Re: [Digital BW] Replacement For Epson R220
2007-02-06 by Fred59
FWIW--I just got a NIB R340 through Amazon for $100.00 plus delivery. IIRC, there were other vendors as well. Jim H.
Messages
Browse messages
Page 523 of 2186 · 109257 messages matched
Re: [Digital BW] Replacement For Epson R220
2007-02-06 by Tom Baker
It appears that if you can t get an R220 or R340, your e out of luck for a next for MIS inks. The next as far as Epson is concerned is the R260, for which
Re: Replacement For Epson R220
2007-02-06 by Fred59
I ll know later today about any real issues--but it appears that the R340 is a logical replacement. Do a search here for R340 and you ll get some good
MIS UT7 and PrintFix Pro 2.0
2007-02-06 by steveh0607
Has anyone used PrintFix Pro 2.0 to profile paper with the UT7 inks? If so, how were the results?
Re: Replacement For Epson R220
2007-02-06 by robert49brake
... likely ... find ... Hello, the replacement is the R260 with the Claria inks and the new chips and a system that as yet won t accept third party inks. Try
Replacement For Epson R220
2007-02-06 by lancscott
Does anyone know what the next printer in the Epson lineup will likely replace the R220 as far as use with MIS products? I am trying to find a 220 but am
RE: [Digital BW] UV Glass or not?
2007-02-06 by Eric Neilsen
Richard, I sell prints mounted on a suitable substrate and over matte. Framing is also available but only at the request of the buyer. When I display prints in
RE: [Digital BW] UV Glass or not?
2007-02-05 by Paul Roark
I don t use UV glass. I use acrylic for weight and lack of breaking. To the extent it s relevant, in my fade tests using fluorescent lights, show only about a
Epson 1400 is shipping
2007-02-05 by Philip Schwartz
I saw some at the Calumet in SF and they are available from the Epson web site
UV Glass or not?
2007-02-05 by Richard Smallfield
Hi, I ve always framed exhibition prints with plain glass because of the published test results on fade resistance. But I m now a bit skeptical about Wilhelm s
B&W Business of Art Photography
2007-02-05 by Paul Roark
... Keep it as a thread here relating to B&W and it ll probably do better. If it s B&W photography that is at issue, it seems reasonably on topic. ... Lately
Re: [Digital BW] 7000/K6
2007-02-05 by dlruckus
Jenny, if you are getting nozzle deflections it means either the head is not getting adequately cleaned by the wiper blade and gunk is being left there or
Re: [Digital BW] Epson R265 (R260 in US)
2007-02-05 by Tom Baker
It appears that there are no third party inks available yet for those printers. Tom Baker Chris Aitken wrote: Hi All, I say one of these
Epson R265 (R260 in US)
2007-02-05 by Chris Aitken
Hi All, I say one of these tonight in PC World for £49.99 (about $100 due to the exchange rate). It appears to be the same printer (specs are the same
OT: Business of Art Photography list
2007-02-05 by Richard Smallfield
Hi, sometime ago I started a list called The Business of Art Photography, with the idea of sharing ideas about how to go about turning your passion for
Re: [Digital BW] CS3 beta question
2007-02-05 by Gary Brown
I have CS2 and CS3 on the same computer (same drive) with no problems. Just don t try running them at the same time. Gary ... From: Steven Karafyllakis
Re: [Digital BW] PAW(*) 2007 #6
2007-02-05 by Gary Brown
..Great Colour... did I just wake up in a different universe. Gary ... From: Jayanand Govindaraj To:
Re: [Digital BW] 7000/K6
2007-02-05 by byushooter
I have read the links from Mark and decided that I have a deflected nozzle (black). The advanced nozzle check revelas that the lines in Row B are not evenly
Re: [Digital BW] CS3 beta question
2007-02-05 by T
Installed in separate folders with no problems. Even copied some plug-ins over to the new beta CS3. T Steven Karafyllakis wrote: My
Re: CS3 beta question
2007-02-05 by btvarner
Steve, I am having two minor issues. Running XP with both CS2, CS3, & Lightroom installed in the same partition. #1 Every time I open CS3 I get during loading
Re: [Digital BW] PFP 2.0 with Vista
2007-02-05 by CDTobie@aol.com
... PFP2.0 is not Vista compatable. There is a Vista update available for testing; if you aren t on the PFP beta list, email me at with your
Re: [Digital BW] CS3 beta question
2007-02-05 by Steven Karafyllakis
My thanks to all who responded-sounds like its safe to go in the water (g) Steve Karafyllakis ... along ... behavior? ... unless I ... with
Re: [Digital BW] CS3 beta question
2007-02-05 by Arthur Fink
... I did same computer - different drive (using an external drive). There are some issues with CS3, of course, but CS2 keeps working fine. CS3 is my tool of
Re: [Digital BW] CS3 beta question
2007-02-05 by Alan Kearney
Steve, I ve install CS 3 on my Mac and PC and I LIKE it. My only complaint to date is that it takes OVER. Any image you double click to open will open in CS 3!
Re: CS3 beta question
2007-02-05 by artistsloft4811
... hi Steve, I have CS, CS2 and CS3 running on the same drive, no problems, you can even run 2 and 3 at the same time... that is on Mac with tiger... can t
Re: [Digital BW] CS3 beta question
2007-02-05 by Bert Katzung
Hi Steve: I ve done this with no problems on CS2 operation. I haven t used CS3 as much as I would like so far because they (Adobe) haven t resolved a CS3
CS3 beta question
2007-02-05 by Steven Karafyllakis
Has anyone done a same computer-same drive installation of CS3 along with CS2, and if so, did it produce any issues, bugs, quirky behavior? I d like to get
Re: [Digital BW] 7000/K6
2007-02-05 by Steven Karafyllakis
If you can t find the manual already uploaded (it should be available on the wide format forum) get back to me, I still have a copy of the 7500 manual-I
Re: [Digital BW] PAW(*) 2007 #6
2007-02-05 by Jayanand Govindaraj
Great colour!! Cheers Jayanand ... [Non-text portions of this message have been removed]
PAW(*) 2007 #6
2007-02-05 by David Keenan
Take a look . (*) Picture A Week Dave. -- Web Site: www.david-keenan.com 2007 PAW:
PFP 2.0 with Vista
2007-02-05 by Johnny Eades
Is anyone else unable to run PFP 2.0 under Vista? I tried it in WinXP compatability mode. Your friend in Photography, Johnny
Newbie Question
2007-02-05 by Zabi
Hi all, I have been using OPM with epson inks on an epson 2200, and would like to make the transition to the MIS UT7 or Peizo inksets. The question is which
Re: A couple of questions for Clayton Jones
2007-02-05 by Keith Zimmerman
Thanks Clayton, You answered my questions thoroughly and I have a better understanding of what I am doing. Your interpretations of what I was asking were
Re: [Digital BW] 7000/K6
2007-02-05 by byushooter
Thanks so much for all your help! I ll give all this a shot tomorrow after the printer rests overnight. Jenny ... doesn t like people ... The manual is a bit
Re: A couple of questions for Clayton Jones
2007-02-05 by Clayton Jones
Hello keith, ... Because resampling changes the size of the file. I just want to make a small print from the existing file size. ... I m not sure what you
Re: [Digital BW] Re: 16 new members today???
2007-02-05 by Jayanand Govindaraj
The cooments, if any, are exchanged on the list after the physical exchange for the month is completed based on the prints - though Tom seems to have just
Re: [Digital BW] 7000/K6
2007-02-05 by Mark Stracke
Check out this link regarding finding a manual for your printer.: http://tech.groups.yahoo.com/group/piezobwpro/message/4462 A link on the above page will take
RE: [Digital BW] Re: Epson R340 with MIS UT-R2 Inkset Experiences
2007-02-04 by Paul Roark
... Are you using a 21-step test file? If not, you can download one from here: http://home1.gte.net/res09aij/Test-files.htm ... If you are familiar with
RE: [Digital BW] Just starting - Also
2007-02-04 by Paul Roark
Mark, ... I have not compared the price of the pre-filled carts with the empties. I think the MIS pre-filled carts are also refillable. So, there is some
[Digital BW] Re: Epson R340 with MIS UT-R2 Inkset Experiences
2007-02-04 by Roger
Are you positive the right inks are in the right cartridges? Can you print a 6 ink test pattern (download from inksupply.com) and see if the density of C=M
Re: [Digital BW] 7000/K6
2007-02-04 by byushooter
Eric, I can read the nozzle check and compare it to Jon s notes on the piezo link and can then see what s wrong. But I can t find any documentation to tell me
RE: [Digital BW] 7000/K6
2007-02-04 by Eric Neilsen
I haven t followed the link, but there are a whole bunch of adjustments that can be made on the control panel of the 7000. Reading the nozzle check should get
[Digital BW] Re: Epson R340 with MIS UT-R2 Inkset Experiences
2007-02-04 by p3guru32371
Paul, I have now tried a variety of things, and it seems no matter what i do the flat spot is still there. I stopped using the icc s, and then in the driver, I
[Digital BW] Re: Epson R340 with MIS UT-R2 Inkset Experiences
2007-02-04 by p3guru32371
Ok....i just printed with no icc. And the flat spot, is still there, though a bit less pronounced. Im going to make a guess, that if i reduce one of the
[Digital BW] Re: Epson R340 with MIS UT-R2 Inkset Experiences
2007-02-04 by p3guru32371
Thank you for the reply Paul. Yes, I am using EEM. I have not tried doing it with no ICC. Unfortunately, I have neither a scanner nor a
A couple of questions for Clayton Jones
2007-02-04 by Keith Zimmerman
Clayton, Forgive me for posting this question here, but I could find no other way to contact you to ask these questions. On your sight, in Article 9 about
Re: Just starting - Vista OS
2007-02-04 by Andre Moreau
... But performance is still nowhere near that ... Mark, This may help or not. I would suggest that you search for and download CCleaner from www.cnet.com It s
Print Exchange Forum - new member
2007-02-04 by Alan Berkson
This is a cross post from the Digital BW Print Exchanges forum: I have joined the Digital BW Print Exchange as I saw a posting on the Epson_Scanners list and
Re: [Digital BW] 7000/K6
2007-02-04 by byushooter
Aha, I just ran the advanced nozzle check. It seems I have some problems. In Row 3 the center blocks aren t solid colors where the odd and even lines should
[Digital BW] Re: 16 new members today???
2007-02-04 by Nancy Wilson
Thanks, Jayanand. I did join the group. A further question. I looked but didn t find a way to comment on individual images. Again, did I miss something?