Re: [disklavier] Disklavier volume
2010-03-26 by George F. Litterst
Good morning, everyone. Just to be clear, the volume number on the M4 is not a MIDI velocity number. It is an overall setting. The normal setting is 100. The
Yahoo Groups archive
Messages
Page 107 of 274 · 13692 messages matched
2010-03-26 by George F. Litterst
Good morning, everyone. Just to be clear, the volume number on the M4 is not a MIDI velocity number. It is an overall setting. The normal setting is 100. The
2010-03-26 by athomik
For those contemplating the purchase of a Disklavier, it might also be worth mentioning that developments since the Mark IV came out, mean that the newer
2010-03-26 by Phil Blah
Ron, on the MK4 the Volume control on the PRC is pretty much as discussed below by Carol, they use the word volume control but it s really just a cap to the
2010-03-26 by dfrankjazz
Hello musicfreeks, I d like to invite you to enjoy a GREAT new free online Frank Zappa class on Ustream. Type in Frank Zappa on the ustream home page for
2010-03-25 by Ron Ayanzen
Carol, Thank you for your very detailed explanation. What, then, does the Voulme Control in the upper left corner of the PRC set? I m referring to the
2010-03-25 by Mark in Idaho
I have used a quilt hanging on the wall behind the piano. I can move it up and down to change the amount of the quilt that is behind the piano. Unfortunately,
2010-03-25 by Carol Beigel
It might be helpful to remind Disklavier owners that the volume has different aspects than can be adjusted by the user, no matter what model of Disklavier is
2010-03-25 by Ron Ayanzen
Thank you very much for clearing that up for me. Much appreciated! ron
2010-03-25 by Spencer_Lists
Greetings Ron, MIDI 1 allows multiple tracks whereas MIDI 0 allows only one track. Data in a MIDI file is contained in tracks. Data within a track may be
2010-03-25 by Ron Ayanzen
Robert, What is the difference between MIDI 1 and MIDI 0? ron To: disklavier@yahoogroups.com From: r_leblanc@shaw.ca Date: Wed, 24 Mar 2010 13:16:02 -0600
2010-03-25 by Julien Roche
Roberto, A suggestion from Albania to suppress your piano signal in Acoustic mode on loudspeaker: please check the following. With the PRC go to SETUP then
2010-03-25 by JORGE FERNANDEZ
Some years ago y solved the problem too loud piano installing some Sound Absorbing Foam Since mine is an Upright I ve placed them in the outside back. They
2010-03-25 by Roberto Fasciani
I own a C3 Mark IV Pro since more than two years, I haven t still upgraded to 4.0. But ALWAYS my speakers play piano signal in Acoustic mode. I was
2010-03-25 by athomik
The ability to play back at low volume on a piano player system is limited in part by the mechanical nature of the instrument, where the solenoids have to
2010-03-25 by (no author)
If the solenoids cannot produce a lower minimum volume, that is understandable. But the high end of the volume can still be lowered. That is what I meant by
2010-03-25 by Sam Sheleby
Hey Bill, What is the status of user upgrading the hard drive? Take care, Sam ________________________________ From: Bill Brandom To:
2010-03-25 by Steven Trawford
no it will not ... -- Steve Trawford Piano Distributors 4441 S. Tamiami Tr. (941) 927-2965 strawford@pianodistributors.com www.pianodistributors.com
2010-03-25 by Jeff Kovitz
Much appreciated that you are on top of this kind of thing Bill. From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On Behalf Of Bill Brandom
2010-03-25 by Bill Brandom
Hi Mark, I am contacting our engineers in Japan today to report what you and Julien have reported. Bill Bill Brandom Senior Technical Manager Keyboard Division
2010-03-24 by Kevin Goroway
I was under the impression that the minimum volume is mostly controlled by the sensitivity of the solenoids that activate the keys. If that is the case...no
2010-03-24 by mjburby
I m not sure if this is due to the v4.0 upgrade but I m also experiencing more glitches with the piano since then: 1) Occassionally in quiet mode, the
2010-03-24 by Mark in Idaho
Bill Brandon, Yamaha has made a BIG mistake by not including a better volume control. This is like Toyota continuing to sell cars with accelerator problems.
2010-03-24 by ROBERT LEBLANC
Attached is the DKC850 specs in PDF format along with a related Yamaha press release. Regards, Robert Is there a PDF file with the DKC 850 Technical
2010-03-24 by JORGE FERNANDEZ
Is there a PDF file with the DKC 850 Technical Specifications or Brochure . -- Best Regards ___,,,^..^,,,___
2010-03-24 by Bill Brandom
Playback volume will not change. Bill Brandom lowdebt4me wrote: Does anyone know if the new control unit will allow for a quieter
2010-03-24 by lowdebt4me
Does anyone know if the new control unit will allow for a quieter Disklavier playback than what came with my original Mark III?
2010-03-24 by athomik
I found that (on version 4.0) I get the following: In Quiet Mode, playing the piano, only the headphones produce a sound. In Quiet Mode, playing back
2010-03-24 by Julien Roche
Hi everybody, I just upgraded my Mark IV to version 4 for using my disklavier with iphone. It works perfectly after upgrading also the PRC. Unfortunately now
2010-03-21 by Bill Brandom
sjhart110110 wrote: No more april fools jokes required now that the DK-850 is a reality. I should dig back through all of the threads
2010-03-21 by sjhart110110
No more april fools jokes required now that the DK-850 is a reality. I should dig back through all of the threads were folks told me that this was technically
2010-03-21 by starins@aol.com
Bill - when is Yamaha releasing version 4.0 for the Mark IV? Please advise. Thanks. Bob Jellen ... From: Bill Brandom To:
2010-03-21 by Bill Brandom
If you have a Mark IIXG or Mark III control unit, it can replace the control unit. The DKC-850 does not come with a floppy drive. If you want to connect a USB
2010-03-20 by James Fry
Hello George, From what I understand it depends on the piano. If you have a piano that is earlier than mark IIXG then it likely will connect to your old
2010-03-20 by George Husson
Does the DKC-850 replace the current control unit? I mentioned to my dealer that I would probably want the floppy disk, before I read that any floppy disk
2010-03-20 by Julien Roche
Hi, I upgraded my Mark IV to version 4 but from that now I listen in acoustic mode my piano both in piano but also in the louspeakers... How to remove the
2010-03-19 by George F. Litterst
Good morning, everyone. Kevin is correct: You can use a simple USB device cable to connect a Mark IV to your computer for 2-way MIDI communications. The USB
2010-03-19 by Kevin Goroway
There s more than one USB port on the Mark IV. The main unit, under the piano, has a USB port that works perfectly with a simple USB cable to send/receive
2010-03-19 by athomik
The USB interface can only be used for storage devices (at the moment, at least). To control the keys, you have to use MIDI. For computers without MIDI, you
2010-03-18 by flowline
Can the Disklavier mk4 be controlled note by note with just the usb interface to a computer and not the MIDI or both maybe?
2010-03-18 by uhhmmmmmmmmmm
I just found it: http://launch.groups.yahoo.com/group/disklavier/message/7259 If the action is getting a bit worn or has had some work done to it, you could
2010-03-18 by uhhmmmmmmmmmm
Yes, I would like to know this as well but I could not find it in search. Thank you.
2010-03-18 by Aaron Zornes
I have PG Software s CHILDREN S CLASSICS for DISKLAVIER . PG Software (Vancouver, BC) got out of the Disklavier native business some years ago but I still have
2010-03-17 by Kevin Goroway
Mark, I ve seen the video...It s worth connecting to see at least once...if for no other reason than to witness the complete missed opportunity Yamaha has on
2010-03-17 by Joan
Wow! Thanks for posting this. I wasn t aware of these demo tracks and will check them out when the granddaughters come.
2010-03-17 by mjburby
One of my most favourite features of the demo tracks on the Piano are under the Pianosoft + Graphics list. At the end of the list there are three tracks that
2010-03-17 by whitestarline123
Hi, I am new to the group. I would like to know how I can clean the solenoids and their housings in my disklavier. The solenoids in the middle section of the
2010-03-17 by Phil Becker
Thanks, I missed that response... _____ From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On Behalf Of ROBERT LEBLANC Sent: Tuesday, March
2010-03-17 by ROBERT LEBLANC
Greetings Phil, I believe PianoBench answered your question. Specifically, his response indicates that the DKC850 is intended as a replacement for the DKC500RW
2010-03-17 by ROBERT LEBLANC
Yamaha responded to me question and have advised that the DKC850 has tuning capacity in 1 cent increments, + or – up to 50 cents. This is fantastic news and
2010-03-16 by Phil Becker
I didn t get a response to my first try at this question so I m reposting: Does anyone know for sure if the DKC-850 will work with the Millenium (year 2000)