Re: Have some 2101`s FX return porblems
2018-12-18 by sioux4ever71@...
Hey, I also have the same problem. I was wondering if you got it fixed? Thanks, Sean Bauer
Messages
Browse messages
Page 2 of 45 · 2224 messages matched
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-29 by <tguitar@...>
Thanks very much for the information. I have 3.00 version. I ll give this a try. I ll let you know how I make out. ... ============= If your Bank Up or Bank
Re: [gsp-2101] GSP 2101 + Johnson controller for sale
2017-10-29 by <tguitar@...>
Thanks for the offer. But UI own 3 of them all in excellent condition. It s just the Bank Tuner , peddle on my Foot controller that is giving me trouble. And
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-29 by <tguitar@...>
Thanks for the info Ken. I have a friend who is going to replace that switch for me. I bought like 15 of them back when Digitech still supported the unit. But
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-28 by Ken Rowe
If your controller is failing then this wont help much- but I can tell you that you can get new switches and either find a music repair place or replace them
[gsp-2101] GSP 2101 + Johnson controller for sale
2017-10-28 by Filip Wyrwa
Hello All, I hope that I am not acting against the rules of the group. I got a very good condition GSP2101 with Johnson controller up for sale:
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-28 by Graham Pearson
As a follow-up to my previous message, you ll have to perform the foot switch reassignment steps for each of the banks. In other words, you have to reassign 2
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-28 by Graham Pearson
If your Bank Up or Bank Down foot switches have failed on your Control One, you can configure any of the other Control One foot switches to perform Bank Up or
Re: [gsp-2101] Manually change banks on GSP 2101
2017-10-28 by Ken Rowe
Not sure if this reply gets through but here goes anyway.. So you can change banks by pressing the bank button twice, then select the bank you want, so if you
Manually change banks on GSP 2101
2017-10-28 by tguitar@...
I am having trouble with the Program/bank/Tuner peddle on my Control One Foot Controller.. Does anyone know if it is possible to Manually change banks on the
Delays
2017-05-20 by bardkin@...
I m starting to get used to the delays now. some are pretty cool and all, but there are some things I am having trouble setting up. So, I want to create an
Re: [gsp-2101] Setting up the FC
2017-05-16 by Ken Rowe
Sweet I will try that now.. On 5/16/2017 6:23 AM, Graham Pearson me@grahampearson.com [gsp-2101] ... Sweet I will try that now.. On 5/16/2017 6:23 AM,
Re: [gsp-2101] Setting up the FC
2017-05-16 by Graham Pearson
#1) Your foot pedal s LED display reflects the name of the program currently loaded on your GSP-2101. If you want your pedal to display the names you suggest,
Setting up the FC
2017-05-16 by bardkin@...
Ok, now that my repairs have proven to be working, and now that I can successfully run and use MidiWizard, I m on my next step and need more advice. I have
Re: 2101 overheating
2017-05-12 by bardkin@...
So I ran it last night- from about 9:30 - 12:00 pm and it didn t skip a beat. I was able to get 14 patches made up. They sound good but they are done wrong- I
Re: [gsp-2101] Re: 2101 overheating
2017-05-12 by Ken Rowe
meh..Caps are caps. They look good and all, and when its working I don t hear any noises or anything but that doesn t mean they arent going bad. They can last
Re: 2101 overheating
2017-05-12 by Scott Frye
A faster processor will make more heat. I would have someone look at the power supply filter capacitors. When those age out, they act more like heat
Re: 2101 overheating
2017-05-11 by bardkin@...
ok. Got a tip to replace a voltage regulator. Its supposed to pass 5v but was closer to 7. Found a replacement and soldered it in. (The soldering they used was
Re: [gsp-2101] Re: 2101 overheating
2017-05-11 by Ken Rowe
Actually the first time I cracked it open I changed the battery- got a few of them in April for some other devices I have. I got it booted up for a while last
Re: 2101 overheating
2017-05-11 by saber540ltd@...
How old is the battery? Have you tried changing it? And check all the power supply solder joints and connectors. And when it freezes, check the voltage
Re: [gsp-2101] 2101 overheating
2017-05-11 by Ken Rowe
ok, will do. I ll let you know soon as I order it and swap it out. Thanks!
Re: [gsp-2101] 2101 overheating
2017-05-11 by M M
Still easy to try. Get Outlook for Android ________________________________ From: gsp-2101@yahoogroups.com on
Re: [gsp-2101] 2101 overheating
2017-05-10 by Ken Rowe
My apologies. I did not as stated say I reset it. Well, I have taken it apart to test the actual switches. They all have reflex, but I still have the
Re: [gsp-2101] 2101 overheating
2017-05-10 by M M
I can t find where you said you performed a reset, but I m pretty brain dead these days. Get Outlook for Android
Re: [gsp-2101] 2101 overheating
2017-05-10 by Ken Rowe
yes as stated..
Re: [gsp-2101] 2101 overheating
2017-05-10 by Graham Pearson
I very much doubt a factory reset would solve an overheating problem ... From: M M strategy400@hotmail.com [gsp-2101] To: gsp-2101@yahoogroups.com Sent:
Re: [gsp-2101] 2101 overheating
2017-05-10 by M M
Have you done a reset? Get Outlook for Android ________________________________ From: gsp-2101@yahoogroups.com
2101 overheating
2017-05-10 by bardkin@...
GSP 2101 ver 1.03.02 (pre Artist series) Anyone run into this- I am messing around playing or programming and after about an hour I get stuck on whatever
Re: How to program the 2101.
2017-05-10 by bardkin@...
Hi, new to the group, first post. I have looked back over most of the thread titles but... So I was wondering if it is possible to turn on and off effects in
Re: [gsp-2101] control one freezes and lets GSP2101 restart
2016-11-30 by Alex Whittaker
Hi All I have a few 2101 s for sale. The one with the V chip is stuck in boot mode but I think it s an easy fix. The top one is in mint condition, the bottom
Re: [gsp-2101] control one freezes and lets GSP2101 restart
2016-09-12 by Graham Pearson
The fact that your FC works with your old GSP means that neither your FC nor your MIDI connecting cable is at fault. But it could be that the FC connector on
control one freezes and lets GSP2101 restart
2016-09-12 by kade57de@...
hey group, long story short: my control 1 occasionally freezes and keeps displaying the the digitech fc ver 1.03 . short story long: been playing my GSP2101
Re: Out of Program Mamory message.
2016-09-07 by keenears@...
Wow, I wasn`t even aware there could such a problem. Thanks for warning me, Graham and Terrell! While having a system backup is a must, I`ve found its useful
Re: [gsp-2101] Re: Out of Program Mamory message.
2016-09-05 by Terrell
Thanks Chris, that’s some good advise as well. I’ve had this unit for some years, but I’m just now getting deeper into the nuts and bolts of it. I just
Re: [gsp-2101] Re: Out of Program Mamory message.
2016-09-05 by Chris Sherwood
Great advise, but I would just like to add that if you can store your patches on a computer and sent them back and forth via SysEx dumps, then you don t have
Re: [gsp-2101] Re: Out of Program Mamory message.
2016-09-05 by terrellium
OK GREAT!!! And not a moment to soon as I was JUST about to do a factory reset!!! Thanks so much for the great information. Very helpful and I’ve very glad
Re: Out of Program Mamory message.
2016-09-05 by me@...
Below is a copy of one of MIDIWizard s Help Topics that addresses the Out of Program Memory message. Error Message: Out Of Program Memory If you create a lot
Re: [gsp-2101] Out of Program Mamory message.
2016-09-05 by Graham Pearson
Hello Terrell: Unfortunately, there s no way to add extra Program Memory to a GSP-2101. Even if you install the optional PPC-210 card, this does not add
Out of Program Mamory message.
2016-09-05 by terrell5843@...
Hello group. I’ve recently started using my 2101 again and have been editing some of the patches. It has been working fine and I ve been editing away for the
Re: [gsp-2101] Re: 2101 studio tube processor
2016-08-26 by Graham Pearson
To clarify the details included in saber540ltd: The resistor is a 10 (ten) ohm 5% 1/4 watt carbon film resistor. ... From: saber540ltd@yahoo.com [gsp-2101] To:
Re: 2101 studio tube processor
2016-08-25 by saber540ltd@...
R522 is a 10ohm 5% 1/4Watt. You can get the schematics for the GSP2101 here: http://elektrotanya.com/digitech_gsp2101.zip/download.html
2101 studio tube processor
2016-08-25 by Bruce Creighton
I need to know the color code (value) of the resistor that is directly under the line cord jack on the main circuit board. Its the only one their and its
[gsp-2101] Analog Eq not working
2016-06-23 by Pedro Miguel Viana Ferreira
Hello, The Analog Eq. on my 2101 does change on screen, but no sound changes. Any ideia what I should look for. Best regards, Pedro Hello, The
Re: [gsp-2101] Re: Have some 2101`s FX return porblems
2016-06-23 by Marko Menart
Unfortunately no. The only global parameters are the global EQ and output mode (UTILITY menu) everything else you have to set and save for each
Re: Have some 2101`s FX return porblems
2016-06-22 by Vincenzo.Pallotta@...
Hello, i am also new to the group and to the 2101. maybe it s a stupid question, but did you select summed or no sum in the External FX Loop parameter of
Re: [gsp-2101] Wet/dry mixer question
2016-05-17 by Nick Williams
Hey thanks for that. You were right, I checked the algorithm but missed the fact that it was incorrectly routed! ... Hey thanks for that. You were right, I
Re: Wet/dry mixer question
2016-05-16 by me@...
Now to your questions about the “Wet / Dry Mixer”. You did not provide any clues as to your User Algorithm connections so I used the standard Factory
Re: Wet/dry mixer question
2016-05-16 by me@...
I’m going to answer your question in 2 parts. The first part addresses the functionality of the “External FX Loop.” The second part attempts to address
Wet/dry mixer question
2016-05-15 by nickwilliams@...
Hi All. Need a bit of clarification here. I ve made an algorithm that connects the left input to both outputs, no other effects. I can t understand the
Re: [gsp-2101] MIDIWizard - New Version Announcement
2016-05-12 by keenears@...
It`s nice to see 2101 still have some newer software. Happily our beast have a neat SysEx command set that rules the most of the internals, and using any SysEx