Re: [emax] how to determine the OS version of my newly bought Emax?
2009-02-20 by Ted Summers
My understanding is that if the Emax is not SE, the SE OS will not boot the unit. Regards, Ted ... [Non-text portions of this message have been removed]
Messages
Browse messages
Page 134 of 236 · 11758 messages matched
how to determine the OS version of my newly bought Emax?
2009-02-20 by bermudaben2006
Hi there, I bought an Emax on Ebay and I am not sure if any of the previous owners upgraded it to SE OS. The guy who sold it to me included a few diskettes,
Re: [emax] Re: dear Emax users:
2009-02-20 by Brooks Mosher
so after more testing with my Emax it doesn t matter if the patch has dual voice or even chorus turned on - no matter what it s only 3 note polyphony. this
Re: [emax] Re: EMAX II Slim Floppy + CF Drive (Thank You Ted!)
2009-02-18 by Ted Summers
Folks- Thanks for your support. I know it can be a concern trusting someone off a forum. Sending cash and all, and I am glad that (so far as I know) I haven t
Re: [emax] Re: EMAX II Slim Floppy + CF Drive (Thank You Ted!)
2009-02-18 by Brooks Mosher
do you install your CF reader in the Emax II rack? if so, does it fit fine in the chassis slot without having to make it wider? i ended up getting a Zip100
Re: EMAX II Slim Floppy + CF Drive (Thank You Ted!)
2009-02-18 by pauldays1
The CF drive is a Startech.com drive, after PC Connection not wanting to use my credit card for purchase (stating I am not one of their customers, and I am), I
Re: [emax] EMAX II Slim Floppy + CF Drive (Thank You Ted!)
2009-02-18 by Julian
so.... what CF drive did you use, and where did you get it? ... thanks, julian On Wed, 18 Feb 2009 01:19 +0000, pauldays1 ... --
EMAX II Slim Floppy + CF Drive (Thank You Ted!)
2009-02-18 by pauldays1
Hello Board, Well after my EMAX IIs Disk Drive failed, I searched in here for solutions, and I must really really give major kudos to Ted Summers, he is a
emax psu
2009-02-12 by jammie.emma
i have found a replacement psu for emax it has much better regulated supplies it is a switch mode psu and works for both 120 and 240 ac you dont need to use
Re: [emax] Emax SCSI kits- 4 left - including the 3 listed on ebay.
2009-02-12 by JMoore6397@...
Ted, I have an emax se and would like to get one of your kits. My phone number 610-636-5619. I live outside of Phila. Pa. Kindest regards, Jimmy Moore I hope
Re: [emax] dear Emax users:
2009-02-11 by Bob Conner
A little early for Valentines. But you can send chocolate. Bob ... From: Chip Subject: [emax] dear Emax users: To: emax@yahoogroups.com Date:
Re: dear Emax users:
2009-02-11 by jammie.emma
... its either the sample and hold chips ssm2300 or the voice ssm ic or its the e-chip if its an e chip you will have to buy a broken emax to scavenge the
Re: dear Emax users:
2009-02-11 by Chip
lol, do you know what is the problem?
Re: [emax] dear Emax users:
2009-02-11 by Brooks Mosher
i ve got an Emax rack with only three voices (polyphony) that work and I still love it. ... B ... [Non-text portions of this message have been removed]
dear Emax users:
2009-02-11 by Chip
I love all of you chip.
Re: Emax 2 Power Supply is this auto switching 110v-240v
2009-02-08 by rascalrevenge
On the back of the Emax is this black round thingy near where you plug the powercord (it has both voltages - printed in white - on it (110 V and 220 V in my
Re: [emax] Re: Emax 2 Power Supply is this auto switching 110v-240v
2009-02-08 by David Bulog
Hi can you kindly tell me how to set manually ________________________________ From: rascalrevenge To: emax@yahoogroups.com Sent:
Re: Emax 2 Power Supply is this auto switching 110v-240v
2009-02-08 by rascalrevenge
You need to set manually.
Re: Am I lucky or what?
2009-02-08 by Rei
I will. We were not able to meet yesterday because we had a riot (thanx to Hugo Chavez) but I am on it. I will let you know.
Re: Am I lucky or what?
2009-02-07 by esynthesist
Lucky You ! Let us know what you have found out there :-) And.. if you really find those RAM upgrade kits, *please* make a floppy disk image of the supplied
Emax 2 Power Supply is this auto switching 110v-240v
2009-02-07 by David
Hi can anyone tell me for sure if the Emax 2 powersupply auto-switchs automatically or do you need to manually set thanks David
Re: New Emax II User
2009-02-07 by kbclifton@...
Hi there, and welcome. Check the site below for some top notch emax info and downloads. http://www.silveriafamily.com/emax/index.html To get the sounds to your
Am I lucky or what?
2009-02-06 by Rei
I was speaking to a friend of the keyboard comunity here in Caracas-Venezuela. He used to fix the keyboards back in the 80 s and early 90 s in one of the best
Re: Boot-up errors
2009-02-06 by crazychris8547
Hello Guys Thank you very much for your advice. I gladly try them out. I will keep you informed ;-) Cheers Chris
Toodles
2009-02-06 by mataloopy
best wishes all. Mataloopy.
Re: Boot-up errors
2009-02-06 by elmbeatz
Plus: I would clean the IC s and connector s pins with Isopropyl alcohol while reseating them. I used an electric toothbrush to do this (on my EII). Be careful
Re: Boot-up errors
2009-02-05 by Donavan
To add to Ted s great advice. I would recommend examining the circuit paths for a burnt/dark coloration. I had this on my keyboard circuit board and was able
Re: [emax] Re: Boot-up errors
2009-02-05 by Ted Summers
I don t have schematics, but reading the diagnostics manual.... from emax 1 diagnostics, the tests are sequential. If emax 2 is the same..... The transpose
Re: Boot-up errors
2009-02-05 by crazychris8547
Nobody knows anything about this boot-up errors? Please, I need some help! Bye Chris
Emax SCSI kits- 4 left - including the 3 listed on ebay.
2009-02-05 by Ted Summers
After that, it might be a little while before they become available again. I can remove the items from ebay if people here want them..... $50 here compared
Re: Emax voice issues
2009-02-04 by jammie.emma
... right there are 4 2300 sample and hold multiplexers they have 8 channels 1 for each voice of polyphony 1 2300 deals with the filter cut off envelope 1 2300
Re: [emax] Re: Emax voice issues
2009-02-03 by Brooks Mosher
Jammie, can you explain more about the smpo8? thanks, Brooks ... [Non-text portions of this message have been removed]
New Emax II User
2009-02-03 by George
Hi Group- I just bought an Emax II. Are there free samples available on the web? How can I transfer the sounds... I own a scsi cd rom drive and a scsi zip
SCSI Upgrade chipset kit
2009-02-03 by Robert Cary
If anyone s interested I found these on eBay: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&Item=290293428896&Category=38070 Rob
Re: [emax] EMU Emax 1 HD SCSI Rack with built in Zip FOR SALE ****
2009-02-03 by Brooks Mosher
is that your Emax up on Ebay? Brooks ... [Non-text portions of this message have been removed]
EMU Emax 1 HD SCSI Rack with built in Zip FOR SALE ****
2009-02-03 by crackinviles
http://cgi.ebay.com/EMU-Emax-HD-Rack-Scsi-w-Zip-similar-to-rack-sp1200_W0QQitemZ290293510881QQcmdZViewItemQQptZKeyboards_MIDI?hash=item290293510881&_trksid=p32
Re: [emax] Re: Emax voice issues
2009-02-03 by Brooks Mosher
Cool, thanks Ted... I might give that a try when I have a free afternoon. Brooks ... [Non-text portions of this message have been removed]
Re: [emax] Re: Emax voice issues
2009-02-03 by Brooks Mosher
Thanks Jammie... BTW, Is the smp08 a replacement for *both* the VCA/VCF IC *and* the sample and hold chip? Is the VCA/VCF and sample/hold all on one IC? I m
Re: [emax] Re: Emax voice issues
2009-02-03 by Ted Summers
Another idea might be if those ICs are socketed on the analog board, to move a working voice to a non-working section and see if that voice now works. That
Re: Emax voice issues
2009-02-03 by jammie.emma
... or the sample and hold chip is playing up these are 2300 ic if it is these upgrade to smpo8 as these are the replacement and have a faster slew rate equals
Re: Send sample from Mac via midi dump with C6 soft
2009-02-03 by jammie.emma
... dumps its about $43 or you can send me the samples you require to be dumped and i can do it then save it as a floppy image no charge jammie
Re: [emax] Emax voice issues
2009-02-03 by Brooks Mosher
okay, i ve confirmed now that i m only getting 3 note polyphony. loaded up my own sample, not a dual voice preset, no chorus, and if i play more than three
Re: [emax] Re: Send sample from Mac via midi dump with C6 soft
2009-02-02 by cruising
Hello Ted, Thanks for your answer. I shall open the Emax1 for the first time (in more than fifteen years) tomorrow. Best regards Poumpoumchak ... [Non-text
Re: [emax] Re: Send sample from Mac via midi dump with C6 soft
2009-02-02 by Ted Summers
If your Emax is SE HD, you do not need an upgrade. To utilize a second external drive you need: Plus OS 1.0 to boot from External adapter / connector for the
Re: [emax] Emax voice issues
2009-02-02 by Brooks Mosher
that could be... but it s like this on all the presets. i had the bank called Synth Factory loaded up and i couldn t get any preset to play 8 voices (seemed
Re: [emax] Emax voice issues
2009-02-02 by Chase Smith
Maybe you have the chorus turned on in the presets. It uses voices. Chase Brooks Mosher wrote: Maybe
Emax voice issues
2009-02-02 by Brooks Mosher
Maybe someone on the list can help me here. So I got a new floppy drive working (thanks Ted) on my Emax and I m *just* now getting around to using EMXP and
Re: [emax] Re: Send sample from Mac via midi dump with C6 soft
2009-02-02 by cruising
Hello Ted, Thanks for your answer. My Emax1 is a SE HD, and already have a hard drive. Would the upgrade permit to have a second one or an extra strorage (Zip
Re: [emax] Re: Send sample from Mac via midi dump with C6 soft
2009-02-02 by Ted Summers
SCSI upgrade has nothing to do with the Mac connectivity that I am aware of. I don t think Emax 1 has SCSI dump. The SCSI upgrade will allow you to: 1) Boot
Re: Send sample from Mac via midi dump with C6 soft
2009-02-02 by esynthesist
If you want some help in finding the problem with the panning, feel free to e-mail me one of those Emax-II banks and I will have a look too. My e-mail address