [emax] bizarre Emax I problem...
2003-08-30 by capricorn
i have the same problem with an emax turbo .. it seems i can load an emax disk or emax II disk ... but not one to the other .. unless i shut it off and then
Disk drive compatibility
2003-08-29 by Gérard Mittaux-Biron
Bonjour la liste ! Did anyone have a chance in using a quantum fireball (FB54S011) 540 Mb disk with the Emax II ? I found two of them in my garage, I could
RE: [emax] bizarre Emax I problem...
2003-08-28 by Rob Keeble
Hi, Your Emax might have lost a setting in the EEPROM, which controls software release compatibility (e.g. refusing to load an SE OS when its not been
Re: [emax] bizarre Emax I problem...
2003-08-28 by S. Glitsos
I just cleaned it.... no go. Everything s the same. Gaaaah. Did I go wrong falling in love with an Emax? Anyone? Help me? stavros
Re: [emax] SCSI cd-rom drives for emu products
2003-08-28 by Matt Ferrari
the group owner has a list on his site for the emax II, I have no idea whether they will work for other emu products.
Re: [emax] bizarre Emax I problem...
2003-08-28 by Bob Conner
I d try the cleaning disk if I were you. Bob ... __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design
Re: [emax] bizarre Emax I problem...
2003-08-28 by S. Glitsos
Well, it loads the factory disks just fine, every bit perfectly (yes, I ve gone through every single preset on the disks...). It s just when I format a disk..
Re: [emax] bizarre Emax I problem...
2003-08-28 by Bob Conner
Sounds like the Emax is not reading the disks properly. Have you tried cleaning your floppy disk drive with a cleaning disk? Are you putting these floppies in
RE: [emax] emax 1 se factory cd's?
2003-08-28 by Rob Keeble
Hi, I have transfered the 2 OMI Emax CD s to ZIP100 carts, but its very unlikely anyone will transfer these 504 sample banks to SD II, as that would mean
emax 1 se factory cd's?
2003-08-28 by Kevin Kelley
I was told that there were all of the factory banks available for the emulator II on cd format to use with SDII. Does anything like this exist for the emax 1?
bizarre Emax I problem...
2003-08-28 by sglitsos
(sorry if this double or triple posts, my posting doesn t seem to be working...) Okay, my Emax has developed a really, really weird problem: If I try and load
bizarre Emax I problem...
2003-08-28 by S. Glitsos
Okay, my Emax has developed a really, really weird problem: If I try and load a disk that I format, the Emax flashes Different Software Rev -- even though
Re: SCSI cd-rom drives for emu products
2003-08-28 by Niklas Olsson
Try to get an old Mac scis dirve, most of them works with E-max 2 cheers/ niklas ... emu
emax os
2003-08-27 by cbutera23
Would anyone be willing to send me an emax se formatted 100mb zip disk? I would be willing to pay for it. I have 2 emax s w/ broken floppy drives, and hd s and
Emax II Upgrade
2003-08-26 by capricorn
i have several emaxII racks that are in various stages of memory that i would either like to up grade or to sell.... - my original $3,000 new - 1M rack oddly
SCSI cd-rom drives for emu products
2003-08-26 by capricorn
is there a list some where of what non caddy type SCSI cd-rom drives, that will work with emu products? i bought a cd-rom drive on ebay ( the caddy type
RE: [emax] Digest Number 448
2003-08-21 by John Silveria
I use to use Sound Forge and my Emax SE HD all the time, I still use it with my Emax II. If I remember right the only real problem I had was the sample rates.
Re: [emax] Digest Number 449
2003-08-21 by Nicholasfaith@...
I could never get the emax to accept SDS it would always get errors.. but I love the way the Emax s A/D converters handle audio so I let it go. In a message
RE: [emax] Digest Number 448
2003-08-20 by Rob Keeble
Hi, The Emax samples are linear 12-bit, so Soundforge and Awave would need to support this to work, and they ll need to be able to dialogue with the Emax
Re: Old Alchemy or Sound Designer? Anyone have a copy?
2003-08-20 by homershines
Yeah. I have a copy of Alchemy. It was/is an amazing program. I am still shocked that it hasn t been scooped up by someone as a structure to build a new sample
Re: [emax] Digest Number 448
2003-08-20 by John Silveria
It s simply not possible at this time. Perhaps Translator will be able to do it when it s Emax module is complete, but currently the importing of Emax samples