Yahoo Groups archive
Messages
Page 522 of 2186 · 109257 messages matched
2007-02-09 by Terry Ritz
Walt. . . the EEPROM and Timer IC reset did the trick! You just saved me $400 for a new-used printer. Much appreciated. In case anyone else runs into this,
2007-02-09 by flyflightdeck
I have an Epson 1160 that sat for three years in storage with the old MIS quadtone carts in it.It took a little work to get it running again, but nothing
2007-02-09 by Paul Roark
Yes, that is what I d do. You might also want to print purge patterns until the paper shows that the ink is out of the system. Paul www.PaulRoark.com
2007-02-09 by pierrotsc
So i would need to buy some empty carts and fill it with MIS cleaning fluid. Then i would run a cleaning cycle to flush the ink? Is that correct? Thanks. ... a
2007-02-09 by pierrotsc
I did not see the replies to my first post. If the moderator sees this message and the one before, maybe he could delete them. Thanks. PO
2007-02-09 by pierrotsc
I m moving and i m going to remove the CIS from my 220. The printer may stay in storage for a while. Do i need to clean the heads before i store it to remove
2007-02-08 by James Irelan
... You did? I ve had CISes in three 1160s for years and they work without a problem. Still working even after a year of unuse. I bought a chip resetter from
2007-02-08 by frankg_photo
I use the Epson ultrachrome inkset with matte black on my 2200 for col and black & white. Carts cost a fortune here and I am not keen on a continuous ink
2007-02-08 by Terry Ritz
Thanks Walt. I will give it a shot later today. Terry. ... waste pad counter and the eprom. Try resetting the eprom but I think that you have a fatal error ...
2007-02-08 by wkm@kauaiphotos.biz
I just sent you a screen shot with instructions for resetting the waste pad counter and the eprom. Try resetting the eprom but I think that you have a fatal
2007-02-08 by Fred59
The R340 / MIS UT-R2N installation was a success--mostly. While I ll write this up to put in the Installation thread, I thought I would simply report that it
2007-02-08 by Paul Roark
... The way I set it up at http://home1.gte.net/res09aij/UT-2200-Readme.htm , the system can print on glossy papers with Eboni installed by using the dark gray
2007-02-08 by Geoff Meadowcroft
There doesn t seem to be a driver for the 1160 on my new 20inch iMac Intel Core Duo, so I m thinking of using QTR. Does anyone have any profiles for Piezotone
2007-02-08 by Paul Roark
I use carts full of MIS cleaning fluid when I store a printer. Paul www.PaulRoark.com _____ From:
2007-02-08 by CDTobie@aol.com
... I neglected to mention you should LEAVE THE CARTS IN THE PRINTER during storage... C. David Tobie Product Technology Manager ColorVision Business Unit
2007-02-08 by Nancy Wilson
I checked also, but they do have a refurbished 2400 and a refurbished 1800, if anyone is interested. Nancy
2007-02-08 by CDTobie@aol.com
... Put a standard set of carts in it, and run it a bit, so that there is ink in the lines and heads. C. David Tobie Product Technology Manager ColorVision
2007-02-08 by Un Globe Trotteur
We re moving and i need some advice to transport my R220. I have a CIS. How do i prevent the head to get clogged? I m going to remove the CIS from the printer
2007-02-08 by scottkathe1
The Epson Store doesn t have any more refurbed 2200s or 220s for that matter. They had them before the holidays and I thought I d treat myself to a 2200 after
2007-02-08 by Nancy Wilson
I am ready to switch to MIS U7 for my 2200. (1) Can I use both Eboni Bk and Pk (and in what position, if so) at the same time, so I can print on both matte
2007-02-08 by Nancy Wilson
Hello Terry, I had the same problem with my 2200 and flashing lights. I ended up taking it in to a local printer repair place. It is not Epson authorized but
2007-02-08 by seanmcclain
Agreed. I tried to delete it as soon as I saw it posted to the message board instead of an email. My apologies. ... the ... Roberts ... for ... refillable
2007-02-08 by Terry Ritz
Well, I managed to get my waste pad couter reset but I still have flashing lights. It appears I have a more serious problem. Perhaps it s time to hit e-bay for
2007-02-08 by Terry Ritz
My 2200 flashes all its LED s red, and will not print. I understand this means the waste pad counter has reached its limit. I ve tried the method where you
2007-02-08 by fisherrcan
Thanks for the quick reply. It was more the extra light black that I was interested in than the glop. Modifying the curves isn t a problem. Not ready to
2007-02-08 by Paul Roark
... UT2 with Glop is sold off this MIS page: http://www.inksupply.com/roarkslab.cfm I m not sure if they ever pre-loaded UT2 carts with a light carbon in the Y
2007-02-07 by Fred59
I agree--or at least snip it out of this thread and put it a links thread, or whatever... Jim
2007-02-07 by Fred59
OK, I ll put an addendum on here as well. INSTALLATION AND SETUP--NEW R340, MIS UT-R2N cartridge inkset with both Eboni and PK cartridges. Completed the MIS
2007-02-07 by fisherrcan
Mr. Roark, I was looking at your information on the UT2 inksets from MIS regarding options with the UT2 set and the Yellow ink position for the Epson 1280. I
2007-02-07 by Mark Savoia
How about this question off line? Do we really want to see all the details of this deal in the making?
2007-02-07 by atodzia@cox.net
Buyer beware. Unless I got a bad package this paper is horrible. It seems more like an Epson Premium Glossy coating (with problems) put on a fiber paper. The
2007-02-07 by steveh0607
Inkpress has joined the parade. Does anyone know how this paper performs?
2007-02-07 by Craig Roberts
I m refocusing (so to speak) my photography efforts so I have for sale: Epson 4990 Photo scanner with all accessories, including an excellent aftermarket
2007-02-07 by Fred59
Thanks to both of you. I m going out this morning to get the supplies to complete the waste ink mod; then I will fire it up. Jim
2007-02-07 by Carl Schofield
I seem to recall that this paper was discontinued a couple of years ago. Carl
2007-02-07 by colingruk
Hi, There is a stockist of this paper in the UK but I can not find it listed on Epson s US or UK sites. Does anyone have any information? Thanks, ColinGRUK
2007-02-07 by Ernst Dinkla
... We have had more Kodak truths in inkjet printing like their fade resistance measuring system that was a fake. Wonder why they didn t go for separate ink
2007-02-07 by gordonzola_177
Hello Jim, I join Tom s experience: Just put your MIS UT-R2 cartridges in, it s no problem. The R340 will just tell you that you re using non-Epson inks and
2007-02-07 by Steven Karafyllakis
Hi All; Once again a rather OT question: Is anyone aware of remote capyure software that works with the new Intel chips and hopefully a Canon 20D? Thanks Steve
2007-02-07 by Tom Baker
Pauls comments were for the R220, not the R200. I ve never used an R200, but paper handling may have been one of the improvements. ********* Philip Schwartz
2007-02-07 by Philip Schwartz
I have two R200s in regular use, and both have the same miserable paper handling. A reasonable conclusion is that the A4 printers are less consistent from unit
2007-02-07 by Brian Smokler
Kodak has announced printers with much less expensive ink and greater volume cartridges than their competition. Kodak s site here
2007-02-07 by Paul Roark
... I had the opposite experience. The 220 handles Premier Art Hot Press 325 rather easily (with a gentle push into the printer); the C88 I have refuses to
2007-02-07 by Philip Schwartz
I have a C86 with UT-FSN, and R200s with both UT-R2 and UT-FSN. Except for a slight difference in image tone, prints made on both printers are virtually
2007-02-07 by Robert Lee
Correct me if I m wrong, but, just for the sake of accuracy, the respective MIS UT inksets for these two printer families use, I believe, 3 shades in 6
2007-02-06 by Tom Baker
While the CXX printers turn out nice results, they are limiting due to the number of inks it handles. The 6 ink setup of the R2xx, etc., give more opportunity
2007-02-06 by Robert Lee
As Jim H. points out, the R340 is still in retail channels. Another alternative still in retail are the C88 and C86 printers, which are supported by a
2007-02-06 by Robert Lee
This has been the topic of several recent threads, and you ll get a lot of information if you slog briefly through the search function here. I ll try to
2007-02-06 by David Keenan
... Probably not... but I knew I had a photo opportunity when I stumbled by building. Fortunately my trusty M3 was loaded with a color film -- a rarity since
2007-02-06 by CDTobie@aol.com
... I have, and its possible, but not very satisfying, due to the limited (and on many media, non-neutral) gamut of the UT7 inks. Most UT7 capable printers can