Yahoo Groups archive
Messages
Page 241 of 318 · 15852 messages matched
2007-02-16 by Stephen Billard
As a general rule of thumb, if the output gets spooled, it is a problem for Roy. FYI, I have just tried printing a calibration target on my 2200. It also
2007-02-16 by ch_hasse
Hi Bill, did you find a solution for this problem? I have the same issue with my R2400 and QTR, also in the current Version. Printing from other applications
2007-02-16 by Michael Hill
Jeff - Thanks for the help, but I think I stumbled onto the problem. This morning I removed the Epson colored ink and put the Niagra CIS back in to make
2007-02-16 by Jeff Randall
If the QTR profile worked fine initially as you indicated and now does not work it is very likely not the profile or QTR s problem unless something changed the
2007-02-16 by Michael Hill
Jeff - Correct. I used a canned K7 profile with the R1800-K7 printer model. ... From: Jeff Randall To: QuadtoneRIP@yahoogroups.com Sent: Thursday, February
2007-02-16 by Stephen Billard
Thanks for your report. I have a fix for the scroll bar. The sorting of the file headings requires attention from the party that makes the library I am using.
2007-02-16 by tvalleau
Well, I used the 4800 curves, and it printed the photo I d sent it as a test. Nonetheless, when I choose Calibrate... it refuses to do so. Nothing is printed.
2007-02-16 by stolptse
Hi Tom, That sounds like a Windows trick - but I havn t had a chance to look for it on the Mac today. I m more bluff than buff - that s why I need all this
2007-02-16 by tvalleau
PPC Quad; works with regular drivers just fine, via USB. I had QTR for my 4000, so am familiar with it. Just noticed post about kludging the 4800 drivers and
2007-02-15 by dmdctusa
Not sure if this is for Roy or Steven Today I decieded start my first profile. Following Tom Moore s guidance, I started to print the ink chracterization
2007-02-15 by Tim
Hi Stephen I am on a PC, here are a couple of things I noticed: 1) Selecting an image to print, displaying details, window scrolls left to right, rather than
2007-02-15 by Stephen Billard
No. -Stephen www.sbillard.org/Stephen ... From: QuadtoneRIP@yahoogroups.com [mailto:QuadtoneRIP@yahoogroups.com] On Behalf Of castlerockphotography Sent:
2007-02-15 by Stephen Billard
Should be in your documents & settings folder under Application Data then QuadToneRIP. It is pretty much impossible to have run QTRgui and not have the ini
2007-02-15 by Jeff Randall
OK, To recap, you were getting good prints using the K7 inkset printing through QTR using one of the canned profiles (.quad files) installed with the QTR
2007-02-15 by Michael Hill
Jeff - Thanks for the reply. I took out the K7 inks and put standard epson inks back in to trouble shoot the situation. I know the blues are coming from
2007-02-15 by jlk4410
Kyle, Roy H. responded to my e-mail, informing me that max width for QTR on the R2400 is 128 inches. Upon attempting to print my 120 long document I
2007-02-15 by Zisis Kardianos
... Hi Matt, thank you for your reply. The banding problem was solved after a head clean cycle. I m still curious about it, because I wasn t having the banding
2007-02-15 by Jeff Randall
Not all inking profiles (.quad files the ones used by QTR for actual printing) located in the Quad directory are editable, that is, they don t have
2007-02-15 by Steve and Ann Taylor
Pat, thanks for the info. I was begining to think it was just me. Hopefully some else will join in with a solution. Steve On Wed, 14 Feb 2007 11:51:42 -0800,
2007-02-15 by mdhill60_1960
I posted this message originally under Help!HORRID R1800 printing and since then I ve done a bit more troubleshooting. After changing out all of the software
2007-02-15 by stasunas
I am trying to match the output of two printers, an Epson 2200 with UT7 inks and an Epson 7600 with UC inks. Because of the diffferent inks matching exactly
2007-02-15 by mattchapin2
Hi Zissimos, You should not have to convert the image in Photoshop - I have gotten great results by just saving the image as a tiff file in Photoshop. Other
2007-02-15 by Mark Savoia
Brian, Sorry that came across as a wise ass comment, it was not meant to. Mark
2007-02-15 by wharfwalker
Thanks Stephen, my value is Monitor=0 Regards John
2007-02-15 by Joost Horsten
... Using the duotone process (at least as I know it) in PS in combination with a printer like the 2100/2200 needs a color or tri- tone -low gamut inkset
2007-02-15 by Zisis Kardianos
Hi all, I used Matt s curves and got very good tonality results. I haven t blend the curves yet, just used one at a time at 100%. I would like to ask, since I
2007-02-15 by Zisis Kardianos
I m also very interested in a suggestion to the banding issue, since I m having the same problem. I m using version 2.5.0.1 and Epson R800. Paper Hahnemuehle
2007-02-15 by Tom Moore
Ben You can see any curve (as a graph) by selecting it as one of your 3 curves in QTRqui and then right clicking that curve box and selecting Show Curve Graph.
2007-02-15 by Tom Moore
Thanks. I guess my search did not look there. My options has Monitor=1 Not sure what it means. Tom Moore
2007-02-15 by Brian Ellis
Some of us receive email from more than one group. The bulk of mine come from the Yahoo b&w printing group. I didn t happen to notice that this one came from
2007-02-15 by Tom Husband
Hi Stephen. Monitor=0 for me. Thanks, Tom Husband ... [Non-text portions of this message have been removed]
2007-02-15 by stolptse
... Exactly. If you make, say, a Ziatype (palladium, etc.) print of a Stouffer wedge, the dark steps on the print will be too close together. So the light
2007-02-15 by Maris V. Lidaka Sr.
Search your C: drive - Documents and Settings [username] Application Data QuadToneRIP Maris
2007-02-15 by Maris V. Lidaka Sr.
I have a dual monitor setup as well - WinXP Pro SP2 Monitor=0 QTRGui doesn t straddle my screens (Primary monitor is on the right, secondary to the left of it)
2007-02-15 by Tom Moore
Stephen That s curious. I have the same issue and I don t have a file named QTRgui.ini that I can find using Windows search. Tom Moore
2007-02-15 by Mike Dawson
But I think that is the point of what was being said. QTR uses a different method (pattern?) for laying down the ink on the paper. If your paper is curled at
2007-02-15 by Stephen Billard
Tom & John: Please look in the QTRgui.ini file. In it there should be an item under the Options section named Monitor. What value do you have? -Stephen
2007-02-15 by castlerockphotography
Hello all, I am trying to print borderless with qtr 2.4.3.1 on an Epson R2400. Does QTR support borderless printing? Thanks for you help. Dan.
2007-02-15 by Stephen Billard
I don t think the older versions saved Media Type (or Media Source). These could be added if people think they belong with the preset. Media Type seems to make
2007-02-14 by Jeff Randall
Black boost helps maximize dMax of your black ink. It raises just the black ink limit over the default ink limit up to the black boost value. This is often
2007-02-14 by Tom Moore
David You must be on a Mac. The QTRgui has 1 reference and the User Guide has 6 references to black boost. Basically black boost allows you to run the black
2007-02-14 by Tom Moore
Ben Thanks for the info. I ve never tried to produce a digital negative. If I understand you then, simply inverting the image and printing it using QTR would
2007-02-14 by gustavomaurizio
... CS2, ... nothing. ... head; ... Working fine on a MacBook pro. Is yours intel or PPC? Is the 3800 working with the regular driver? Connected thru USB or
2007-02-14 by gustavomaurizio
... papers ... Either there are very few 3800 out there or no one uses B&W any more... Well, since there seems to be no curves or profiles for the new 3800, I
2007-02-14 by Pat McVicker
Steve, Don t know the answer but just wanted to let you know I m experiencing the same thing. I m running WinXP with Athlon 64. Error msg just started also.
2007-02-14 by vermarec
Hello, I used to profile my old 1290S and the 4 gray shades with very plesant results. I moved to a R1800 to reduce clog issues and increase (if possible) the
2007-02-14 by fogmarco
... inks ... for ... No, any mistake. In my quad2100-ut7 folder I find a curve UT3D- EEnhMatte-Selenium . I had only installed the software so I presume was
2007-02-14 by fredila2
Is it my imagination or... Before I installed the 2.5 version it seems to me that when I saved a Preset that the media type was also saved. Now it does not
2007-02-14 by Michael Tiktinsky
Thanks to one and all for all the information. I hope to be able to use it this afternoon when I finally get a chance to give it a try. Much appreciated.
2007-02-14 by symbolmaker33
I asked the original question. Sorry I didn t specify-- I was asking about curves for QTR. (I know about the Hahnemuhle web site- - they have profiles for