Yahoo Groups archive
Messages
Page 86 of 168 · 8362 messages matched
2005-10-24 by Thomas De Monaco
Cool Am 24.10.2005 um 23:05 schrieb Colin f: > > > I finally finished the back panel and boxed it all up, just > > in time for > > a J.I.C. gig in London over the weekend (where it and it's three > > brothers performed flawlessly!)... and, as threatened, I > > added a U.V. > > fl
2005-10-24 by Colin f
> I finally finished the back panel and boxed it all up, just > in time for > a J.I.C. gig in London over the weekend (where it and it's three > brothers performed flawlessly!)... and, as threatened, I > added a U.V. > fluorescent tube just to watch it glow in the dark! :-) > Hav
2005-10-24 by regimental1200
Rather than MIDI volume / panning, is it possible to assign other control changes to the knobs while the sequencer is running without affecting the sequence? Would be particularly interested in sending programmable sysex messages. --- In analogue-sequencer@yahoogroups.com, Paul N
2005-10-24 by regimental1200
I own a Doepfer Schaltwerk and MCV24 MIDI-CV/GATE Converter. From personal experience, whether I drive an analogue synth directly from the Schaltwerk or from the MCV24 which is receiving MIDI notes from the Schaltwerk, it does the same job, can't notice jack in terms of latency.
2005-10-24 by philsmillie
> Nice ;-) > But I think a little bit of luminous paint on the insides of the keys might be a cool extra touch... Ooo yes.. a top tip! I'll order some. > And maybe a pair of these... > http://www.theglowcompany.co.uk/acatalog/GLOW_IN_THE_DARK_GLOVES.html > to operate it with ? I'
2005-10-24 by philsmillie
I finally finished the back panel and boxed it all up, just in time for a J.I.C. gig in London over the weekend (where it and it's three brothers performed flawlessly!)... and, as threatened, I added a U.V. fluorescent tube just to watch it glow in the dark! :-) Have posted a pic
2005-10-24 by ferrograph632
...see what I did there? quiet day today, I thought, so.... I've uploaded a snap-ette of the corner of my room. I had to switch it all off first, because it was garish. you can see the important stuff that has to sit in the middle; around the periphery to the left are the two pro
2005-10-23 by ferrograph632
>>Wow. I'm not entirely sure my brain didn't just go into a feedback loop....... I'll send you a new PIC to try. pocket controller> thru box> maq & merger (with maq output)> p3> stuff including mmt8> keys again. so now the mmt8 can capture everything that's going on, all F'd-T-S
2005-10-22 by Colin f
> here's what's going on: the clock-only output of the p3 goes to a > doepfer pocket controller, which does things to the maq & whatever > it's talking to. this goes to a midi through-box, & then to my > oldest, most knackered, but up-to-date software-wise maq. > the maq's output
2005-10-22 by ferrograph632
>>It seems that some of the changing and optimising of code I've done has introduced a few oddities. I've uploaded tonights build, which fixes these.
2005-10-21 by Colin f
> i've just been playing around with the b20 build on my working P3, and > I've noticed a thing about the "sticky keys" user-config option. A > trick I use quite a bit is switching parts while holding both the > 'Func'-key and the 'Mute Hold'-key, which switches to another part >
2005-10-21 by Gert van Santen
Boele Gerkes wrote: > [p3 pron-mode on] > http://www.synthmusic.info/mp3s/volt.avi > [off] Boele, Thanks for posting that clip. Although I had planned to come to e-Live, I couldn't make it. :-( Michael, That must have been a great gig! Cheers, Gert www.waveworld.tv
2005-10-21 by Boele Gerkes
Op 21-okt-2005, om 2:02 heeft Michael Shipway het volgende geschreven: > Meanwhile, congrats to Colin for an excellent machine with rock > solid timing > and reliability, just what we wanted! And thanks you for a great concert! inside joke: Less noise and hum with the lights of o
2005-10-21 by Michael Shipway
Koen Buytaert said: * Just want to say that i saw Volt last Saterday at E-Live in Eindhoven. * They used a P3 but as far as i could see very basic. Yep, the P3 was driving a Supernova for all sequences, plus the midi-clock output was used to drive the occasional arpeggiator on Z1
2005-10-21 by Michael Shipway
Koen Buytaert said: * Just want to say that i saw Volt last Saterday at E-Live in Eindhoven. * They used a P3 but as far as i could see very basic. Yep, the P3 was driving a Supernova for all sequences, plus the midi-clock output was used to drive the occasional arpeggiator on Z1
2005-10-20 by Colin f
> colin- I've got the second-latest build (19) running, & > finally got the > studio rewired to test it just now. > here's the thing. well, two things, but this first is the > biggie for me. It seems that some of the changing and optimising of code I've done has introduced a few
2005-10-20 by ch.³l
hi Colin, i've just been playing around with the b20 build on my working P3, and I've noticed a thing about the "sticky keys" user-config option. A trick I use quite a bit is switching parts while holding both the 'Func'-key and the 'Mute Hold'-key, which switches to another part
2005-10-20 by Colin f
> I am curious if there is a reason that the p3 has 8 tracks > instead of 16. I > realize that there must be a limit but it > seems since their are 16 keys it would be just as easy to have had 16 > tracks. The upper 8 step keys are used for part selection, so the UI would need si
2005-10-20 by hbeaumont hbeaumont
Hi, I am curious if there is a reason that the p3 has 8 tracks instead of 16. I realize that there must be a limit but it seems since their are 16 keys it would be just as easy to have had 16 tracks. I assume each track is a pretty small array of structures storing note, vel, aux
2005-10-20 by ferrograph632
colin- I've got the second-latest build (19) running, & finally got the studio rewired to test it just now. here's the thing. well, two things, but this first is the biggie for me. the 8 tracks are set to midi channels 1 to 8. on these channels, & only on these channels, I can't
2005-10-20 by Koen Buytaert
Hello Just want to say that i saw Volt last Saterday at E-Live in Eindhoven. They used a P3 but as far as i could see very basic. Maybe it would be a good idea to demonstrate the P3 at EM-festivals?
2005-10-20 by Koen Buytaert
Hello Just want to say that i saw Volt last Saterday at E-Live in Eindhoven. They used a P3 but as far as i could see very basic. Maybe it would be a good idea to demonstrate the P3 at EM-festivals?
2005-10-19 by Paul Nagle
ferrograph632 wrote: >not sure how to take this latest development... I've suggested summat >that seems logical to paul. ah. > > :) >welcome back, man. how was the trip? I was just about to ask you if >you were doing anything to y'r repeater &... there it is. > > Lots - if you ge
2005-10-19 by Paul Nagle
Richard Scott wrote: >I stand corrected on the NRPNs - I thought one of the major VAs was using them > > Only Alesis AFAIK >as for, "Alesis thought it was a good idea so perhaps they have a step sequencer lined up that copes with them?" > >that will never happen, I think Alesis j
2005-10-19 by Richard Scott
I stand corrected on the NRPNs - I thought one of the major VAs was using them as for, "Alesis thought it was a good idea so perhaps they have a step sequencer lined up that copes with them?" that will never happen, I think Alesis just miscalculated that NRPN would take off and t
2005-10-19 by ferrograph632
>>I agree. I always init a bank then turn off all tracks so I can enable them as I start to work on them. Seems logical.
2005-10-18 by Paul Nagle
richardscott wrote: >want to try something out. So yes if its possible I'd >request it - I think it could be useful for access virus >users as well? > > The Virus doesn't use NRPNs. It uses MIDI CCs - and for a few rarely used parameters it uses poly aftertouch. These are far eas
2005-10-18 by Paul Nagle
tmoravan wrote: >Lexicon and Eventide (among others) seem to provide fairly extensive >MIDI control over their effects parameters. Take a look through your >effects manuals and have a go at it. > > The Electrix stuff is ace - the Repeater combined with P3 is awesome as you can do
2005-10-18 by Jesper Jensen
>>I did a bank init, & all the tracks in all the parts come up enabled. >>wouldn't it make more sense if they came up in their "off" state? >> >> > >If you find someone else to agree, and no-one to disagree, I can change it. I agree as well :) Jesper.
2005-10-18 by Paul Nagle
Colin f wrote: > >>I did a bank init, & all the tracks in all the parts come up enabled. >>wouldn't it make more sense if they came up in their "off" state? >> >> > >If you find someone else to agree, and no-one to disagree, I can change it. > > > I agree. I always init a bank th
2005-10-18 by Colin f
> So If I need din sync I should order the : > > midi + sync > > option? It's written as 'midi + din sync' on the page I looked at. I'm sure if you drop them a mail, they'll make sure you get the right type. Best regards, Colin Fraser Sequentix Music Systems Ltd http://www.sequen
2005-10-18 by hbeaumont hbeaumont
On 10/18/05, Colin f wrote: > > The units Analogue Haven have are only wired for one or the other. > If you want both, a few extra components would need to be fitted which > will > be supplied on request if you buy one without. > Same goes for existing owners. So If I need din sy
2005-10-18 by Colin f
> So if I order the midi + midi sync option, I'll have : > > four midi outs > 1 dync sync out that also puts out midi sync (no midi notes) The units Analogue Haven have are only wired for one or the other. If you want both, a few extra components would need to be fitted which wil
2005-10-18 by Colin f
> Is it possible to accents program on the p3 the same was as > with a tr909, > ie: > > hit key once = note on > hit key twice = note on + accent > hit key three times = note off That's not implemented on P3. > I am aware that the top row of buttons is by default set to > velocit
2005-10-18 by hbeaumont hbeaumont
> > > The reason the option isn't specified on the Sequentix page is the I've > now > started wiring the SYNC outputs for both MIDI clock and DIN sync at the > same > time. > This works fine with every device I've tested it with other than the > TR808. > The 808 will work fine wi
2005-10-18 by hbeaumont hbeaumont
Thanks everyone for the answer to my last question. I've got another question but I must first admit that I've not read the entire user guides. Is it possible to accents program on the p3 the same was as with a tr909, ie: hit key once = note on hit key twice = note on + accent hi
2005-10-18 by Colin f
> they list two options for the p3: > midi + din sync option > midi + midi sync option > Can anyone explain these? I don't see the same options on the > sequentix orer > page? The reason the option isn't specified on the Sequentix page is the I've now started wiring the SYNC outp
2005-10-18 by bleep
On Tue, 18 Oct 2005, hbeaumont hbeaumont wrote: > they list two options for the p3: > > midi + din sync option > > and > > midi + midi sync option > > Can anyone explain these? I don't see the same options on the sequentix orer > page? production p3's have 4 midi outs plus one sy
2005-10-18 by hbeaumont hbeaumont
At : http://www.analoguehaven.com/sequentix/p3/ they list two options for the p3: midi + din sync option and midi + midi sync option Can anyone explain these? I don't see the same options on the sequentix orer page? Also, anyone got a P3 for sale? I'm getting ready to buy one but
2005-10-18 by Colin f
> I expect it's an issue unique to my band & setup Maybe. Maybe most people don't actually use soft-thru on P3. Aside from auditioning parts you are about the record, I suppose one of the main reasons for using it would be to take advantage of the FTS, so maybe PXPos should apply
2005-10-18 by ferrograph632
>>I would like to do sequences as those as I use to do in th MC - 202 , please Colin!! any clue advanced users? I mean withouth using ties or changes in the 16-32th etc.. I mean -- -- -- -------- -- ,just listen to it..
2005-10-18 by ferrograph632
> presumably this is only the case when a single channel has been > > nominated for all recording? > > It applies all the time. > If you select 'any' as record channel, nothing passes through except in > record mode with mthru on. ah-hah. got you now. >>That would mean not being
2005-10-18 by Hans Greuber
Hi; Ihave just downloaded a top notch minimal session on the mood I´m now into it, HIGHLY recommended just donwnload from the page http://www.paradroid.org/ I would like to do sequences as those as I use to do in th MC -202 , please Colin!! any clue advanced users? I mean without
2005-10-17 by colinfraser_com
Roger wrote: > Using the P3 to control a Roland MC-80(as midi slave), Func+Run works > ok as a Midi Continue BUT on first GBAR it seems to send out a Midi > Start because the MC-80 resets to Bar 1. This only began occuring > after I upgraded from 3.1.06B10 to B18. This is fixed i
2005-10-17 by Colin f
> presumably this is only the case when a single channel has been > nominated for all recording? It applies all the time. If you select 'any' as record channel, nothing passes through except in record mode with mthru on. > >>I've also applied the current PXPos value to notes pass
2005-10-17 by ferrograph632
>>As it stands, if you are not in record mode, and soft-thru is set to pass notes on their original channel (any), notes on the record channel will pass through. In the new build, notes on the record channel are not passed thru unless record is active with record mthru on, as thi
2005-10-17 by Colin f
> Using the P3 to control a Roland MC-80(as midi slave), Func+Run works > ok as a Midi Continue BUT on first GBAR it seems to send out a Midi > Start because the MC-80 resets to Bar 1. This only began occuring > after I upgraded from 3.1.06B10 to B18. > > Is there a work round fo
2005-10-17 by makedosh
Colin, Using the P3 to control a Roland MC-80(as midi slave), Func+Run works ok as a Midi Continue BUT on first GBAR it seems to send out a Midi Start because the MC-80 resets to Bar 1. This only began occuring after I upgraded from 3.1.06B10 to B18. Is there a work round for thi
2005-10-16 by colinfraser_com
Folks, v3.1.006 beta 19 fixes a daft problem with the last build caused by some mis-placed curly brackets. It also adds some 'info' messages to assist new users when pressing modifier keys in play mode. If seasoned users find these annoying, I can add a user conf option to disabl
2005-10-16 by josÿffffe9 mauvais
hi, I've connected the p3 to my remote 25 which control reason 2.5 I use the r25 as a midi interface. Regarding the firmware I will download the latest. I have the 1.03 version. thanks for your help --- Colin f a écrit : --------------------------------- > I've just bought a seco