Re: Anyone with a 1200/1270/1280
2004-03-19 by Jerry in Houston
I have found what I need and made arrangements, I want to thank everyone who responded... Jerry in Houston [Non-text portions of this message have been
Messages
Browse messages
Page 1330 of 2186 · 109257 messages matched
Re: [Digital BW] Autofx Photographic Edges
2004-03-19 by DigitalLipothymy@aol.com
In a message dated 3/19/2004 4:02:10 PM Eastern Standard Time, stevekale@btinternet.com writes: Has anyone used this set of filters with success? A friend of
Re: [Digital BW] Fragile Hahnemule prints
2004-03-19 by James Irelan
... Printguard from Lyson is supposed to be the one. I think there are problems with the Krylon. Bulldog and Lyson are actually the same, according to my
Re: [Digital BW] Re: Film Scanning for full frame printing
2004-03-19 by D. Hill
Barrett, Thanks for your input as this is the scanner I am considering for purchase, and it is great to hear that you can get the full view of the negative. I
Linux QTR2 - EP2200
2004-03-19 by Roger L Sopher
I recently got an Epson 2200 to replace the 860 I have been using for some time. It installed in Fedora without a problem, I was able to pick up the QTR PPD
Re: [Digital BW] Autofx Photographic Edges
2004-03-19 by Steve Kale
I believe this was version 6. From: Jake Hellbach Reply-To: DigitalBlackandWhiteThePrint@yahoogroups.com Date: Fri, 19 Mar 2004
Re: [Digital BW] Autofx Photographic Edges
2004-03-19 by Steve Kale
Hi Lea The image I tested on was 16 x 10 inches at 360 ppi. I didn¹t have the chance to read the manual or anything. We loaded the image in PS CS and then
RE: [Digital BW] Autofx Photographic Edges
2004-03-19 by Jake Hellbach
Hi Steve, I have version 4 which is old but I still use it for even my 13 X 19 inch prints and they look very sharp. I m not doing anything special, I just
Fragile Hahnemule prints
2004-03-19 by Ellie Kennard
I have done some beautiful prints on Hahnemuhle Photorag with my 7600 UC with Image Print. I am concerned by how very fragile the surface is. The blacks go
Re: Film Scanning for full frame printing
2004-03-19 by Barrett Benton
The film strip holders for my Minolta Dimage Scan Elite 5400 allows the entire frame to be scanned, but, of course, doesn t go out to the sprocket holes
Source for 24 x 30 sheets of Hahnemuhle Photo Rag???
2004-03-19 by Bill Schwab
Seeking a source for 24 x 30 sheets of Hahnemuhle Photo Rag? Also... suggestions of comparable papers welcomed. Thanks in advance, Bill www.billschwab.com
Re: [Digital BW] Autofx Photographic Edges
2004-03-19 by lea
I have a hunch you re doing something wrong...those edges are designed to be used on photographs and indeed I ve seen them on photos as large as 16x20 without
Re: [Digital BW] Film Scanning for full frame printing
2004-03-19 by Ernst Dinkla
... The Wess ABX500K slide mounts are exactly 36 x 24.4 mm wide. That is most of the time enough to get the edges scanned without too much stray light
Re: [Digital BW] RE: Attn Paul Roark: Confused about status of UT7 inkset
2004-03-19 by Bill Schwab
... sentiments ... product hit ... I understand pessimism and agree it has its place, but these particular problems have no comparison to those you mention.
Autofx Photographic Edges
2004-03-19 by Steve Kale
Has anyone used this set of filters with success? A friend of mine has it and I was able to try it for just a short while. The range of Edge effects in
Re: Betr.: [Digital BW] Digital negs revisited
2004-03-19 by Ernst Dinkla
... Check the silkscreen suppliers in the USA for that film. It is meant for that business in the first place. Another manufacturer is Autotype in the UK.
[Digital BW] Re: Digital negs rivisited
2004-03-19 by Doug Nielsen
... You are right Paul, the Pictorico White Film blocks UV and is unsuitable for platinum prints. Although, it works great for silver-gelitan printing. Doug
RE: [Digital BW] RE: Attn Paul Roark: Confused about status of UT7 inkset
2004-03-19 by Richard
... From: Bill Schwab [mailto:wilschwab@yahoo.com] Sent: 19 March 2004 02:41 To: DigitalBlackandWhiteThePrint@yahoogroups.com Subject: [Digital BW] RE: Attn
Epson 890 For Sale - now incl UT2 carts!!
2004-03-19 by bbiess
This is an update to the Epson 890 ad I posted early this week - Since I needed to purchase a new color cartridge for the 1280 I replaced 890 with, I am now
Re: [Digital BW] Film Scanning for full frame printing
2004-03-19 by Lawrence Smith
... My Howtek 4500 does this. I scan all my film this way. Lawrence ... Lawrence W. Smith Photography http://www.lwsphoto.com lsmith@lwsphoto.com
RE: [Digital BW] UT EZ B&W on C84 (Paul?)
2004-03-19 by Tom Moore
While waiting for the UT7 inks to become available, I found a cheap c82 and thought I d try the UT2 family that way. In reviewing the web site and speaking to
Re: [Digital BW] Attn Paul Roark: Confused about status of UT7 inkset
2004-03-19 by colin_young@yahoo.com
Thanks (and to Bill also). That clears things up. I d suggest updating your webiste, but I d rather you spent your time fiddling with ink than fiddling with
Re: New Glossy Lyson paper + inks + IJC/OPM
2004-03-19 by Roy Harrington
... overinking ... Hi Antonis, I m using the MIS inks. They are all the ultratone based inks. I debated a long time trying to decide which approach to take
Film Scanning for full frame printing
2004-03-19 by D. Hill
Does anybody know of a film scanner in which the film holder can be modified to scan the entire frame of film with the black borders? My darkroom days were
Re: [Digital BW] Anyone with a 1200/1270/1280
2004-03-19 by Jeff Magidson
Sorry Everyone.... That last message was supposed to be Off List! -Jeff
Re: [Digital BW] Anyone with a 1200/1270/1280
2004-03-19 by Jeff Magidson
Hi Jerry; I have the complete set ( Paper support adapter , Roll paper holder with a roll of paper on it and the uncurling sheet ) How does $35 plus shipping
Re: OT Upgrading OSX->10.3 and printing
2004-03-19 by px3n120x
... Turns out the Print dialog behaves properly if used by other users *but* root s it was a ownership/permissions problem which couldn t be fixed by available
Re: MIS UT2 CFS for 1280... mistake fixed
2004-03-19 by Jerry in Houston
The situation with MIS is cleared up and they are sending the right stuff and fixing the link on the website. They were very easy to deal with. Thanks for
Re: Betr.: [Digital BW] Digital negs rivisited (and virus alert)
2004-03-19 by Mark Savoia
Thanks for the research. Mark ... [Non-text portions of this message have been removed]
Re: Betr.: [Digital BW] Digital negs rivisited (and virus alert)
2004-03-19 by donbga
I ve just spent about 30 minutes of telephone hell with Agfa USA and have finally been told that this product is not available for purchase in the states. Hope
RE: [Digital BW] Re: Digital negs rivisited
2004-03-19 by Paul Roark
... PermaJet and Oriental both have the same product, but I m not sure they are any cheaper. It may not transmit UV for the processes that expose with UV
Re: Digital negs rivisited
2004-03-19 by Steven Karafyllakis
My thanks to Doug and Casper for this info; I ll probably start with the Pictorico first, if it works well I ll report back Steve Karafyllakis ... least for
Re: Digital negs rivisited
2004-03-19 by Doug Nielsen
Don Burkholder now recommends Pictorico High Gloss White Film (at least for the 2200). I am using it and find it is better than the OHP material. Unfortunately
Re: Betr.: [Digital BW] Digital negs revisited
2004-03-19 by Mark Savoia
Thanks. Mark ... [Non-text portions of this message have been removed]
Re: Betr.: [Digital BW] Digital negs revisited
2004-03-19 by Casper Cammeraat
Mark, I ordered from: COMEX Products B.V. Rijksweg 77 1411 GE Naarden The Netherlands Phone: +31 356940307 Fax: +31 356950100 but I am sure there must be
Re: Betr.: [Digital BW] Digital negs rivisited (and virus alert)
2004-03-19 by Mark Savoia
Casper, Where are you purchasing this item from? Mark ... [Non-text portions of this message have been removed]
Re: New Glossy Lyson paper + inks + IJC/OPM
2004-03-19 by Barrett Benton
Antonis, this sounds great - I currently use Lyson s Quad Black Neutral in an Epson 1160, mostly using EEM with very good results, but I d like to see what
Betr.: [Digital BW] Digital negs rivisited (and virus alert)
2004-03-19 by Casper Cammeraat
Hello Steve, Have you tried the Agfa SelectJet or Agfa CopyJet?(sheets and rolls) Have a look at: http://graphics.agfa.com/screen/selectjet/ It is a
Re: New Glossy Lyson paper + inks + IJC/OPM
2004-03-19 by Antonis
... Roy, whose carbons and whose toners are these? I guess we can t settle this without everyone in the same viewing room with lots of prints in front of us,
Re: OT Upgrading OSX->10.3 and printing
2004-03-19 by Tyler Boley
Happened here too. As well as Roy s suggestions try going to page setup and selecting it there first, then make sure paper source is right, or try a different
Re: MIS UT2 CFS for 1280
2004-03-19 by Jerry in Houston
Sadly, you are quite right. My shipment from MIS arrived today and as soon as I opened the pkg I saw there was a problem. I checked the links you cited and
Anyone with a 1200/1270/1280
2004-03-19 by Jerry in Houston
I am in need of the adapter bar that allows the adapters for the roll paper adapters to attach to the back of the printer. According to the Epson site the
Re: OT Upgrading OSX->10.3 and printing
2004-03-19 by Roy Harrington
I ve seen that happen once too. You are right that the set of options you see is just the generic setup. Its been a while so I don t remember the exact
Digital negs rivisited (and virus alert)
2004-03-19 by Steven Karafyllakis
I tried the Pictorico Overhead transp. film in my 1280 a while back, but wasn t too thrilled with the results; the film had obvious (under a loupe) banding,
Re: New Glossy Lyson paper + inks + IJC/OPM
2004-03-19 by Roy Harrington
... I finally came up with an ink setup that I really like for my 7500. Canned ink color never seemed to be quite right. So I have a pure carbon quadtone --
Re: OT Upgrading OSX->10.3 and printing
2004-03-19 by px3n120x
... wrote: I tried Epson s new driver for SP 1280 but no improvement. Same with GP, QTR. Here s what I have in the bottom pull-down menu of the
April 11x14 Print Exchange print size
2004-03-19 by Gary Benson
... The paper size submitted for this exchange must be 11x14 inches (in order to fit within a Fedex Large size box). Epson makes the Matte Paper Heavyweight
Re: New Glossy Lyson paper + inks + IJC/OPM
2004-03-19 by Tyler Boley
... and ... Sounds like you came to the same conclusion Steve and I did. The good warm is somewhere between those two sets. ... master ... whatever Epson
Re: OT Upgrading OSX->10.3 and printing
2004-03-19 by William John Smith
... Also Epson just released new drivers for both the 1280 and 2200 for OSX. [Non-text portions of this message have been removed]
RE: Attn Paul Roark: Confused about status of UT7 inkset
2004-03-19 by Bill Schwab
I ve been doing beta testing of the UT-7 inks on a new 7600 for Paul and MIS and although there have been some problems, I think the final mix is coming