Yahoo Groups archive
Messages
Page 214 of 283 · 14139 messages matched
2003-02-20 by underneathheaven <realvast@swbell.net>
Yeah let me see a pic of it so i can get some ideas! I was also thinking about a cymbal stacker but wasn t sure. I think I might wanna try that! But I want
2003-02-20 by brown8700 <brown8700@aol.com>
The decay is normally set at +40. Try taking it to 0. I found that suggestion here in this forum and found it really fattens up the hats. Stephen
2003-02-20 by dopmi <mapod@wanadoo.fr>
Hi , rather then use Yamaha pad i use now my acoustic drum with Mesh Head and Ddrum trigger , i don t have a good result for now : after some change on Gain
2003-02-20 by Vernon Graner
... Sarcasm aside, I have found that if you do all your regular surfing with Mozilla (http://www.mozilla.org), you do not have to deal with popups/pop-unders.
2003-02-20 by Vernon Graner
Quick and dirty double-kick trick: Make the hi-hat pedal close sound as a kick and then set the default hi-hat sound to a closed hat w/a velocity cross-fade so
2003-02-20 by Vernon Graner
I visited your site and it looks pretty neat, however, the pop-ups and pop-unders make the site much less attractive, bordering on unusable. On the other hand,
2003-02-20 by Ratzo
... Have you lengthened the decay settiings on the stick sounds yet? That s pretty much a necessity. ____________________________ Jim
2003-02-20 by Ratzo
... I don t think you have enough pop-ups on it yet. Add a few more. ____________________________ Jim
2003-02-20 by abhyankaranand <anand@fastmail.fm>
Hi, I have a DTXpress II set and want to expand it to have double bass. Any recommendations for a non-expensive double bass pedals. Also, I was toying with the
2003-02-20 by daveybrothers <robin@daveybrothers.co.uk>
Can anyone help me with how to get better hi hat sounds out of the DTXpress 2. I have tried mixing sounds but they always sound thin and electronic any help
2003-02-20 by leffelejon <gadda@kth.se>
Thanks Ed I have tried the cymbal with different settings but i didnt really get it like i wanted it so i returned it and will go for a pcy65 instead and put a
2003-02-20 by Walt
Hi UNH, It is (roughly) about 9 inches in diameter, and as far as what sound it produces - it can be anthing you want. I suspect it could be mounted above any
2003-02-20 by underneathheaven <realvast@swbell.net>
I was wondering if anyone has mounted that little bell pad and just used it as a splash? Is it possible or even a good idea? I ve never seen how big the
2003-02-20 by underneathheaven <realvast@swbell.net>
Man I was all excited to check out the prices, then a mammoth pop up ad covered up all the products! Only 8 vistors, must have been all of us!
2003-02-20 by Creighton Higgins
yeah- my pop-up-stopper went nuts. Prices aren t that great near as I can tell. Maybe if the forum gets active there will be some value. ... From: Walt
2003-02-20 by Walt
Thanks, but after visiting your site and being deluged with several pop-ups, I think I will keep using this DTXpress Yahoo group, instead of a commercial
2003-02-20 by brown8700 <brown8700@aol.com>
wonderful. thanks!
2003-02-20 by dtxpress2003 <ebaysales@ureach.com>
http://dtxpress.iwarp.com
2003-02-20 by sgbarter <sgbarter@yahoo.com>
First off I got my extra cymbal pad, so thanks to those who explained what I needed. I got a PCY65S. Moved the PCY65 to the 9/10 input, then installed the new
2003-02-20 by Ratzo
... Once you hit the trigger button once, you can scroll through all of the options with the page up/down buttons. This works for all of the function buttons.
2003-02-20 by darren
firstly, thanks to everyone who has taken the time to answer a reluctant critic like me. Secondly, I wonder whether someone would be kind enough to do me a
2003-02-20 by ankoanko2003 <adehoop@biddle.nl>
Hi everybody, I just bought a second hand dtxpress 1. Now I have a bit of a problem with the trigger button: in the manual it says you have to press it twice
2003-02-20 by brown8700 <brown8700@aol.com>
Darren: Ed, Vernon and UTH have passed along some good thoughts. Like Ed, I have been playing drums for more than thirty years, and I ll pass along this piece
2003-02-20 by Vernon Graner
Darren: Next time, do a Factory Reset on the brain before you test. This will insure you haven t gotten some really rotten setup someone have created. Also,
2003-02-19 by underneathheaven <realvast@swbell.net>
Darren I would definately not judge the DTXpress on what you heard or played with at that store. First of all you only saw a small percentage of what the
2003-02-19 by liberatusvirus <liberatusvirus@yahoo.com>
Andreas, My settings for the CY-6 on input 7 are as follows: 1. Pad type is PCY crash ; you could also try misc 2,4, or 6. 2. Gain = 90; Mvel = 30. 3.
2003-02-19 by liberatusvirus <liberatusvirus@yahoo.com>
Darren, I m loitering on the board this morning so I ll tackle this question. First of all, there are a bunch of products that I d never trust as adequately
2003-02-19 by Walt <wgardus@yahoo.com>
Hi Everyone, I was asked to see if I could help a church find a replacement DTX V2 module, as their s has (seemingly) experienced a terminal failure. If you
2003-02-19 by liberatusvirus <liberatusvirus@yahoo.com>
Andreas, Sometime within the next hour or so, I ll post my settings for the CY-6. Try them and see if they make it easier for you to trigger the cymbal. Ed ...
2003-02-19 by leffelejon <gadda@kth.se>
hi ed i have gotten the edge of the cymbal to trigger now... but only if i grab it with my hand... but still no sound no matter what voice i choose. and if i
2003-02-19 by darren
hello everyone, you may remember last week i posted with some questions regarding the dtexpress which concerned me (thanks to everyone who replied!) which was
2003-02-19 by liberatusvirus <liberatusvirus@yahoo.com>
Hi Andreas, I ve had a CY-6 for almost a year. It s a stereo cymbal (rim and bow). As such, it will not work in 9/10 either via stereo cable or a TRS splitter.
2003-02-19 by leffelejon <gadda@kth.se>
Hi i just borrowed a roland cy-6 from the local music store http://www.rolandus.com/products/details.asp? catid=5&subcatid=23&prodid=CY%2D6 and i cant get it
2003-02-19 by liberatusvirus <liberatusvirus@yahoo.com>
Hi Sam, The Voice menu has a page that allows you select channel for each pad--1-7 Channel, Gate Time. It s right after the note number page. Ed ... channel
2003-02-19 by tfkienle <tfkienle@yahoo.com>
hell yeah, especially if you layer 2 sounds. put a heavy kick on layer 1, then one of those sub sounds (found in the electronic kick category) on layer 2.
2003-02-19 by sslundberg <samlundberg@attbi.com>
I am wondering if there is a way to assign a different midi channel for each pad so that I can record each pad/sound on a different track in Sonar? If so, can
2003-02-18 by jadeiebooshkie
Unfortunately, he was at home when he called me, and he needed to see the manuel (which was at the factory)..he s going to look at the manuel tomorrow, and
2003-02-18 by liberatusvirus <liberatusvirus@yahoo.com>
Sometimes the inputs are locked out individually; that s why I suggested that you try another one. If switching the visulite to another input does the trick,
2003-02-18 by jadeiebooshkie
One of the problems was that MIDI Channel on the KITI was set to 1!!! I called Mario at AM, he ran me thru a few things, but needed to see a manuel before we
2003-02-18 by liberatusvirus <liberatusvirus@yahoo.com>
Let s try this first: Get into midi note auto train and instruct the kiti to show 106 either by tapping pad 9 or manually by pressing the down arrow key. Make
2003-02-18 by jadeiebooshkie
Aha! Ed...ther IS CROSS TALK! It is coming from tom2 that sits under my ride, but the note for tom 2 is 47(B1). For 1 second I was able to get a cymbal
2003-02-18 by Tony Reynolds <treynolds@teague.com>
Thanks for the responses. I looked at many of the links that Ratzo posted and I hadn t thought of Peavy as far as keyboard amps. A one-piece unit that would
2003-02-18 by jadeiebooshkie
I checked every note for the entire kit, and 113 is NOT assigned to anything..the other pad connected to the 9/10 is the cymbal bell pad-that s on 10, and my
2003-02-18 by Walt
Hi Anko de Hoop, The xpress does have a dual zone inout, it is the inlut labeled 9/10. The RHP12SD is a dual zone pad, and by using a stereo (TRS) cable, you
2003-02-18 by liberatusvirus <liberatusvirus@yahoo.com>
Are you by any chance hitting the pad on input 10 instead of input 9? Or is there conceivably enough crosstalk when you hit 9 that another pad s note number is
2003-02-18 by brown8700 <brown8700@aol.com>
Tony: I don t have the Rogue Roller, but I do have a very similar set up. I have a small Kustom PA ($179 from MF). It is a 80 watt system with two 10 woofers.
2003-02-18 by ankoanko2003 <adehoop@biddle.nl>
Hi everybody, I just bought a second hand Yamaha DTXpress kit (version 1). Now I m reading the article about dual zone and stereo pads, and it says that the
2003-02-18 by Walt
No problem, I just didn t want to leave you hanging. Let me know if you need me! Walt ... __________________________________________________ Do you Yahoo!?
2003-02-18 by underneathheaven <realvast@swbell.net>
Hey Walt! Sorry I havent posted anything yet but when the week comes I get busy and can barely even play my drums! I ll out what you suggested within the
2003-02-18 by Ratzo
... http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2508328645&category=10171 http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2508475140&category=1288