Re: HP7960/7660 Printers for B/W ?
2004-01-15 by Paul
... Having read Mike Johnston s article I promptly went out and bought a HP 7660 (cheaper version of 7960) and have to say it was a great buy as the quality of
Messages
Browse messages
Page 1380 of 2186 · 109257 messages matched
Re: [Digital BW] QTR linearization using i1 Match 2.0? (Was: New icc based Soft-proof...)
2004-01-15 by Carl Schofield
I guess it could be done, but i1Match outputs spectral data and the math (at least to me) is a bit more involved for extracting density. The equations and a
Re: OT: Quality Paper Cutter...
2004-01-15 by grdglass@aol.com
Peel off the label and tighten the screws. Replace label. Helene I just bought a 15 Rotatrim from B&H and am having problems with some of my photos
Re: Atkinson for B&W
2004-01-15 by J Michael Sullivan
my experience with both EEM and ESM is that the Atkinson profiles exhibit classic metemerism, even though they are pretty darn good otherwise. Hence the need
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-15 by Steve Kale
Guys this stuff is really exciting! It drives right back to the points I was grappling with a while ago, namely that if one can read a step wedge of QTR
Re: 1160 Clogs while printing and oversprays after dark areas
2004-01-15 by nevnevsf
Are you using a CFS system? I ve struggled with similar problems using other MIS systems, and have discovered that doing the following seems to fix the
RE: [Digital BW] UT-2 inkset for wide format?
2004-01-15 by Paul Roark
... Photoshop image adjustment curves are used to control the inks. The basic workflow is to edit in grayscale, save that file, then convert the image to RGB,
QTR linearization using i1 Match 2.0? (Was: New icc based Soft-proof...)
2004-01-15 by zhi-da zhong
Roy & Carl, Thanks for the outstanding work! Now that you ve figured out how to make i1 Match 2.0 read the gray strips, I m wondering if we can use it for
Re: OT: Quality Paper Cutter...
2004-01-15 by tronicart
I just bought a 15 Rotatrim from B&H and am having problems with some of my photos slipping under the stopping metal ruler (what you push the paper up
Re: [Digital BW] Wax coat for glassless framing - Renaissance - crosspost
2004-01-15 by Alan Zinn
Tom, Were you able to get the lap marks out using wax? Try as I might they wouldn t completely go away for me. It would be a pain to wax large prints. BTW pig
Re: [Digital BW] Coating Prints, was New icc based Soft-proof profiles for QTR
2004-01-15 by Joe Davajon
snip: Roy wrote: No, sorry, it was somebody else. I think Paul Roark and some others were doing this. I followed a lot of the discussion but couldn t see
Atkinson for B&W
2004-01-15 by claudej1@aol.com
In a message dated 1/14/2004 6:36:30 PM Pacific Standard Time, DigitalBlackandWhiteThePrint@yahoogroups.com writes: Quick question: Is anyone on the list
Re: epson black ink cart question
2004-01-15 by bwinkjet
Lea, Go to maintainance in the print driver and under printer and option information, highlight the matt black and all should then be well. Paul ... switched
Ink and Ink usage for Epson 2200
2004-01-15 by Allen Birnbach
I m looking at purchasing an Epson 2200, and have a couple of questions. First, how many 8x10 prints could I normally expect from a set of cartridges. Or is
epson black ink cart question
2004-01-15 by lea
Yesterday I had the photo black cart in my Epson 2200, today I switched to the matt black but the printer never recognized it....kept telling me I had the
roark workflow vs clayton jones wrokflow
2004-01-15 by jerdiakiw
can anyone explain simply the difference between these two workflows for black only printing on an epson 2200 printer? Jerry
Re: [Digital BW] Wax coat for glassless framing - Renaissance - crosspost
2004-01-15 by Tom Andrews
Hi Alan, I m not sure what a lap mark is. With a little gentle buffing with a cotton cloth immediately after applying a very thin coat of wax, I get a very
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-15 by Roy Harrington
Hi All, I ve done a short write up with all the needed files and information. Download from here. http://harrington.com/SoftProofing.sit I ve done this on a
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-15 by Carl Schofield
Roy & Tyler, The converted ref file seems to be working very well Roy. I also converted the 51 step file to RGB (used ColorLab to do it - just open special
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-15 by Tyler Boley
... wrote: snip... ... send you ... Only if you already have it Roy, don t go to any work. Sounds like they are easy to make. Tyler
1160 Clogs while printing and oversprays after dark areas
2004-01-15 by bobphoto
I use MIS VM inks and have been successful until now. I have cleaned several times, used fantastic soak and run a lint free paper towel under the head. When
Re: New icc based Soft-proof profiles for QTR
2004-01-15 by Sören Lindqvist
Thanks Roy Would be nice to be able to download thoose files you mentioned (the larger one as well 51 patch target) any adress? I m using PC, so QuadTone is
Unsubscribe
2004-01-15 by Albert Lim
__________________________________ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus
Re: Cone vs. MIS ????
2004-01-14 by Bill Schwab
Thanks Joe, I appreciate your help. After reading your experience and that of the thread started just before my post ( MIS UT Inks Great!), I ve decided to
Re: New icc based Soft-proof profiles for QTR
2004-01-14 by Roy Harrington
Sören, I guess I was a little cryptic. In the QuadToneRIP dsitribution there s a folder CurveDesign/Eye-One that contains target tif files and reference
Re: Cone vs. MIS ????
2004-01-14 by Joe
Bill I can only relay my amateuristic attempt at all of this. I had midtones block up, shadows blocking, posterization with the Piezography system that I
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-14 by Roy Harrington
... Yes, everything is based on RGB values presumably because that s what most people use. Under the Eye-Match directory (folder) there are TIFF target files
RE: [Digital BW] HP 7960 re : Still waiting for THE solution?!
2004-01-14 by Ed Mathews
... I love mine, although there are some drawbacks that people on this group might find unacceptable: 1. There is a little metamerism. 2. Ink is very
Any thoughts on Leica Digilux 2 shooting 16 Bit Grayscale?
2004-01-14 by Sören Lindqvist
Curious about Leica Digilux 2 special features shooting in B/W mode with 16 Bit Grayscale. Is this the start of future modes in digital cameras? Or is it only
Re: New icc based Soft-proof profiles for QTR
2004-01-14 by Sören Lindqvist
I got it, your referncefile is renamed to i1 RGB 1.5.txt . What about the step-21-random file? Regards Soren ... take ... been ... Piezo.
Re: [Digital BW] Re: New icc based Soft-proof profiles for QTR
2004-01-14 by Stan Jakubek
Attachments enclosed. Stan ... From: Sören Lindqvist To: DigitalBlackandWhiteThePrint@yahoogroups.com Sent: Wednesday, January 14, 2004 5:31 PM Subject:
Re: New icc based Soft-proof profiles for QTR
2004-01-14 by Sören Lindqvist
Roy I would like to try your suggestion and reference file. Just an update on this thanks. Were do you get this Just use the ordinary step-21-random.tif file
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-14 by Tyler Boley
Roy- Outstanding! This is probably obvious, but I want to doublecheck with you. The values below look like RGB numbers, which suprises me a tad for a profiling
7600 Atkinson profiles
2004-01-14 by sandersm@aol.com
Quick question: Is anyone on the list using the Epson driver with Bill Atkinson s profiles to print B+W photographs on the 7600 or 9600? If so, how would
Re: UT2 Curve Problem
2004-01-14 by Roy Harrington
... Interesting. I ran across the fact that Photoshop CS, writes out .acv files with one small difference. Trying some different versions I ve found that PS
Re: [Digital BW] UT-2 inkset for wide format?
2004-01-14 by chipcarterdc
But does the UT 1 inkset run fine on thesse printers without the use of an RIP or complicated software tweaks? That s what I m trying to get away fromand what
UT2 Curve Problem
2004-01-14 by toliwel@aol.com
I downloaded the UT2 curves today. When I go to load them into the curves box, it tells me the curves are not compatable with my version of Photoshop.
Cone vs. MIS ????
2004-01-14 by Bill Schwab
After having made an order to Inkjetmall for the Piezography BW ICC set, I found the software was backordered. In the meantime I visited MIS and purchased the
Re: Wax coat for glassless framing - Renaissance - crosspost
2004-01-14 by jerdiakiw
... Premium Luster ... is there a way to have a wax finish and glassless framing using epson enhanced matte? jerry
Re: [Digital BW] Coating Prints, was New icc based Soft-proof profiles for QTR
2004-01-14 by Roy Harrington
... Hi Joe, No, sorry, it was somebody else. I think Paul Roark and some others were doing this. I followed a lot of the discussion but couldn t see getting
pixelization and banding...
2004-01-14 by Allan Chen
... I printed a photo yesterday using the UT (1) inks on EEM, and had rather severe banding and what looks like pixelization. The only thing I did kind of
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-14 by Joe Davajon
Roy Harrington, Roy, some months ago, if memory doesn t fail, you were working on resolving how one can best coat prints. I m curious to know if you are still
Re: [Digital BW] MIS UT2 Inks Great! - Goodbye Piezography
2004-01-14 by AWStolzing@aol.com
Good idea. Piezography inks ruined my Epson 3000. Might have done me a favour, though. [Non-text portions of this message have been removed]
Re: [Digital BW] MIS UT2 Inks Great! - Goodbye Piezography
2004-01-14 by Mike Sommers
Glad to hear it. I ordered my UT-2 inks on Jan 6 and am eagerly waiting their arrival. I too found that I needed to add contrast to my images when using the
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-14 by Carl Schofield
Hi Roy, Terrific! That really is a time saver. I also noticed that the ref files were hard wired into i1Match and wouldn t accept anything else. I ll give
Re: [Digital BW] MIS UT2 Inks Great! - Goodbye Piezography
2004-01-14 by hogarth
On Wed, 2004-01-14 at 15:02, Joe wrote: ... Sorry you had such trouble. Since all anyone ever seems to post are problems, I thought I should show the
Re: [Digital BW] New icc based Soft-proof profiles for QTR
2004-01-14 by Roy Harrington
Hi Carl, I see you ve been scratching away at this, too. I ve also been figuring out how to use this. I managed to figure out that the reference files names
Re: [Digital BW] Pushkin Monument in Gera
2004-01-14 by AWStolzing@aol.com
sorry, in case there is need I can send it to your private e-mail address. [Non-text portions of this message have been removed]
Re: [Digital BW] QTR and Making Curves
2004-01-14 by Roy Harrington
Hi Steve, You re right that you ought to come up with the ink limits before deciding on the partitioning values. I m not positive exactly how Carl did his
MIS UT2 Inks Great! - Goodbye Piezography
2004-01-14 by Joe
Just a general note to the forum. I have been struggling with the Piezography system for over a month with terrible results. I had reverted to black only