[Digital BW] Re: B&W prints on the LightJet at ReedPhoto?
2003-03-05 by mh
David Fokos does use lightjet output, but that is on color paper (intentionally, because he likes to tone them slightly). If a lightjet were exposing true B&W
Messages
Browse messages
Page 1636 of 2186 · 109257 messages matched
Re: [Digital BW] Re: B&W prints on the LightJet at ReedPhoto?
2003-03-05 by Mark Savoia
I just read the description on Reed Photo s web site and they must have figured some way around the limits. I will be making some phone calls to the sales
RE: [Digital BW] Re: B&W prints on the LightJet at ReedPhoto?
2003-03-05 by Andy Biggs
It is my understanding that David Fokos uses Calypso Imaging in Santa Clara, CA for all of his B&W prints, which are all done on the LightJet. It is my
Re: [Digital BW] Re: B&W prints on the LightJet at ReedPhoto?
2003-03-05 by Mark Savoia
I just read the description on Reed Photo s web site and they must have figured some way around the limits. I will be making some phone calls to the sales
Re: [Digital BW] Re: B&W prints on the LightJet at ReedPhoto?
2003-03-05 by Mark Savoia
From all the research I have done, you could not use real black & white papers on a lightjet. It prints with three colors and not a long enough exposure since
Re: [Digital BW] Nozzle Clogs on 1280 With MIS VM Cartridges
2003-03-05 by bob_michaels
Tom: I went through an entire set of MIS VM carts in my 1280 and never had a clogging problem. An occasional bad nozzle check, but one cleaning solved it every
Mounting Oil was Re: Epson3200 - Test results/Kami
2003-03-05 by sceptre12345
... sandwich of ... and you ... to the ... Would some cover material like a clear acetate be sufficent as a cover film ? How is the negative cleaned after
Re: Refilling 1280 Cartridges
2003-03-05 by Shilesh Jani
Tom, I refill virgin cartidges (from MIS) all the time. It takes me about 30 minutes to fill a T009 cart. I have refilled the black T007, but find the hassle
Re: [Digital BW] Nozzle Clogs on 1280 With MIS VM Cartridges
2003-03-05 by Tom Husband
Hi Ed, My clog isn t life threatening yet like yours although it does seem to be getting worse. The clogs show up in all the cartridges but the black one is
RE: [Digital BW] Nozzle Clogs on 1280 With MIS VM Cartridges
2003-03-05 by Ed Mathews
I bought my 128o about 3 weeks ago. Midway through the original cartridges it developed a clog in the black head. No amount of cleaning cycles would clean
Re: [Digital BW] KAMI mounting
2003-03-05 by mh
I probably should have been more clear. It gums up IF you use another brand of tape with it. It sounds like you guys were talking about using it without tape
Re: [Digital BW] KAMI mounting
2003-03-04 by Simon Lamb
mh I thought I read on the Kami web site that the SXL 2001 doesn¹t gum up, it evaporates and you can use a wipe to clear residue if there is any. It seemed
Re: B&W prints on the LightJet at ReedPhoto?
2003-03-04 by mh
I contacted reed by phone and they verified that they do use their LightJets with traditional B&W paper with traditional chemistry. Looks to be about 8 times
Re: [Digital BW] best of the LCD monitors
2003-03-04 by Eileen Chun
I run the 17 Apple Studio display on a mac and on a pc as well. It can be done if you purchase an ADC to DVI cable, and you purchase a DVI video card. I am
KAMI mounting
2003-03-04 by mh
I thought I better mention one thing here: If you use Kami mounting fluid, you have to use Kami tape, otherwise it majorly gums up and you will have a big
[Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by mh
If you are in the USA, I would get your Kami supplies from this company: http://www.aztek.net/ otherwise you can order similar supplies from a company
RE: [Digital BW] best of the LCD monitors
2003-03-04 by Jim Panzer
But its native resolution is only 1200x1024 Hmm, sounds like a consumer type monitor for surfing the net and things, definitely check the refresh rate too!
Re: [Digital BW] best of the LCD monitors
2003-03-04 by danhcmsinccom
... I ve also checked them out. The Formac 2010 plus custom spyder looks like a winning combination. My concern is that this monitor has not yet been tested
ImagePrint questions...
2003-03-04 by Lorne Resnick
Hi, Hopefully someone who has some experience with Image Print can help me. I¹ve only started using it and have 3 issues. I¹m on Mac OSX 10.2.4 with a G4 450
RE: [Digital BW] best of the LCD monitors
2003-03-04 by Jim Panzer
Hey Dan, not being an Apple user myself I don t know if all the apple monitors are the same but...the one I have been looking at lately is the Apple Cinema
Re: [Digital BW] Digest Number 1367
2003-03-04 by Michael A. Schwarz
Sue Tallon wrote ... I couldn t agree more. Everybody s got to do what works for them. Care to share how you get such good results? Michael
Re: Refilling 1280 Cartridges
2003-03-04 by Steven Karafyllakis <stevek@evcom.net>
I for one; Initially because it s much cheaper, but continued doing it when I decied to come up with my own inkset. Also, I need to switch from color pigs to
Re: Nozzle Clogs on 1280 With MIS VM Cartridges
2003-03-04 by Jeff Korte <jeffkorte@mn.rr.com>
Tom, I ve been using a 1280 with VM inks with a CIS (nomorecarts) for about a year and a half. I developed a clog about two weeks ago that wouldn t clear.
best of the LCD monitors
2003-03-04 by Dan Honemann <dan_honemann@yahoo.com>
I m putting together a digital imaging system, and have pretty much decided on a Gateway 700XL running WinXP. The only question left is which monitor: Gateway
Refilling 1280 Cartridges
2003-03-04 by Tom Husband <thusband@sbcglobal.net>
I took a look at the refilling procedure in the files section and it sure seems time consuming (three hours), messy and, perhaps, not worth it. I guess if you
Re: Digital Negatives with 1160
2003-03-04 by Garcia, William
I also made an attempt at digital negatives with a 1270 with OEM inks and an 1160 using Piezo. I sealed the Piezo inks to the Pictorico film with a coat of
Nozzle Clogs on 1280 With MIS VM Cartridges
2003-03-04 by Tom Husband <thusband@sbcglobal.net>
I m running a new 1280 with MIS VM and VMS cartridges. I seem to be getting nozzles clogs lately. I run a nozzle check before each run and usually I have to
RE: [Digital BW] Re: Digital Negatives with 1160
2003-03-04 by Paul Roark
I don t know what Dan was doing, but I did work with a Piezo driver and the 1160 for a while. I even mixed a dye-based Piezo-compatible inkset for the digital
Mounting Oil was Re: Epson3200 - Test results/Kami
2003-03-04 by Martin Wesley
Oil mounting has been around for a long time and many products are available from heavy gels to very light weight oils like Kami. A good source in the US is
Epson 1160 for sale
2003-03-04 by Edward Shotwell
I understand that this forum is not regularly used for sale of used equipment, but I felt that there might be some interest in the following item. I have an
Re: [Digital BW] Re: Digital Negatives with 1160
2003-03-04 by Martin Wesley
... From: To: Sent: Tuesday, March 04, 2003 12:25 AM Subject: [Digital BW] Re: Digital
Re: [Digital BW] How neutral are your B&W prints on the Epson2200?
2003-03-04 by Julian Thomas
Sue - me too - I love the lightjet BW prints, but they are different from a conventional silver FB, but I love the look Julian ... From: Sue Tallon
Re: [Digital BW] Re:neutral B&W on the 2200
2003-03-04 by Sue Tallon
... Michael, The more I read posts on forums the more I realize that our individual results and observations are not universal. Our equipment and subjective
Re: [Digital BW] How neutral are your B&W prints on the Epson 2200?
2003-03-04 by Sue Tallon
... What is B/W RGB paper and where does it say at Reed that they re using B/W paper? I ve seen some stunning B/W, dead neutral, you d think it was a B/W
[Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by John Vitollo <jvlist@comcast.net>
... In the USA the Kami distributor is Aztek: http://www.aztek.com/Products/Aztek%20Supplies%20&%20Accessories.htm
RE: [Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by Bruce Kinch
... OTOH, Decca SXL 2001 was the first classical stereo LP from that company, worth about $50 in mint condition, if there are any audiophile on the list:-)
Re: [Digital BW] Epson3200 - Test results
2003-03-04 by Simon Lamb
Colin There is a source in Wimbledon in the UK. Haynes. Call +44 20 8949 5411 and ask for David. They sell it in 1 litre plastic bottles and also the Kami
RE: [Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by Alessandro Pardi
Well, the SMF is a different bottle from the SXL I used: http://www.kami-produkte.de/english/sxl.html You may
Neutral B&W -- 2200 + UC VM update
2003-03-04 by Paul Roark
With respect the issue of achieving a neutral print with the 2200, ... Even B&W ( quad ) inksets have problems with this. In fact, that is one reason why my UC
[Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by sceptre12345 <am1000@videotron.ca>
Just found this Kami supplier surfing the net. As always caveat emptor. http://www.baypressservices.com/html/kami.html Cheers, Andre
Re: [Digital BW] PMA - Las Vegas
2003-03-04 by Jo Brunenberg
Hi Cleavis, Interesting hybrid system. On their site it says: The digital enlarger system uses the latest mega pixel LCD. Do you know how many megapixel? Best
Re: [Digital BW] PMA - Las Vegas
2003-03-04 by Mark Savoia
... shooting with a digital camera, you might check out the Devere 504 DS (and keep the darkroom too). Would seem intoxicating to shoot and correct digitally
PMA - Las Vegas
2003-03-04 by Cleavis <lyonscox@cableone.net>
Just back in from PMA in Las Vegas. There is a plethora of choices out there. There was even a gallery of prints of a standard image with color references
Re: [Digital BW] Should I run epson inks through new printer?
2003-03-04 by Jerry Olson
I used the MIS VM right from the start. No problems. Jerry The inks are totally compatible.
Re: [Digital BW] Can I mix and match continuous ink system brand and inks?
2003-03-04 by Jerry Olson
It absolutely can. Used one for years. Jerry
Re: [Digital BW] Epson3200 - Test results
2003-03-04 by Ernst Dinkla
... From: Alessandro Pardi To: Sent: Tuesday, March 04, 2003 2:40 PM Subject:
[Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by Vincent Orlando <orlandovl@hotmail.com>
Alessandro, thank you for the speedy reply. Will check it out Vinny http://www.wulfsden.com ... produkte.de/english/ ... Fluid, ... someone ... from an ...
Re: [Digital BW] Epson3200 - Test results
2003-03-04 by colingruk <cconway@bstdb.org>
... success. Hi, Simon, If you find a source in Europe, preferably the UK, please let me know. I seem to remember that even in the US the minimum quantity
Re: [Digital BW] Should I run epson inks through new printer?
2003-03-04 by Jeff Korte <jeffkorte@mn.rr.com>
Thanks Paul and Martin. By the way, while the VM inks have worked very well for the past year-and-a-half, I m looking forward to the new MIS UC clone BW that
RE: [Digital BW] Re: Epson3200 - Test results/Kami
2003-03-04 by Alessandro Pardi
Vinny, Kami is a German company, and you can find all products on their website: http://www.kami-produkte.de/english/