Re:Help! HORRID printing from R1800
2007-02-14 by mdhill60_1960
Jay - I ve cleaned the capping station, and I am sure it is not the problem. I have confirmed that it is related to QTR, because Photoshop prints properly,
Messages
Browse messages
Page 242 of 318 · 15852 messages matched
Printer mystery
2007-02-14 by fredila2
I m sure this has nothing to do with the new QTR version but it started happening just after I installed the new version... I am using an Epson 2200 and
Re: [QuadtoneRIP] Re: curves for Hahnemuhle Photorag
2007-02-14 by Mark Savoia
This IS the group for QTR, right? ... [Non-text portions of this message have been removed]
Re: QTR & UT3D
2007-02-14 by Jeff Randall
Marco: Copy the .qidf files to QuadToneRIP 2100-ut3d directory (or where ever the selenium file is stored). You then will have to open each qidf file in Curve
Re: [QuadtoneRIP] two monitors
2007-02-14 by Tom Husband
Right, I see the same thing. Not a big deal but like John said, it didn t do it before. Tom Husband ... [Non-text portions of this message have been removed]
two monitors
2007-02-14 by wharfwalker
Hi, just a very minor problem to report regarding the recent upgrade. The programe opens in the middle of my two monitor system. Moving the window and closing
Re: [QuadtoneRIP] Re: Printing on roll paper, long landscape
2007-02-14 by Kyle Rhorer
I don t know about CS2, but previous versions of Photoshop have a limit of 10,000-some-odd pixels in either dimension. Could that be your problem? ... From:
Re: [QuadtoneRIP] Re: curves for Hahnemuhle Photorag
2007-02-14 by Brian Ellis
... Not that I know of. Was he asking about QTR? If so I missed that, I just thought he might want to try the profiles from the Hahnemuhle web site. ... From:
Re: Fine Horizontal Banding
2007-02-14 by Joost Horsten
A very fine horizontal banding on my 2100 was one of the reasons I recently switched from 1440 dpi to 2880 dpi. But that banding was all over the print, not
Re: QTR & UT3D
2007-02-14 by Joost Horsten
... I assume you make a mistake here, since as far as I know the UT7 inks do not have a selenium toner. I would expect either a SEPIA curve for UT7 or a
Re: curves for Hahnemuhle Photorag
2007-02-14 by Joost Horsten
... I know there are icc-profiles on the Hahnemuehle website, but do they have B&W QTR curves as well??? ... Check the files location of this group. If that
Re: Fine Horizontal Banding
2007-02-14 by thephilipjon
... ends. perhaps this may be ... Yes, I also thought this may be a cause but I do not have the problem when I use the Epson driver. Anyway I have used many
Using Black Boost
2007-02-14 by david627890
Hello, apologies if this message comes through twice, I attempted to post it yesterday afternoon but there is no sign of it yet! I have just started making QTR
Re: How do I import Excel files into QTR?
2007-02-14 by stolptse
Hi Tom, It s not clear to me either... I m figuring out a workflow to make digital negs. As these have inverted characteristics from a print, the dot gain
Re: Help! HORRID printing from R1800
2007-02-14 by mdhill60_1960
Yes, this is it. Faces & whites are muddy grey and shadows worse. I am hoping for some help.
Re: [QuadtoneRIP] curves for Hahnemuhle Photorag
2007-02-14 by Brian Ellis
Have you tried the curves from the Hahnemuehle web site? ... From: symbolmaker33 To: Sent: Monday,
Re: Fine Horizontal Banding
2007-02-13 by Daniel
philip, this sounds like maybe the paper is curling or lifting up at both ends. perhaps this may be the cause?
RE: [QuadtoneRIP] Re: How do I import Excel files into QTR?
2007-02-13 by Tom Moore
... [...] It s not clear to me what you re doing, but it seems to me that you are trying to do manually what the Curve Creation algorithms in QTR do
Re: Fine Horizontal Banding
2007-02-13 by thephilipjon
... Well I have used both previously, as stated, but the result has always been the same. Although I have, today, changed over to glossy media, PK, I have
EPSON 3800 with UC inks
2007-02-13 by gustavomaurizio
Hi, I tried using the new (MAC) version with my 3800. There are no curves to select from!!! Did I do something wrong? My R800 and R1800 are working just fine.
Epson 3800 UC inks - How to use the Printer driver for MAC?
2007-02-13 by gustavomaurizio
Hi, I ve been using an epson R800 with NK7 inks for a while without a hitch. Now I want to use my 3800 with UC inks, but there are no curves to select from, or
Re: Help! HORRID printing from R1800
2007-02-13 by booboonerd
I m having a similar problem, but with QTR 2.4.3 and XP Pro. My Highlights are all gray, instead of white and the shadows are muddy. I too have run every
Re: Fine Horizontal Banding
2007-02-13 by john dean
For this new version I have not tested changing the resolution, speed, or dithering as I am sure I will only repeat the problem at the cost of ink, paper and
Re: Thanks to Roy - Yes
2007-02-13 by john dean
Thanks Roy, As soon as they get me the inks I do what you say and report back to you. I think it should be easy too. John
Re: [QuadtoneRIP] Re: Thanks to Roy - Yes
2007-02-13 by Roy Harrington
Curves should be very easy for the 10K with K6 inks. But first someone has to have the inks in the printer. I worked with Mark to get the variable dotsizes
Re:Help! HORRID printing from R1800
2007-02-13 by Jay Suchland
The advice I got with similar symptoms was to clean the capping station as per following link: http://www.piezography.com/support/
Re: QTR & UT3D
2007-02-13 by fogmarco
... Joost ... Seperations ... Thank you Joost and Jeff for the information. I just try to install QTR and for the 2100-UT7 I can find one curve for EEM (the
Re: [QuadtoneRIP] Re: Thanks to Roy - Yes
2007-02-13 by Ernst Dinkla
... John, you could use one of the 9000 curves to start with ? Maybe Roy can also tell us what the base is of the driver: I guess a hybrid between the 9000 and
Re: Thanks to Roy - Yes
2007-02-13 by john dean
Mark, You re right. I just downloaded it and there are no curves and there is no curve drop box for the NK6 10K. I don t know if Cone has t made them yet or if
Re: [QuadtoneRIP] Re: Thanks to Roy - Yes
2007-02-13 by Mark Savoia
John, But I do not see any profiles for that setup, or for that fact any profiles, for the 10000, just the install script for the driver. Am I looking in the
Re: Fine Horizontal Banding
2007-02-13 by thephilipjon
I have been testing QTR for sometime now, on and off, and have generally been very pleased with the tonality and quality of the results. Unfortunately there is
Re: [QuadtoneRIP] Re: Installing QTR on a Mac Pro
2007-02-13 by Skip Sorrentino
This may be what you are asking MIke. If you want/need access to the various applications, Then when you expand the dmg file to do the instal, you will have to
21 or 52 or 100 steps for profile
2007-02-13 by john eckenrode
In anybody s experience does a greater number of grey step samples (ie 52 or 100) help during the Profile creation step of QTR. For curve creation using more
Re: Installing QTR on a Mac Pro
2007-02-13 by edrudolpho
... Mike, I think that when you go to print your image from Photoshop, Quadtonerip will show up as one of the printer choices in your printer driver. If you
Re: Installing QTR on a Mac Pro
2007-02-13 by tvalleau
There is no program. QTR is a printer driver. To see it, launch Printer Setup Utility, which is in /applications/utilities. If you installed it, you should be
3800 not printing
2007-02-13 by tvalleau
Hi Running a Quad PPC, 10.4.8. Installed 2.5 for my 3800. Loaded up inseparation.psd into CS2, set up no color management; selected printer; chose calibration;
Epson 2100/2200, MIS UT3D inks, how to profile?
2007-02-13 by Ralf
I just converted my Epson 2100 printer with the UT-3D (with Eboni black) inks. I also own a Gretag Spectrolino spectrophotometer. Does anyone have a
Installing QTR on a Mac Pro
2007-02-13 by mtiktinsky
This may sound very silly, but I just switched from a PC to a Mac Pro. And, of course, I cannot find anything. I downloaded the newest version of QTR and
curves for Hahnemuhle Photorag
2007-02-13 by symbolmaker33
Has anyone created a curve for Hahnemuhle Photo Rag on the epson 2200 that they would be willing to share? In general, is there a sharing of created curves?
Hawk Mountain Condor curves---got any?
2007-02-13 by fredila2
Hi, I m looking for a set of curves for Hawk Mountain Condor. I m using an Epson 2200 with OEM ink. Thanks for pointing me in the right direction. Fred
Re: How do I import Excel files into QTR?
2007-02-13 by stolptse
Terrific. Thanks Tom! I never would have found that for myself. I ll try it in a couple of days when this stomach bug I have lets me think clearly again...
Memory reference error
2007-02-13 by Steve and Ann Taylor
This is a question for Roy or anybody else that might have some info about it. I have downloaded the newest version of QTR and I am trying to keep up with the
Re: Thanks to Roy - Yes
2007-02-13 by john dean
I just saw that the new version of QTR now supports the Epson 10K with the NK6 Piezotone inkset. YES. Thank you sir! You read my mind. I believe these 10K inks
Problems with QTRgui controls not displaying properly
2007-02-12 by Stephen Billard
I have finished talking with the supplier the controls I use in making QTRgui regarding the problems some people have been seeing. The end result is that I
Re: is there any real-world difference between 1440 and 2880?
2007-02-12 by Joost Horsten
... I guess that depends on printer and ink. For my epson 2100 with UT3D I m in the process of switching over to 2880 since I get better Dmax and smoother
Thanks to Roy
2007-02-12 by Mr_Misty_44
I just sent an extra $50.00 to Roy Harrington. I ve been a user since the beginning and felt he diserved a thank you, especially for the latest version. Thanks
RE: [QuadtoneRIP] How do I import Excel files into QTR?
2007-02-12 by Tom Moore
Ben To create a string consisting of 2 numbers separated by a semicolon with no spaces use the Excel Concatenate and Text functions, as in
Help! HORRID printing from R1800
2007-02-12 by mdhill60_1960
I have recently developed a printing problem using QTR that I cannot figure out but it has completely ruined my printing abilities using QTR. I was doing okay
is there any real-world difference between 1440 and 2880?
2007-02-12 by Daniel
i have two questions for everyone. i hope you can help. i ve been test profiling 3 papers with QTR for a couple of weeks using the 2880 instead of the 1440
Re: QTR & UT3D
2007-02-12 by Jeff Randall
Joost: I checked my QTR directory after installing 2.5.0 QTRip installation and your UT3D on EEM profiles were there -- HOWEVER, I *might* have copied them